• JSTS:Journal of Semiconductor Technology and Science
• /
• v.11 no.4
• /
• pp.272-277
• /
• 2011

The ambipolar behavior of tunneling field-effect transistors (TFETs) has been investigated quantitatively by introducing a novel parameter: ambipolarity factor (${\nu}$). It has been found that the malfunction of TFET can result from the ambipolar state which is not on- or off- state. Therefore, the effect of ambipolar behavior on the device performance should be parameterized quantitatively, and this has been successfully evaluated as a function of device structure, gate oxide thickness, supply voltage, drain doping concentration and body doping concentration by using ${\nu}$.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.11a
• /
• pp.32-33
• /
• 2006

In this study, in order to develop multilayer ceramic actuator for ultrasonic nozzle and ultrasonic vibrator, PMN-PNN-PZT ceramics were fabricated using $Li_2CO_3$. $Na_2CO_3$ and ZnO as sintering aids. And then, their piezoelectric and dielectric properties according to the amount of ZnO addition were investigated. The addition of ZnO improved density, dielectric constant, electromechanical coupling factor, mechanical quality factor and piezoelectric d constant of PMN-PNN-PZT ceramics due to the increase of sinterability and accepter doping effect. Electromechanical coupling factor and mechanical quality factor of PMN-PNN-PZT ceramics increased with ZnO amount up to 0.4wt% and then decreased. At the sintering temperature of $900^{\circ}C$ and 0.4wt% ZnO addition, density, dielectric constant, electromechanical coupling factor, mechanical quality factor and piezoelectric d constant showed the optimum value of 7.876g/$cm^2$, 1299, 0.612, 1151 and 369pC/N, respectively.

• Proceedings of the Korean Geotechical Society Conference
• /
• 2008.03a
• /
• pp.784-791
• /
• 2008

In this study, we recognized about application of the load distribution factor for design of tunnel in 3D numerical analysis. Generally, load distribution factor of tunnel is applied to describe 3D arching effect that can not describe when 2D numerical analysis. Through result of 3D numerical analysis, we used to apply in numerical analysis for the load distribution factor that ratio of finally displacement to displacement of construction step. But 3D numerical analysis need to apply to load distribution factor for convenience of numerical analysis. Therefore, we proposed load distribution factor that reduce time and coast. It corrected variable of advanced length in load distribution factor of 3D numerical analysis.

• Journal of Fashion Business
• /
• v.5 no.3
• /
• pp.73-84
• /
• 2001

The purpose of this study is to apply fundamental data of impression formation research by analysing and observing the various facial image that can be effected from hair style as well as be helpful for choosing suitable hair style for T.P.O in modern society. This study targeted 305 college women in Daegu and Gyung-book area. Hair Style Image Scale(HSIS)was used the scale of seven point modified the S-D(Semantic Differential) method. The analysis of impression formation effect of hair style using SPSS WIN package have completed from the principal component analysis by Varimax perpendicular rotation method and ANOVA was used to recognize the difference in impression formation according to hair style change. In the case of statistical difference was appeared, LSD post-verification was applied for that. The conclusions of this study is as followed ; 1. The factors of impression formation effected by hair style were classified as goodwill factor, refinement factor, elegance factor and individuality factor. 2. In terms of goodwill factor, long hair style showed highest level and short cut hair, bobbed hair in an order. In refinement factor, there was no difference between short cut hair and bobbed hair and both of them was higher than long hair. In elegance factor, long hair was highest and bobbed hair was lowest. In individuality factor, short cut hair and bobbed hair higher than long hair and no difference between short cut hair and bobbed hair.

• The KSFM Journal of Fluid Machinery
• /
• v.16 no.6
• /
• pp.40-47
• /
• 2013

In this paper, a numerical study was performed to investigate the performance characteristics of a pre-heater. The effects of fin pitch and fin array type(in-line, staggered, leaned array) were reported in terms of Colburn j-factor and Fanning friction factor f, as a function of Re. Three-dimensional numerical simulation has been performed by using flow analysis program, FLUENT 13.0. The results show that Colburn j-factor decreases with the decrease of fin pitch attached in the annular tube. But the fin pitch has little effect on f-factor. The staggered array and leaned array show improved heat transfer performance compared with in-line array, so that Colburn j-factor was increased. It also shows that the f-factor of leaned array is the highest in the studied range of Reynolds number.

• The Journal of Pediatrics of Korean Medicine
• /
• v.24 no.3
• /
• pp.138-149
• /
• 2010

Objectives: The purpose of this study is to estimate genetic and environmental factors which can effect growth, and predict final height using this factors. Methods: Correlation analysis and regression analysis were conducted between measurements of height and Genetic & environmental factors through survey from 1352 child & adolescent patients. Results: Factors which have correlation with height percentile are MPH(Mid-Parental Height), NBW(Neonatal body weight), anorexia, dyspepsia, atopic dermatitis, frequency of breakfast and quality of sleeping time. MPH has moderate relation, NBW and anorexia have fair relation, and other factors have linear but poor relation. Regression equation from factors which have correlation and height percentile has 26.9% of predictive power. Regression equation considering only genetic factor has 20.4%. MPH has the most effect on height percentile. Anorexia has more effect than NBW. Other factors also have small and similar effect. Conclusions: Height of parents has the most effect on growth, anorexia, dyspepsia, atopic dermatitis, frequency of breakfast and quality of sleeping time also has effect.

• The Proceedings of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.9 no.4
• /
• pp.49-54
• /
• 1995

This paper is an experimental study on the influence of the demonstration effect by color and light source in show window. This experiment used semantic differentical method in model show window of actual size. The important outcomes of this study are summarized below. 1. In the result by factor analysis, three factors are classified. They are diversity, emotion, lightness. 2. In the study on the influence by light source, incandescence lamp is the most effective light source in every items. 3. In the result of the study on the influence by color source, according to each factor bring out following result ; Green is the most effective in diversity factor and ligthness factor. Yellow is the most effective in emotion factor.

• Journal of Institute of Control, Robotics and Systems
• /
• v.5 no.4
• /
• pp.394-402
• /
• 1999

In this paper, we present an effective RLS algorithm with forgetting factor of Erlang function for the system identification. In the proposed algorithm, the forgetting factor decreases monotonically in the first stage, and then it increases monotonically in the second stage in contrary to the conventional forgetting factor RLS algorithms. In addition, annealing effect and an asymptotically stability of the proposed algorithm is discussed based on the analysis of convergency property on. Simulation results for the system identification problem indicate the superiority of the proposed algorithm in comparison to the RLS algorithm such as NLMS and Kalman filter based algorithm.

• Journal of information and communication convergence engineering
• /
• v.12 no.3
• /
• pp.140-144
• /
• 2014

A general linearly constrained adaptive array is examined in the weight vector space to illustrate the array performance with respect to the gain factor. A narrowband linear adaptive array is implemented in a coherent signal environment. It is shown that the gain factor in the general linearly constrained adaptive array has an effect on the linear constraint gain of the conventional linearly constrained adaptive array. It is observed that a variation of the gain factor of the general linearly constrained adaptive array results in a variation of the distance between the constraint plane and the origin in the translated weight vector space. Simulation results are shown to demonstrate the effect of the gain factor on the nulling performance.

• Journal of Advanced Navigation Technology
• /
• v.19 no.3
• /
• pp.244-249
• /
• 2015

High-altitude electromagnetic pulse (HEMP) is generated from a nuclear burst at high altitudes above the Earth, the electromagnetic fields reach the ground nearly simultaneously with regard to the operation time of systems. The aim of this analysis is to inquire about HEMP characteristics and to analyze about effect in orthogonal frequency division multiplexing (OFDM) system. Specifically, HEMP characteristics are classified field sources, spatial coverage, time domain behavior, frequency spectrum and field intensities in this study. Bits error rate (BER) of the receiver with the software simulation is confirmed for the HEMP effect. Q-factor made a difference about interference duration by transfer characteristics of system. When Q factor is smaller, the recovery time from HEMP interference is short. To the contrary, if the Q factor is larger, the recovery duration is lasted longer by 300-600%.