• 한국산학기술학회논문지
• /
• 제13권1호
• /
• pp.382-389
• /
• 2012

위조된 보고서 공격은 무선 센서 네트워크에서 이벤트가 발생한 위치에 대한 송신 응답과 같은 거짓 경보를 야기하는 것뿐만 아니라 제한된 량의 에너지를 고갈시킨다. 본 논문에서는 위조된 보고서를 필터링하기 위해 확률적인 보안 필터링 기법(PFSS: Probabilistic Filtering method for Sensor network Security)을 제안한다. 제안 내용은 클러스터 헤드와 기지국과의 거리를 이용하여 기지국까지의 중간 클러스터 헤드가 검증 노드인지를 확률적으로 선택하여 보안 검증에 필요한 에너지를 줄이고, 보안 처리에 따른 핫 스팟 문제를 완화시킨다. 제안된 기법의 성능은 수식 분석과 실험을 통하여 분석하였으며, 이를 통하여 제안된 기법이 기존의 보안 검증 처리에 비해 효율적임을 알 수 있다.

• 한국시뮬레이션학회논문지
• /
• 제19권1호
• /
• pp.125-131
• /
• 2010

무선 센서 네트워크 응용 분야에서, 센서 노드는 광범위하고 열린 공간에 무작위로 배치된다. 센서 네트워크의 이러한 특징 때문에, 센서 네트워크는 공격자에 의한 노드의 포획과 획득한 노드를 사용하여 네트워크의 허위 보고서를 삽입하는 등, 물리적 공격에 취약하다. 이러한 네트워크 보안 위협은 삽입된 허위 보고서를 이용하여 전체 네트워크의 한정된 에너지를 고갈시킨다. 동적 여과 기법은 네트워크에 삽입된 허위 보고서를 탐지하고 제거하기 위해서 제안되었다. 이 기법에서, 센서 노드는 탐지성능을 향상시키기 위하여 배치 후 인증키를 재분배한다. 빈번한 인증키 재분배는 노드의 한정된 에너지의 소모를 유발할 수 있으므로 인증키 재분배의 결정은 매우 중요하다. 본 논문에서는 네트워크의 탐지 성능을 유지하고 에너지 효율을 높이기 위한 인증키 재분배 결정 방법을 제안한다. 각 노드는 일정한 주기에 맞추어 퍼지 시스템을 사용하여 인증키 재분배 여부를 결정한다. 제안 기법은 허위 보고서의 이른 탐지를 보장하고, 그 결과로 허위 보고서 삽입 공격에 대한 에너지 효율성을 보인다.

• 한국정보통신설비학회:학술대회논문집
• /
• 한국정보통신설비학회 2008년도 정보통신설비 학술대회
• /
• pp.141-145
• /
• 2008

Wireless sensor network (WSN) is expected to be used in many applications. However, sensor nodes still have some secure problems to use them in the real applications. They are typically deployed on open, wide, and unattended environments. An adversary using these features can easily compromise the deployed sensor nodes and use compromised sensor nodes to inject fabricated data to the sensor network (false data injection attack). The injected fabricated data drains much energy of them and causes a false alarm. To detect and drop the injected fabricated data, a filtering-based security method and adaptive methods are proposed. The number of different partitions is important to make event report since they can make a correctness event report if the representative node does not receive message authentication codes made by the different partition keys. The proposed methods cannot guarantee the detection power since they do not consider the filtering scheme. We proposed clustering method for filtering-based secure methods. Our proposed method uses fuzzy system to enhance the detection power of a cluster.

• 대한치과보철학회지
• /
• 제60권3호
• /
• pp.246-253
• /
• 2022

진료실에서 치과의사는 flabby tissue가 있는 의치 환자를 흔히 만날 수 있다. Flabby tissue는 인상을 채득할 때 인상재에 의해 변위되어 의치의 유지와 안정을 저해하기 때문에 선택적인 가압을 통해 인상을 채득할 필요가 있다. 따라서 본 증례에서는 개인 트레이에 window를 형성하여 flabby tissue 부위의 무압 인상을 채득하였고, 이 과정에서 모델 스캐너로 치료 의치를 스캔한 후 3D 프린터로 복제하여 개인 트레이를 제작하였다. 최종의치는 치료 의치의 전치 배열과 악간 관계, 교합에 대한 정보를 반영하여 제작하였다.

• Journal of Korean Dental Science
• /
• 제10권2호
• /
• pp.74-81
• /
• 2017

This report describes two cases of complete arch implant-supported restorations. The first patient had seven dental implants in each arch with monolithic zirconia frameworks. At four weeks' follow-up, the one-piece maxillary framework was fractured, which was re-designed and re-fabricated using laser-sintered cobalt-chrome alloy. The second patient had four implants in the mandible only. A mandibular monolithic zirconia framework and a maxillary conventional complete denture were fabricated and delivered. At five years' follow-up, the patient reported no significant discomfort. Careful consideration and monitoring of the status of antagonistic arches and stress distribution on zirconia frameworks were suggested for complete arch implant-supported fixed restorations.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2013년도 제44회 동계 정기학술대회 초록집
• /
• pp.641-641
• /
• 2013

We report the transparentsilver nanowire electrode fabricated by a direct printing process, liquid-bridge-mediated nanotransfer molding. We fabricated silver nanowire arrays by liquidbridge- mediated nanotransfer molding using the silver nanoparticle ink and PEDOT:PSS polymer. Weinvestigated the formation of silver nanowire arrays by SEM and transmittance of the transparent silver nanowire electrode. We also measured the conductivity to confirm the potential of our approach.

• 한국전기전자재료학회논문지
• /
• 제17권5호
• /
• pp.515-520
• /
• 2004

We report on the development of a Piezoelectric valvc that is designed to have a high reliability for fluid control systems, such as mass flow control, transportation and chemical analysis. The valve was fabricated using a MCA(multilayer ceramic actuator), which has a low consumption power, high resolution and accurate control. The fabricated valve is composed of MCA, a valve actuator die and an seat die. The design of the actuator dic was done by FEM(finite element method) modeling, respectively. And, the valve seat die with 6 trenches was made. and the actuator die, which possible to optimize control to MCA, was fabricated. After Si-wafer direct bonding between the seat die and the actuator die, MCA was also anodic bonded to the scat/actuator die structure. PDMS(poly dimethylsiloxane) sealing pad was fabricated to minimize a leak-rate. It was also bonded to scat die and stainless steel package. The flow rate was 9.13 sccm at a supplied voltage of 100 V with a 50 % duty ratio and non-linearity was 2.24 % FS. From these results, the fabricated MCA valve is suitable for a variety of flow control equipments, a medical bio-system, semiconductor fabrication process, automobile and air transportation industry with low cost, batch recess and mass production.

• Journal of Information Display
• /
• 제7권1호
• /
• pp.7-11
• /
• 2006

In this paper, we report the fabrication of high quality polymer walls by using a monomer containing fluorine (F-monomer). Polymer walls with no phase retardation were fabricated by using photo-polymerization induced anisotropic phase separation of the mixture composed of liquid crystal (LC) and F-monomer. Thanks to the immiscibility of fluoride, we could form high quality polymer walls with no light leakage. We measured electro-optic characteristics of a twisted-nematic (TN) LC cell whose polymer walls were fabricated by using the F-monomer, and the measurements were compared with that fabricated by using the monomer without fluorine.

• 한국표면공학회지
• /
• 제32권6호
• /
• pp.703-708
• /
• 1999

Silicides have been used extensively in ULSI logic device fabrication as contact materials for the active areas as well as the poly- Si gates. NiSi is a promising candidate for submicron device application due to less volume expansion, low formation temperature, little silicon consumption, and large stable processing temperature window. In this report, the microstructure of nickel silicides fabricated with a thermal evaporator has been investigated. We observed systematic transformation of Ni silicides of $Ni_2$Si, NiSi, $NiSi_2$, as annealing temperature increases. All the silicides have been identified by a X-ray diffractometer (XRD). The cross-sectional microstructure of silicides was examined by a transmission electron microscope (TEM) equipped with a energy dispersive spectrometer(EDS). The surface roughness of silicides was measured by scanning probe microscope(SPM). Although we observed thin oxide layer existed at the $Ni/NiSi_{x}$ interface, we fabricated successfully $550\AA$-thick planar Ni-monosilicide at the temperature range of$ 400~700^{\circ}C$.

• 한국정보디스플레이학회:학술대회논문집
• /
• 한국정보디스플레이학회 2009년도 9th International Meeting on Information Display
• /
• pp.534-536
• /
• 2009

We have fabricated solution-processed zinc-tin oxide thin film transistors (TFTs) and simple circuits on glass substrates. We report a solutionprocessed zinc-tin oxide TFTs on silicon wafer with mobility greater than 9 $cm^2/V{\cdot}s$ (W/L = 100/5 ${\mu}m$) and threshold voltage variation of less than 1 V after bias-stressing. Also, we fabricated solution-processed zinc-tin oxide circuits including inverters and 7-stage ring oscillators fabricated on glass substrates using the developed zinc-tin oxide TFTs.