• KIEAE Journal
• /
• 제12권1호
• /
• pp.105-112
• /
• 2012

When a building is planned and designed, the design should be able to minimize the cost during the whole life cycle of the building. This study has begun to analyze LCC about the alternative design which is applicable to renewable energy facility construction. It is reviewed domestic and foreign papers about the trend of LCC technology and it is determined the analytical method to analyze the LCC of renewable energy. Regarding the review of alternatives, it is chosen the three alternatives which are able to designed combing the renewable energy facilities and it is performed the LCC analysis about each alternative. Alternative 1 is Photovoltaic + Solar Thermal + Photovoltaic /Wind Power, Alternative 2 is Geothermal + Photovoltaic, and Alternative 3 is Photovoltaic + Solar Thermal. The LCC analysis is present value method, its analytical period is 40 years and it is applied 3.2% of real discount rate. As a result, it is proved that Alternative 1 and Alternative 3 are not able to collectible the early investment cost during the analytical period and Alternative 2 is analyzed that its pay-back period of early investment cost is about 31 years. As the final outcome of this study on case analysis, it is more advantageous to use the combination of Geothermal and Photovoltaic energy than to use the other combination in LCC aspect.

• 대한기계학회논문집A
• /
• 제27권2호
• /
• pp.327-333
• /
• 2003

Most of shape defects in steel strip are originated from the structure of rolling mill itself. For instance, strip crown occurs when the work roll is deformed by the bending moment induced on roll chocks. To get rids of the shape defects, it is necessary to increase the stiffness of rolling mill. The structure change of back-up roll is one of alternative ways to increase the mill stiffness without facility revamping from 4 high mill to 6 high mill. In this research work, the new back-up roll was developed and can be used in any type of 4 high mill to reduce the strip shape defects. The developed back-up roll consists of sleeve, arbor and phase angle adjusting system for arbor. The circumference of arbor is specially machined to adapt the strip width change during rolling. The experimental cold rolling test was done to prove the effectiveness of newly developed back-up roll. The experimental rolling results show that the new back-up roll has more powerful performance in reducing the shape defects than conventional back-up roll. It was also found that the new back-up roll has higher stability for shape control. In addition to, the only sleeve surface needs to be reground and changed in most cases, so that the maintenance cost can be greatly reduced.

• 상하수도학회지
• /
• 제27권1호
• /
• pp.11-20
• /
• 2013

This Study includes the information of integrated discussion and economies of scale on local governments' sewerage treatment plant through translog function based on the reality reports of sewerage treatment plant operation published by Ministry of Environment and sewerage statistics data from 2005 to 2010. Based on analysis results from the data of 35 local governments in Jeollanamdo and Jeollabukdo, which are selected as pilot project areas of sewerage facility integration by Ministry of Environment and have low percent of sewered population, it shows the existence of economies of scale. The economies of scale on sewerage treatment show the loss of approximately 22,211 thousand ton/day in sewage treatment, it is 1.7 times compared to the average treatment amount of 35 local governments as of 2010. It means the economies of scale can be achieved by lowering operation cost along with large scale integration in installation, operation and maintenance due to the features of sewerage industry as one of network industry.

• 한국방사성폐기물학회:학술대회논문집
• /
• 한국방사성폐기물학회 2003년도 가을 학술논문집
• /
• pp.105-108
• /
• 2003

방사성 물질 취급시설인 핫셀을 출입하거나 핫셀 내의 장비 반출 등으로 인하여 핫셀 뒤편에 위치한 서비스 구역은 오염이 발생할 수 있다. 오염이 발생된 서비스 구역을 법령이 정한 표면허용오염도 이하로 제염 관리하기 위해서는 많은 방사성폐기물이 발생할 뿐만 아니라 제염하기 위한 소요인력 및 시간 또한 많이 요구된다. 이러한 문제점을 해소하기 위한 습식 제염장치는 부착된 오염원을 바닥 면으로부터 분리시키는 브러시를 회전시키는 부분, 회전브러시에 제염액 또는 세제를 공급하는 부분, 바닥 면에서 분리된 오염원과 제염액 또는 세제를 흡입하는 부분 그리고 주행하는 부분으로 구성되며, 스테인리스 재질로 제작하여 내부식성 뿐만 아니라 장치 자체의 제염도 쉽게 제작하여 조사후시험시설의 서비스 구역에서 제염장치의 성능시험을 수행하였다.

• 한국농공학회지
• /
• 제40권3호
• /
• pp.42-53
• /
• 1998

About 50 percent of irrigation and drainage facilities in our country are deteriorated as they were constructed over 40 years ago. Worsening the problems in function might be caused by these facilities' constant exposure to the elements. With these reason, efficient maintenance and management of irrigation and drainage facili- ties are required. A computerized system is tailored on the basis of the each characteristics'data of irrigation and drainage facilities. The unified management system to be introduced in this study is a package program consisting of three subprograms. Facility Management(FM) system, the first component, is a relational database system for image processing and registering the characteristics of irrigation and drainage facilities. The objective of this program is to manage the ledger of each facilities and to scan the characteristics of facilities. Telemeter(TM) system, the second component, monitors and processes the data from the sensors statistically. This system is preprogramed for the complete design of TC/TM system. Hydrological Data Management(HDM) system, the third component, executes the hydrological analysis using meteorological data. The unified management system can provide the latest information, such as image data, lists and items of facilities, and items of reforming and rebuilding etc., of the facilities to the manager. At the same time, this system can manage hydrological and meteorological data in realtime.

• 한국전자통신학회논문지
• /
• 제13권1호
• /
• pp.29-34
• /
• 2018

ESS가 연계된 시스템은 24시간 충 방전 스케줄링을 수행되어야 하므로 시스템이 중단되지 않고 운영, 관리되어야 하며, 전력 IT설비의 고장 발생이나 통신장애가 발생된 경우라도 ESS시스템의 스케줄링이 정상적으로 이루어져야 한다. 따라서, 다양한 장애가 발생하더라도 이를 능동적으로 대처하여 고정밀의 전력데이터를 수집, 관리하고 ESS 시스템을 제어하는 시스템이 요구되고 있다. 본 논문에서는 태양광 발전설비와 연계된 ESS 시스템을 대상으로 통신 장애 발생을 대처하는 통신 이중화된 전원관리유닛과 마이크로그리드 사이트 관리, 유지보수 및 모니터링을 수행할 수 있는 통합 관리 시스템을 제안한다.

• 대한설비공학회:학술대회논문집
• /
• 대한설비공학회 2008년도 하계학술발표대회 논문집
• /
• pp.30-35
• /
• 2008

This paper describes a fault detection and diagnosis (FDD) system developed for the heat source apparatus in building air-conditioning system. As HVAC&R systems in building become complex and instrumented with highly automated controllers, the processes and systems get more difficult for the operator to understand and detect the mal-functions. Poorly maintained, degraded, and improperly controlled equipment wastes an estimated 15% to 30% of energy used in commercial building. When operating a complex facility, FDD system is beneficial in equipment management to provide the operator with tools which can help in decision making for recovery from a failure of the system. Automated FDD for HVAC&R system has the potential to reduce energy and maintenance costs and improves comfort and reliability. Over the last decade there has been considerable research for developing FDD system for HVAC&R equipment. However, they are being made too much of a theoretical study, so only a small of FDD methods are deployed in the field. This study deduced an actual defect source for the heat source apparatus and suggested a low price FDD method which is ready to be deployed in the field.

• 한국CDE학회논문집
• /
• 제13권5호
• /
• pp.342-351
• /
• 2008

ISO 10303-AP241 is an Application Protocol of ISO 10303, which specifies the representation of AEC facility's life cycle information. The Working Draft of AP241 was submitted to the TC184/SC4 of ISO in July, 2007 by Korean team of ISO TC184/SC4/WG3. This paper introduces the currently developed draft Ap241 core model, and describes the life cycle support modules which are required to represent the life cycle information of AEC facilities. The draft core model is developed as a generic data model which is useful as a basis for implementation in a data warehouse. This core model could be used in combination with reference data such as PLCS RDL, Gellish table and RDL of ISO 15926. These concepts already exists in ISO 10303-AP221, AP239 and ISO 15926. In order to support maintenance and feedback of operational information concerning the AEC facilities, the AP241 team re-used many modules from AP239, and developed various STEP Application Modules which are adapted from the ISO 15926.

• 전기학회논문지
• /
• 제66권11호
• /
• pp.1605-1611
• /
• 2017

In this study, the characteristic lifetime of power facilities such as power transformers and GIS were investigated as the basis of power facility asset management. It is difficult to obtain the operation and failure data of the facilities in Korea. Therefore, the number of failures of the electric power facilities was calculated from the operation data and hazard rate shown in the overseas literatures, and the statistical analysis was performed using the Weibull distribution function. As a result of extracting and analyzing the data of the UK National Grid for power transformers, the characteristic lifetime (scale parameter) of 116.45 years was considered to be a very appropriate value for power transformer management and can be used as a comparative data of the analysis of the domestic transformers. As for the GIS, based on the Bays and Bay-Years data and the hazard rate according to the operation years of the 123kV GIS in Germany, it is found out that the characteristic lifetime of GIS is not so meaningful. It is necessary to decide a maintenance strategy and lifetime expectancy considering the characteristics of the design, materials and manufacturing process of GIS.

• 한국CDE학회논문집
• /
• 제18권3호
• /
• pp.177-188
• /
• 2013

The construction industry consists of various and massive architectural information as an architectural process includes a variety of design stages with cooperation of many disciplines. Particularly, architectural information is generated and managed through the life cycle of a building, from conceptual design stage to the construction and maintenance. A Building Information Model (BIM) serves as a shared knowledge resource for information about a facility forming a reliable basis for decisions during its life-cycle from inception onward. BIM technology accomplished quantitative development being utilized in various disciplines. However, it is necessary to develop environment and requirement for qualitative improvement of BIM based project. Particularly, requirement is very important for architectural design evaluations. The purpose of this study is to develop and apply of quality control check-list for improving the quality of architectural design in BIM environments. To achieve this purpose, the authors have investigated case study for open BIM data quality control (software, guideline and application case) and classified quality control targets according to physical/logical quality control and data quality. In addition, the authors have defined open BIM based quality control process and developed quality control check-list. Finally, the authors have developed automatic quality check system using requirements for efficient quality control based on open BIM.