• 대한가정학회지
• /
• 제31권2호
• /
• pp.189-203
• /
• 1993

The objective of this study was to investigate the changes of the fabric absorbency, stiffness and antistatic property by using a fabric softner at laundering. The samples selected in this study were cotton and polyester fabrics. The cotton fabric was treated with 1/2 times(0.035%), 1 time(0.07%), 3 times(0.21%) and 10 times(0.7%) of the commercially suggested concentration (0.07%) of the fabric softner. And polyester fabric was done at 1 time(0.07%) of that. In order to examine the effect of the fabric by using a fabric softner, the abstraction of a surface active agent and quantitative analysis was performed by using a UV/VIS Spectroscopy and the correlations among the absorbency, stiffness and antistatic property was analyzed. The results obtained from this study were as follows; 1. In the cotton fabric, fabric softner gave the degradation of absorbency, and stiffness improvement was not shown by repeated fabric softner on the cotton fabric. 2. In the polyester fabric, the absorbency increased and the stiffness in creased very slightly. Specially, it is desirable to use fabric softner on the polyester due to improvement of antistatic property.

• 한국의류학회지
• /
• 제44권1호
• /
• pp.159-174
• /
• 2020

We selected 100% cotton fabric, 100% Hanji yarn fabric and two kinds of cotton / Hanji yarn blended fabrics and fused them with three kinds of interlinings in order to examine changes to the physical properties and the post-adhesion physical properties of Hanji yarn blended fabrics. Changes in KES values were examined after fusing. First, EM, B, 2HB, MMD values of Hanji yarn blended fabrics were higher than cotton fabric, and LT, RT, G, 2HG, LC, WC values of cotton fabric were higher than Hanji yarn blended fabrics. Tensile recovery was lowered, bending stiffness was increased, and shear stiffness was lowered when Hanji yarn was mixed. Second, the KES value of LT, B, 2HB, G, 2HG, LC, WC increased after fusing, while the EM, MMD values decreased. SMD was shown to decrease or increase depending on the type of fabric. The adhesive effect on bending stiffness and shear stiffness due to the mixing of Hanji shows a different tendency in the comparison of α_B and α_G.

• 한국의류학회지
• /
• 제28권7호
• /
• pp.1029-1036
• /
• 2004

The fragrant fabrics were prepared by treatment with eucalyptus microcapsules. 100% cotton fabric, 100% polyester fabric and 100% wool fabric were used as test specimens. Using pad-dry-cure method, microcapsules were attached on each specimen by acrylic binder under conditions of varying concentration. Surface property, stiffness, and air permeability of fragrant fabrics were evaluated. As increasing concentration of binder, add-on yield was increased. Add-on yield was decreased with increasing laundering cycle, especially in polyester fabric. As the concentration of binder was increased, the properties of stiffness and air permeability were decreased. Also it fumed out that pad-dry-cure method was not suitable to polyester fabric.

• 한국의류학회지
• /
• 제27권8호
• /
• pp.883-891
• /
• 2003

In this study, a change of hand of fabrics dyed with persimmon juice was measured using Kawabata Evaluation System. Using various cotton fabrics, linen fabric and silk fabric used frequently for persimmon juice dyeing, we examined the changes of physical properties and hand according to persimmon juice dyeing and washing. The dynamic characteristics of hand were measured tensile, shear, bending, compression, surface properties, thickness and weight. Linearity of load-extention and tensile resilience were increased in all kinds of fabrics after dyeing. Tensile energy decreased in cotton fabric 2(gauze), cotton fabric 3(muslin) and linen fabric. Shear stiffness and hysteresis of shear increased in most of fabrics. Bending rigidity of the bending property and hysteresis of bending, linearity of compression of the compression property, compression energy and compression resilience increased in all kinds of fabrics after dyeing. Thickness and weight increased much in all kinds of fabrics after dyeing. In the primary hand value, stiffness and anti-drape stiffness increased in all kind of fabrics after dyeing. The fullness and softness, crispness, scrooping feeling and flexibility with soft feeling decreased. As the stiffness after persimmons dyeing increased, it was suitable for clothes material of summer.

• 로봇학회논문지
• /
• 제17권2호
• /
• pp.230-237
• /
• 2022

A technology that allows users to feel the elasticity of fabric through force feedback in the fashion and textile fields is very helpful to related manufacturing and sales areas. Currently bundle of fabrics, so called Swatch, is the only available way for the designer, manufacturer and the end-user to feel the fabrics. Images and video clips provide only visual characteristics, hence touch and stiffness are also very important characteristics to check beforehand. A study is conducted on a haptic device, which estimates the amount of change in the length of the virtual fabric and generates resistive force so that the user could feel the fabric stiffness. Since cables that can only transmit the tensile force are used, a force realization method is proposed, and it is verified numerically and experimentally.

• 대한가정학회지
• /
• 제40권7호
• /
• pp.15-24
• /
• 2002

In this work, the effect of fusible interlining on the appearance related properties and mechanical characteristics of Lyocell fabric after fusing was investigated. Two different types(20's and 10's) of Lyocell face fabric with six different interlining(by thickness and structure) for earth Lyocell fabric were examined. In order to establish the optimum fusing condition for the different face fabric and interlining, peel strength of each fused fabric was measured, which was dependent on the fusing temperature, pressure, and time. The characteristics related appearance and mechanical characteristics of each fused fabric were determined. The results are as follows: The peel strength was excellent, when the fabric was fused with the force of 3kgf/$textrm{cm}^2$ at $120^{\circ}C$ for 15seconds. Flex stiffness, G, 2HG, 2HG5(shear), B, 2HB(bending) of 100% Lyocell fabric 10's were higher than those of 100% Lyocell 20's. Flex stiffness, crease recovery, G, 2HG, B, 2HB of thicker woven interlining were higher than those of thinner woven interlining. Crease recovery of twill interlining were higher than those of plain interlining. In case of shear and bending properties, however, plain interlining was higher than twill interlining. Flex stiffness, crease recovery, G, 2HG, 2HG5, B, 2HB of nonwoven interlining were higher than those of woven interlining. In case of drapability, however, woven interlining was higher than nonwoven interlining.

• 한국의류학회지
• /
• 제8권2호
• /
• pp.47-57
• /
• 1984

Effect on the hand value and mechanical properties of blend ratio and weight had been investigated Oil summer suits for men. Relation between the mechanical properties and the deformation in behavior was also studied. The mechanical properties which influence the hand values and total hand value had been discussed and the relation between mechanical properties, hand values and fabric count had, too. As result, the following conclusions had been obtained. 1) The values of tensile properties increased with the increase of blend ratio of wool. The values of surface properties increased according to the increase of blend ratio of polyester. 2HB(bending properties) of polyester/wool blend showed higher value than that of $100\%$ wool, but there was no change in the shearing properties according to the blend ratio. The values of stiffness, crispness and anti-drape stiffness of blend fabric showed higher values than those of $100\%$ wool fabric. The value of fullness (including softness) of blend fabric showed lower value than that of $100\%$ wool fabric. 2) The correlation between hand values and mechanical properties showed following order. in stiffness : bending properties>surface properties in crispness: surface properties>bending properties in anti-drape stiffness: bending properties>surface properties>shearing properties.

• 한국염색가공학회지
• /
• 제33권4호
• /
• pp.210-219
• /
• 2021

It was intended to conduct basic research to reduce development lead time and cost consumed in DTP process technology development. For the simulation of HTPE fabric, virtual engineering software was used to generate fiber model, yarn model, fabric model, and finite element model of HTPE fiber. The purpose of this study is to analyze the correlation and error rate between the stiffness numerical analysis results according to the direct DTP process parameters using reactive dyes in the generated finite element model and the stiffness measurements of the actual sample ac- cording to ASTM D1388. And, after dyeing the HTPE plain fabric according to the direct DTP process parameters, we want to analyze the dyeability of the HTPE fabric fabrics according to the direct DTP process parameters through the color fastness analysis. When looking at the results of the analysis of the finite element model, a higher value was shown when the distance between the nozzle and the fabric was 3mm than when the distance was 10mm. When the distance between the nozzle and the fabric was 10mm and 7mm, the reactive dye did not penetrate sufficiently, resulting in poor clarity when viewed with the naked eye.

• 한국생활과학회지
• /
• 제16권5호
• /
• pp.979-986
• /
• 2007

The purpose of this study is to investigate the dyeability, and the hand of soybean/cotton blended fabric after dyeing with natural and synthetic dyes. Soybean/cotton blended fabrics dyed with extracted solution from turmeric, sappan wood, gardenia and synthetic dyes(weak-acid dyes, reactive dyes, direct dyes). The hand value of soybean/cotton blended fabrics dyed with 6 different dyes was measured using Kawabata Evaluation System. The results are as follows; 1. The K/S value of the soybean/cotton blended fabric dyed with sappan wood extracts was the highest. 2. The color fastness of the soybean/cotton blended fabric dyed with reactive dyes was excellent. The fastness to the light of the same fabric was much better than the other fabrics. 3. Linearity of load-extension and tensile energy of the soybean/cotton blended fabric dyed with sappan wood extracts showed very high. Shear stiffness of the soybean/cotton blended fabric dyed with weak-acid dyes was much higher than that of fabric of dyed with reactive dyes. Bending property of the fabrics dyed with natural colorants(sappan wood, gardenia) showed very high, but that the fabric dyed with reactive dyes was very poor. 4. In the primary hand value, stiffness and anti-drape stiffness of the fabric dyed with weak-acid dyes showed the highest. Fullness and softness of the fabric dyed with weak-acid dyes showed very low.

• 패션비즈니스
• /
• 제19권2호
• /
• pp.23-35
• /
• 2015

In this study, the effect of shrink-resist treatment agent on the wool finishing, specifically anti-felting of wool product was studied. We aimed at providing preliminary data leading to the diversification of high-value added fashionable wool product. Two type of wool fabrics, dense and sheer, were employed. The fabric specimens were treated with solutions of shrink-resist treatment agent with wet pick-up rate 110%, 130%, and 150%, respectively, by using a padding mangle. The solution treated fabric specimens were then dried at room temperature first, at $90^{\circ}C$ for 15 minutes in a drying oven, and finally cured at $130^{\circ}C$ for 3 minutes. Cured wool fabric specimens were then subjected to a felting process. The physical and mechanical properties, including shrinkage rate along warp/filling direction, thickness at specified measurement pressure, drape stiffness, and air-permeability, were analyzed. After felting process, the shrinkage rates of wool fabric specimens, treated with shrink-resist treatment agent, were lower than those of control wool fabric specimens. The stiffness values of wool fabric specimens measured by using Flexometer were increased.