• Journal of the Korean Geophysical Society
• /
• v.3 no.2
• /
• pp.99-112
• /
• 2000

The Iksan Jurassic Granite shows relatively less fractures and homogeneous rock fabrics, and is one of the most popular stone materials for architectures and sculptures. Almost mutually perpendicular rift, grain, and halfway in the Iksan Jurassic Granite are well known to quarrymen based on its splitting directions, and therefore it should exhibit orthorhombic symmetry. Theoretically, there are 9 independent elastic stiffness coefficients $(C_{1111},\;C_{2222},\;C_{3333},\;C_{2323},\;C_{1313},\;C_{1212},\;C_{1122},\;C_{2233},\;and\;C_{1133})$ for orthorhombic anisotropy. In order to characterize the static and dynamic elastic properties of the Iksan Jurassic Granite, triaxial strains under uniaxial compressive stresses and ultrasonic velocities of elastic waves in three different polarizations are measured. Both experiments are carried out with six directional core samples from massive rock body. Using the results of experiments and the densities measured independently, the static and dynamic elastic coefficients are computed by simple mathematical manipulation derived from the governing equations for general anisotropic media. The static elastic coefficients increase ar uniaxial compressive stress rises. Among those, the static elastic coefficients at uniaxial compressive stress of a 24.5 MPa appear to be similar to the dynamic elastic coefficients under ambient condition. Although some deviations are observed, the preferred orientations of microcracks appear to be parallel or subparallel to the rift, the grain, and the hardway from microscopic observation of thin sections. This indicates that the preferred orientations of microcracks cause the elastic anisotropy of the Iksan Jurassic Granite. The results are to be applied to the effective use of the Iksan Jurassic Granite as stone materials, and can be used for the non-destructive safety test.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.2
• /
• pp.254-267
• /
• 2019

Clamp resist dyeing is a resist dyeing technique in which a fabric is sandwiched between two or more pieces of woodcarving and then a pattern is expressed by dyeing. Records from nine years of King Heungdeok's reign during the Unified Silla dynasty show that the use of the clamp resist dyeing technique was banned for different garments. This was only for garments of YOOKDUPUMNYEO (六頭品女) or OHDUPUMNYEO (五頭品女). Given this, it can be assumed that clamp resisted fabrics were widely used, and the technique had been established during the Unified Silla dynasty or before. However, only the term can be found in the records. Neither its definition nor how this technique was used is explained. Also, it is difficult to assume the types and features of clamp resist dyeing due to a lack of materials. A small number of relics from the Goryeo dynasty still remain, though. Craft techniques have developed through international exchanges and have changed according to respective nations' circumstances including politics, economics, society, and culture. Hence, this research analyzed documents and relics from China and Japan, two countries neighboring the Republic of Korea, and studied the different types and features of clamp resist dyeing techniques. Clamp resist dyeing techniques were divided into monochromatic or multichromatic according to the number of colors that represented patterns, rather than according to the respective nations' features. They were also classified into mono, bilateral symmetry, or vertical-bilateral symmetry according to the structure of the patterns. Through the study of examples of inherited or reproduced dyeing techniques in China and Japan, it was confirmed that different engraving techniques, including relief, openwork, intaglio fit for the feature of a pattern and the number of colors, were applied in order to vividly represent patterns on fabric. Using small flower pattern clamp resist dyed fine tabby in Amitabha of 1302, the only relic showing its patterns and colors in Korea, as the experiment subject, this research successfully reproduced a clamp resist dyeing technique through a successful experiment based on the basic materials from the dyeing technique case study. Due to the significance of the experiment on a clamp resist dyeing technique that stopped its transmission and shows the features of the technique, this study is expected to be a basic resource that can be used for future reproductions of multichromatic clamp resist dyeing techniques. Also, it is expected to be helpful in widening and recreating the world of Korean pattern dyeing with modern dyeing techniques.

• Journal of Bio-Environment Control
• /
• v.28 no.3
• /
• pp.255-264
• /
• 2019

In this study, we conducted the hot box tests to compare the changes in thermal insulation for the four types of multi-layer thermal screens by the used period after collecting them from the greenhouses in the field when they were replaced at the end of their usage. The main materials for these four types of multi-layer thermal screens were matt georgette, non-woven fabrics, polyethylene (PE) foam, chemical cotton, etc. These materials were differently combined for each multi-layer thermal screen. We built specimens ($70{\times}70cm$) for each of these multi-layer thermal screens and measured the temperature descending rate, heat transmission coefficient, and thermal resistance for each specimen through the hot box tests. With regard to the material combinations of multi-layer thermal screens, thermal insulation can be increased by applying a multi-layered PE foam. However, it is considered that the multi-layered PE foam significantly less contributes to heat-retaining than chemical wool that forms an air-insulating layer inside multi-layer thermal screens. For the suitable heat-retaining performance of multi-layer thermal screens, basically, materials with the function of forming an air-insulating layer such as chemical cotton should be contained in multi-layer thermal screens. The temperature descending rate, heat transmission coefficient, and thermal resistance of multi-layer thermal screens were appropriately measured through the hot box tests designed in this study. However, in this study, we took into consideration only the four kinds of multi-layer thermal screens due to difficulties in collecting used multi-layer thermal screens. This is the results obtained with relatively few examples and it is the limit of this study. In the future, more cases should be investigated and supplemented through related research.

• Korean Journal of Heritage: History & Science
• /
• v.52 no.3
• /
• pp.200-221
• /
• 2019

The National Hangeul Museum houses a document list of the wedding gifts that Queen Sunwon granted her royal son-in-law, Nam Nyeong-wie, in August 1837. A total of 55 items were recorded in Hangeul Gungseo style on yellow paper. This list included four types of government officials' uniforms, casual wear, accessories, etc. The results of studying the 19th-century male officials' uniforms through this historic record were as follows. The clothing record in the List of Wedding Gifts was more accurate than that in the Dukongongju Garyedeungrok. The four types of government official uniforms for Nam Nyeong-wie included jeobok, sangbok, sibok, and gongbok. For the joebok, there was geumkwan, daehong-hangrah joebok, baeksam, ahole, seodae, gakpae, peseul, paeok, husu, and mokhwa. The record of the List confirms that baeksam was used as jungdan for joebok. For the gongbok, there was daehong-hangrah gongbok, blue seolhancho duhgre, blue saenggyeonggwangju changui, and green waehangrah kurimae. The record of the List shows that the lining of the gongbok was duhgre, and confirms, for the first time, that changui and kurimae were worn inside the gongbok. For the sangbok, there was samo, ssanghakhyungbae embroidered with golden thread, dark green cloud patterned gapsa gwandae, blue cloud patterned gapsa duhgre, blue ssangmuncho changui, and Chinese purple hwamunsa kurimae. For the sibok, there was pink gwangsa gwandae, and blue gwangcho duhgre. For the lining, blue duhgre was used. Lastly, the fabrics used for those costumes were all suitable for the climate in August.

• Korean Journal of Heritage: History & Science
• /
• v.39
• /
• pp.243-280
• /
• 2006

At the Bujang-ri Site, Seosan, South Chungcheong Province, around 220 archaeological features, including semi-subterranean houses and pits of Bronze Age and semi-subterranean houses, pits, and burials of Baekje period had been identified and investigated. In Particular, mound burials No. 5 of 13 of Baekje mound burials yielding a gilt-bronze cap along with other valuable artifacts drew international scholarly attention. The gilt-bronze cap from the mound burial No. 5 is a significant archaeological data not only in the study of Baekje archaeology but also in the study of international affairs and exchange at that time. At the time of exposure, the gilt-bronze cap was already broken into a number of pieces and seriously damaged by corrosion, and hardening and urethane foam were necessary in the process of collecting its pieces. Ahead of main conservational treatments on cap, X-ray photograph and CT(computerizes tomography) were taken in order to examine interior structure of the cap and to decide appropriate treatments. In the five layers identified in the profile of cap, a textile layer was set between a metal and a layerof bark of paper birch for avoiding direct contact of the metal and the bark of paper birch. Analyses were executed for examining textile layer and a layer of fibroid material. According to microscopic analysis, while the textile layer consisted of the simplest plain fabric with one fold among three kinds of textile structures, the layer of fibroid material was mixed with two or three kinds of fibers. A comparative analysis with standard sample using FT-IR (Fourier Transform Infrared Spectroscopy) announced that both textiles and fabrics were hemp. Analysis of kind of the paper birch resulted in barks of paper birch with 15 fold. A metallographic microscope, SEM, and WDS were used for the analysis of microscopic structures of plated metal pieces. While amalgam plating was treated as a plating method, the thickness of the plated layer, a barometer of plating technique, was ranged from $1.72{\mu}m$ to $8.67{\mu}m$. The degree of purity of gold (Au) used in plating was 98% in average, and less than 1% of silver (Ag) was included.

• Science of Emotion and Sensibility
• /
• v.23 no.4
• /
• pp.105-116
• /
• 2020

The purpose of this study is to progress the limitations and disadvantages of existing safety clothing by applying high technology to current safety clothing that is produced and distributed only with fluorescent fabrics and retroreflective materials. Therefore, the industrial suspender-type safety belt and engineering technology are introduced, designed, and fabricated to help save a life in an emergency. First, the suspender-type safety belt to be developed is designed to emit light by LED attached to the film, and the body of the belt-wearer is recognized from a distance through retroreflection from the flashing LED. It aims to support people's safety by preventing accidents during roadside work, rescue activities, and sports activities at night. Second, with the development of advanced devices when the user is in an unconscious state due to distress or falls into an unconscious state due to distress or accident, the tilt sensor of the control unit attached to the belt automatically detects the angle of the human body and generates light and sound. It is intended to further enhance the utilization by mounting a sensing and signaling device that generates a distress signal and shaping it in the form of a belt attached to a vest that can be easily detached from the outside of the garment. When the wearer falls due to an accident, the tilt sensor of this belt detects the angle change and then the controller generates a high-frequency sound and repeated LED blinking signals at the same time. In the case of conventional safety vests, it is almost impossible to detect that the person is wearing a vest when there is no ambient light, but in case of the safety belts in this study, the sound and light signals of the safety belt enable us to find the wearer within 100 meters even when there is no ambient light.

• Korean Journal of Heritage: History & Science
• /
• v.54 no.2
• /
• pp.78-97
• /
• 2021

Seojangdaeyajodo is a drawing of military night training on February 12th (lunar leap month), 1795. Focusing on the Seojangdaeyajodo, the characteristics and of the costumes worn by various types of officials were examined. There were 34 officials located near King Jeongjo in and around Seojangdae, with 27 Dangsanggwan and 7 Danghagwan. They wore three types of costumes, including armor, yungbok, and military uniforms. All of the twelve armor wearers and the five officials wearing yungbok were dangsanggwan, and the military uniform wearers included eleven dangsanggwan and six danghagwan. For the shape of the armor, the armor relics of General Yeoban, suitable for riding horses, and the armor painting of Muyedobotongji were referenced, and the composition of the armor was based on practicality. The armor consists of a helmet, a suit of armor, a neck guard, armpit guards, arm guards, and a crotch guard. The color of the armor was red and green, which are the most frequently used colors in Seojangdaeyajodo. The composition of yungbok was jurip, navy cheollik, red gwangdahoe, socks made of leather, and suhwaja. The composition of the military uniform was a lined jeolrip, dongdari, jeonbok, yodae, jeondae, and suhwaja. There were differences in the fabrics used in dangsanggwan and danghagwan military uniforms. Dangsanggwan used fabric with depictions of clouds and jewels, and danghagwan used unpatterned fabric. Moreover, jade, gold, and silver were used for detailed ornamental materials in dangsanggwan. The weapons included bows and a bow case, a sword, a rattan stick, wrist straps, and a ggakji. In the records of the King Jeongjo period, various colored heopsu were mentioned; the colors of the dongdari and jeonbok of dangsanggwan and danghagwan were referenced in various colors. It was presented as an illustration of costumes that could be used to produce objects accurately reflecting the above historical results. The basic principle of the illustration was to present the modeling standards for 3D content production. Samples of form, color, and material of the corresponding times and statuses were presented. The front, the side, and the back of each costume and its accessories were presented, and the colors were presented in RGB and CMYK.

• Korean Journal of Heritage: History & Science
• /
• v.55 no.1
• /
• pp.133-150
• /
• 2022

Calling the 21th century the age of 'cultural competition' is not an overstatement. In an era of globalization, we try to find the 'identity of our country' in our culture. 'Culture' is the unique ethnicity of the people of each country that reflects the traces of their lives. As the world is transforming into a multi-dimensional place, traditional patterns in reference to cultural uniqueness and original formativeness are the brands that represent the people. France's luxury brand, GOYARD's Y-shaped pattern naturally made during the persistent traditional handmade process is still France's representative corporate brand and is considered prestigious even after 150 years have passed. On the other hand, in low-income countries, patterns created in the natural process of weaving fabrics are succeeded as a unique cultural aesthetic and are loved by people all over the world. Like this, people living in the global multi-dimensional world look to attain the framework 'One Planet Perspective' which is to succeed their own native culture and preserve the unique culture of others. For example, in the process of international relief organizations delivering relief supplies to Columbia's "Wayu tribe" due to the water shortage in 2013, a handmade product, "Mochila Bag" was discovered. Triggered by this incident, Europe and Korea decide to import it to support the livelihood of the "Wayu tribe." Also, the aesthetic and cultural values of the traditional culture in minority tribes that have evolved through thousands of years have been listed on UNESCO and preserved worldwide. Likewise, culture doesn't suddenly appear overnight, but rather the brand representing the company is the pattern used in the trend of the era kept for over 100 years. Moreover, patterns that reflect the country's identity are inherited as the unique aesthetic of the culture. Our country does inherit the unique aesthetic of our culture, but doesn't have a 'strong image' that displays the practical value reinterpreted creatively and aesthetically to fit the modern trend. Traditional patterns are important in perspective of study and theoretical research, but the brand's image using those patterns is a new medium from the past existence continuing to the current tradition. Furthermore, this study suggests that the image of a company that uses traditional patterns will have high economical potential as a national brand.

• Journal of the Korean Society of Radiology
• /
• v.17 no.3
• /
• pp.441-447
• /
• 2023

Lead(Pb), which is currently mainly used for shielding purposes in the medical radiation, has excellent radiation shielding functions, but is continuously exposed to radiation directly or indirectly due to the harmfulness of lead itself to the human body and the inconvenience caused by its heavy weight. Research on shielding materials that are human-friendly, lightweight, and convenient to use that can block risks and replace lead is continuously being conducted. In this study, based on the commonly used polyethylene terephthalate (PET) film and the fabric material used in actual radiation protective clothing, a multi-layer thin film was realized through sputtering and vacuum deposition of bismuth, tungsten, and tin, which are metal materials that can shield radiation. Thus, a shielding film was produced and its applicability as a radiation shielding material was evaluated. The radiation shielding film was manufactured by establishing the optimized conditions for each shielding material while controlling the applied voltage, roll driving speed, and gas supply amount to manufacture the shielding film. The adhesion between the parent material and the shielding metal thin film was confirmed by Cross-cut 100/100, and the stability of the thin film was confirmed through a hot water test for 1 hour to measure the change of the thin film over time. The shielding performance of the finally realized shielding film was measured by the Korea association for radiation application (KARA), and the test conditions (inverse wide beam, tube voltage 50 kV, half layer 1.828 mmAl) were set to obtain an attenuation ratio of 16.4 (initial value 0.300 mGy/s, measured value 0.018 mGy/s) and damping ratio 4.31 (initial value 0.300 mGy/s, measured value 0.069 mGy/s) were obtained. by securing process efficiency for future commercialization, light and shielding films and fabrics were used to lay the foundation for the application of films to radiation protective clothing or construction materials with shielding functions.

• (The) Research of the performance art and culture
• /
• no.39
• /
• pp.509-547
• /
• 2019

The cocoon breeding related national ritual ceremony exercised from the beginning time of Joseon is the 'clothing culture' that has taken its role in the ritual ceremony where it demonstrates the resolution of a state that placed importance in 'things to wear'. During the reign of King Seongjong, it enhanced the level of importance by adding the 'procedure to pick up the mulberry leaved by the queen personally'. During the reign of King Youngjo, the implication of the ritual ceremony was even more expanded that there was an new emergence of new type of national ceremony for the Joseon Era with its first ritual ceremony for woman to personally administer the memorial ceremony to the 'woman divinity' in addition to the 'Jakheonrye' procedure to personally present by the queen for the cocoon breeding. This is intended to meet the status of chingyeonguirye (farming-friendly ceremony) with King Youngjo to personally cultivate the dry field after administering Seonnongje (good harvest paying ceremony) that it is conspicuously demonstrating the importance of farming and cocoon breeding activities. As a result, the Chinjam (a type of ceremony that queen personally breeds cocoon for fabrics) related ceremonial rite that was rearranged during the reign of King Youngjo was settled into 11 ceremonial rites with the expansion of its contents. It ranges from the procedure to leave the palace for carrying out the ritual ceremony to the procedure for the crown princess and Hyebin-gung to accompany the queen, ritual for the queen to devote the Jakheonrye to exercise Chinjam, the ritual for the king to announce his royal message, johyeonui (morning assembly) exercised after completing Chinjam, it is the ritual for the queen to receive the box that contained the cocoon. This type of ritual ceremony is a significant expansion when compared with the exercise carried out earlier and it is part of characteristics displayed for ritual overhaul trend in the reign of King Youngjo. In the main procedures of these ceremonial rites, the music is accompanied and the music includes folk music, inspiration and so forth. The Chinjam related ritual ceremony in the reign of King Youngjo was established in the direction to establish it as the ritual ceremony for a woman who had the divine role of the seonjamje ritual to administer the ritual in a way of having the justification and reality to be consistent.