• Journal of The Korea Institute of Healthcare Architecture
• /
• v.24 no.1
• /
• pp.15-24
• /
• 2018

Purpose: The research looks at differences between the 'General ward' and the 'Comprehensive nursing ward' in Seoul Medical Center, regarding the facility improvements and changes in nursing services. It investigates and analyzes spatial problems and improvement needs through a survey and conduct investigation of staffs. It is to propose the primary data for the architectural planning of the future ward with the comprehensive nursing service. Methods: Targeting the comprehensive nursing ward, changes of the physical environment and spatial problems are analyzed through a field survey, behavior investigation, present-condition investigation, and floor plan analysis. Results: The workforce is increased by approximately twice the amount of the nursing staffs in the comprehensive nursing ward, compared to the pre-general ward. When utilizing the general ward, various spatial problems arise due to the restrictions of the facility condition. Because Sub N.S is an important facility as a part of the nursing work function in the ward of the comprehensive nursing service, the opinions of staffs must be considered when selecting a location and composing a space. Implications: It can be used as a primary data for the comprehensive nursing ward when architectural planning of a new hospital.

• Journal of Korean Society of Industrial and Systems Engineering
• /
• v.38 no.4
• /
• pp.159-167
• /
• 2015

We consider a wafer lot transfer/release planning problem from semiconductor wafer fabrication facilities to probing facilities with the objective of minimizing the deviation of workload and total tardiness of customers' orders. Due to the complexity of the considered problem, we propose a two-level hierarchical production planning method for the lot transfer problem between two parallel facilities to obtain an executable production plan and schedule. In the higher level, the solution for the reduced mathematical model with Lagrangian relaxation method can be regarded as a coarse good lot transfer/release plan with daily time bucket, and discrete-event simulation is performed to obtain detailed lot processing schedules at the machines with a priority-rule-based scheduling method and the lot transfer/release plan is evaluated in the lower level. To evaluate the performance of the suggested planning method, we provide computational tests on the problems obtained from a set of real data and additional test scenarios in which the several levels of variations are added in the customers' demands. Results of computational tests showed that the proposed lot transfer/planning architecture generates executable plans within acceptable computational time in the real factories and the total tardiness of orders can be reduced more effectively by using more sophisticated lot transfer methods, such as considering the due date and ready times of lots associated the same order with the mathematical formulation. The proposed method may be implemented for the problem of job assignment in back-end process such as the assignment of chips to be tested from assembly facilities to final test facilities. Also, the proposed method can be improved by considering the sequence dependent setup in the probing facilities.

• Journal of Korean Society of Rural Planning
• /
• v.29 no.3
• /
• pp.53-67
• /
• 2023

In this study, the problem of the idleness of public buildings in rural areas is seriously emerging, but there are no clear standards for assessing the utilization of these buildings. Therefore, this study endeavors to investigate the actual state of idleness of buildings created by rural area development projects based on the criteria for each type. As part of this study, rural facilities were selected in two locations in Sangju City and Miryang City among the target areas of the Rural Agreement. Utilization evaluation criteria were developed to identify the conditions of underutilization. In order to determine the utilization pattern for each facility type, an in-depth interview with the operator and an inspection of the facility were conducted. Based on the analysis, the degree of utilization (e.g., low use, non-use, etc.) was different for each facility type, and among the four facility types (rural tourism, culture and welfare, exercise and recreation, income-based), rural tourism was rated as the least efficient. It has been found that the operating entity's capacity has a significant influence on the utilization of facilities. Socioeconomic factors, such as a decrease in utilization rates, are greatly influenced by the operating entity's capacity. Therefore, support from local governments as well as the national level is required to recycle idle facilities. Lastly, this study suggests the need for different standards for utilization, depending on the type of facility. This moves beyond checking the degree of idleness by the same standard that was previously implemented.

• The Journal of Korean Society for School & Community Health Education
• /
• v.8 no.2
• /
• pp.1-18
• /
• 2007

Background: The study investigated the causes of safety accidents by facility, focused on safety accidents caused directly or indirectly by school facilities at elementary schools in S City. Purpose: The objective of this study is to provide materials for planning the construction of school buildings and the installation of school facilities and for improving existing facilities and ultimately to minimize mental and Physical losses from safety accidents caused by school facilities and to create pleasant education environment. Method: We selected 10 elementary schools in S City, analyzed the factors of safety accidents caused by facilities inside and outside the schools, and presented the results of the analysis including the factors of safety accidents caused by elementary school facilities. Result: It was found that safety accidents caused by elementary school facilities can be prevented to some degree by considering safety accidents in facility planning. As the safety accident rate is higher at elementary schools than at middle and high schools, it is essential to consider safety accidents in planning the construction of an elementary school and to execute safety accident prevention education in order to reduce safety accidents at elementary schools. In addition, as the curriculums are revised and new facilities are introduced for the new curriculums, elementary students' physical, psychological and environmental factors should be analyzed and studied closely and the results should be reflected in establishing the standards for the installation of elementary school facilities.

• Journal of Agricultural Extension & Community Development
• /
• v.23 no.4
• /
• pp.405-418
• /
• 2016

Farmland conservation function of 'The Farmland Act' has been being weakened according as farmland conservation system came to the dualizing condition. Overall land use issues including farmland are determined by 'The National Land Planning Act'. In this process, much farmland has been disappeared unilaterally. Above all, 'The National Land Planning Act' recognized farmland as land for development rather than looking in conservation perspective. Formulating with a 'urban(rural) plan', 'The National Land Planning Act' brings means and development methods in a variety of setting. So 'The Farmland Act', the center of farmland conservation system, lose an effect of its conservation functions. Farmland is a kind of facility made with heavy investment for agricultural purpose definitely. Therefore conversion of recognition that farmland must not be undermined indiscriminately in dimension such as urban planning facilities.

• Nuclear Engineering and Technology
• /
• v.51 no.8
• /
• pp.1951-1956
• /
• 2019

As a part of the preliminary decommissioning plan of KEPCO-NF fuel fabrication facility, DCGLs of three target radionuclides, ²³⁴U, ²³⁵U, and ²³⁸U, were derived using RESRAD-BUILD code and contaminated areas of the facility were classified based on contamination levels from the derived DCGLs. From code simulations, one-room modeling results showed that the grinding room in building #2 was the most restrictive (DCGL_gross = 10493.01 Bq/㎡). The DCGL_gross results in contaminated areas from one-room modeling were slightly more conservative than three-room modeling. Prior to the code simulation, field survey and measurements conducted by each survey unit. For a conservative approach, the most restrictive DCGL_gross in each survey unit was taken as a reference to classify the contaminated areas of the facility. Accordingly, seven rooms and 37 rooms in the nuclear-fuel buildings were classified as Class 1 and Class 2, respectively. As expected, fuel material handling and processing rooms such as the grinding room, sintering room, compressing room, and powder collecting room were included in the Class 1 area.

• Journal of Environmental Impact Assessment
• /
• v.20 no.5
• /
• pp.729-745
• /
• 2011

The purpose of this paper is to estimate the external diseconomies of an unwelcomed facility on the nearby houses. The facility and the area studied are Dangin-Ri power plant in Mapo-Gu, Seoul and the residential district surrounding it respectively. The nearby housing prices have been changed according to the time and circumstances of the public announcements about the reconstruction or removal plans of the plant. These price changes are regarded as the capitalized values of the external diseconomies due to the plant. This study is based on the hedonic price theory in order to estimate the diseconomies in monetary value. The tools for the estimation are four models of multiple regression with the transaction price as the dependant variable and various housing characteristics including the external effects of the plant as the independent variables. The sample analyzed is 833 house transactions for the past 5 years in the research area. The facts found are as follows; First, the most suitable functional form for the estimation is confirmed to be the linear model. Second, there are significant differences in influence on the housing values among the independent variables, that is, locational characteristics, physical features, and environmental changes with time. Third, the external diseconomy is estimated as \80,137,807 in case that the plant would be reconstructed in the underground of the present site, whereon a substitutional public park would be constructed and as \59,142,248 in case that the plant would move away.

• International conference on construction engineering and project management
• /
• 2011.02a
• /
• pp.234-240
• /
• 2011

Preventing incidents occurred in construction process is important for safe implementation of construction projects. Due to the complexity and magnitude of the project and moreover, poor safe planning and management, construction incidents in Korea have been increasing. Reducing construction incidents effectively, appropriate safety management program in consideration of the incident rate of each facility is to be adapted. This study analyzes incident frequency and severity rate of each facility based on the data of construction sites(about 1,560 thousand cases) recorded by Korea Occupational Safety & Health Agency for 3 years from 2007 to 2009, and the incident related data (about 40 thousand cases) of Korea Workers' Compensation & Welfare Service. The results of this study revealed that construction incident rates of 'cold refrigeration storage facilities' are the highest among building types, followed by traditional building religious building, arcade department store and shopping center. In case of other facilities, the incident rate and the rate of intensity of 'pipelining project' are the highest, followed by 'tunneling project'. These results would be used in providing safety programs beneficial for preventing construction incidents.

• The Journal of Sustainable Design and Educational Environment Research
• /
• v.18 no.3
• /
• pp.1-15
• /
• 2019

This study analyzes universities in Japan, which haves many similarities with those in Korea in certain aspects of the educational system and a common problem of reduced university admission resources, Korea's national university facility standards, policy related to nation-level university facility, and practical campus case. Through this, the study aims to examine the difference in the national approach and basic philosophy about university facilities in Korea and Japan, and also identify the major planning factors and improvement directions when establishing plans for university campuses in the future. The results of this study are as follows. First, Korea tends to promote policies related to university facilities by individual projects centered on a major pending problem or issue, while Japan has been shown to promote national university facility policies under a comprehensive mid-to-long-term plan by establishing a maintenance plan aimed at national university facilities every five years. Second, In the case of the university facility areas, the average university facility area of the examined universities in Japan is about 5.6% larger than the average university facility area in Korea. Additionally, the university facility area per student in Japan is about 13% wider than that of Korea. The total floor area of university facilities in Japan is also about 20.7% larger than that of Korea, and the university facility area per student in Japan is about 56.7% wider than that of Korea as well. Among support facilities, the total floor area of dormitories in Korea was 2.5 times wider than that of Japan, however, the acceptance rate of dormitory in Korea was 5.6% higher than Japan. Third, the university facility criteria items and systems of two countries are similar. but there are slight differences in the content such as the method of calculating student capacity, division classification, and the method of calculating the number of teachers.

• IE interfaces
• /
• v.16 no.3
• /
• pp.280-290
• /
• 2003

Many firms are trying to optimize their production and distribution functions separately, but possible savings by this approach may be limited. Nowadays, it is more important to analyze these two functions simultaneously by trading off the costs associated with the whole. In this paper, I treat a production and distribution planning problem for single-period inventory products comprised of a single production facility and multiple customers, with the aim of optimally coordinating important and interrelated decisions of production sequencing and vehicle routing. Then, I propose a hybrid genetic algorithm incorporating several local optimization techniques, HGAP, for integrated production-distribution planning. Computational results on test problems show that HGAP is effective and generates substantial cost savings over Hurter and Buer's decoupled planning approach in which vehicle routing is first developed and a production sequence is consequently derived. Especially, HGAP performs better on the problems where customers are dispersed with multi-item demand than on the problems where customers are divided into several zones based on single-item demand.