• Journal of the Korean Society for Railway
• /
• v.9 no.4 s.35
• /
• pp.412-418
• /
• 2006

In this paper we deal with the APARP theory which has been applied for UK railway system and risk assessment method which has been using in the domestic railway system for the safety demonstration. Both techniques are applied to the ATP wayside equipment for interface. Also, fur the applications of each techniques a analysis of the safety activity and a possibility of the application of ALARP theory are evaluated. Finally, we generate requirements of the safety demonstration for the future domestic railway system by way of the analysis of some assumptions and requirement data which can be applied to the risk assessment of ALARP.

• Journal of the Korean Society for Railway
• /
• v.9 no.3 s.34
• /
• pp.264-270
• /
• 2006

In this paper we present a safety plan to be applied to the development of the TCS(Train Control System). The safety plan that can be applied to the life cycle of a system, from the conceptual design to the dismantlement, shows the whole process of the paper work in detail through the establishment of a goal, analysis and assessment, the verification. In this paper we study about the making a plan, the preliminary hazard analysis, the hazard identification and analysis to guarantee the safety of the TCS. The process far the verification of the system safety is divided into several steps based on the target system and the approaching method. The guarantee of the system safety and the improvement of the system reliability is fellowed by the recommendation of the international standards.

• Proceedings of the KIEE Conference
• /
• 2015.07a
• /
• pp.553-554
• /
• 2015

This paper presents the selection method of Minimal Cut Sets(MCS) for substation reliability evaluation. We used the Quality solution in order to model the FT for the substation equipment. Quantitative analysis is performed to estimate the probability of top event occurrence and unreliability of the substation component. In this result, it means that reliability indices which can be predict get electricity services and better maintenance in substation management.

• The Journal of the Korea Contents Association
• /
• v.11 no.10
• /
• pp.49-58
• /
• 2011

Fault Tree Analysis(FTA) builds fault trees to perform safety analysis of systems. However, building fault trees depends on domain knowledge and expertize on target systems and consumes lots of time and efforts. In this paper, we propose a technique that builds fault trees systematically based on state-transition models which are software design artifacts. For the end, this paper identifies conditions that should be satisfied to guarantee safety of state-transition models and develop templates for fault tree construction. This paper also describes the results of appling the proposed method to railway crossing control system.

• Journal of the Korea Safety Management & Science
• /
• v.9 no.5
• /
• pp.157-165
• /
• 2007

Currently, there are two major problems in professional engineer(PE) licensure system in Korea to be accredited internationally. One is a incompleteness of system connecting the licensure and the accredited engineering education program and the other one is a insufficient working experience condition required for achieving PE license. Therefore, these two problems are setbacks hindering Korea's PE license accredited internationally. In this study, international tendency stream on mutual accreditation of PE license are reviewed first, and the PE licensure system of the major countries are compared and analyzed. Based on the results, requirements improvement plan are suggested and the gradual implementation method are suggested also.

• Proceedings of the KSR Conference
• /
• 2006.11b
• /
• pp.1468-1476
• /
• 2006

The goal of this thesis is to support safety and reliability characteristics of software intensive critical systems. The verification method developed is innovative from current state of the art in what concerns the verification viewpoint adopted: focusing on software faults, and not, like many other approaches purely on fulfilling functional requirements. As a first step and based on a number of well defined criteria a comparison was made of available literature in the area of static non formal non probabilistic software fault removal techniques. But, None of the techniques evaluated fulfilled all criteria set in isolation. Therefore a new technique was developed based on a combination of two existing techniques: the FMEA and FTA. These two techniques complement each other very well. It is possible to integrate both techniques with commonly used techniques at system level. The resulting new technique can be shown to combine nearly all aspects of existing fault removal techniques.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• v.1
• /
• pp.471-475
• /
• 2006

For years, Korea, China and Japan have been continuously increasing intra-trade. In addition, by concluding FTA (Free Trade Agreement) among Korea, Japan and China, the trade capacity will be increased. In this way, the increasing trade capacity will induce to change north-east Asian economy. This paper researches which method is more economical and efficient in the aspect of the transportation time and distance, after comparing the existing marine transportation network with new intermodal transportation network considering TKR.

• Journal of Korean Society for Quality Management
• /
• v.30 no.4
• /
• pp.164-173
• /
• 2002

The first product liability laws went into effect in Korea in July 2002. A person who suffers personal injury or damage to property due to defects in a product may sue both the manufacturer and the seller of the product under the principles of Korea tort law. This paper presents an integrated methodology which is called the QDRD(Quality deployment and reliability deployment) for hazards analysis in new product designs. QDRD applies QFD, FMEA and FTA to identify the hazards component, hazardous situations and hazardous events which could lead to an accident. An example is provided to demonstrate hazards analysis on a product using the QDRD method.

• Journal of Aerospace System Engineering
• /
• v.15 no.6
• /
• pp.50-58
• /
• 2021

Byteflight is developed based on RS-485 communication (an international standard), and it can be used as a data bus during the operation of an integrated avionics system in the latest aircraft. Therefore, the integrated avionics system can perform an effective and safe flight mission only when the accurate and seamless display of flight information, communication, and accurate functions of navigation are implemented. In this study, cause analysis and failure investigation were performed on screen abnormalities and communication interruptions due to signal interference in the Byteflight data bus of the integrated avionics system during aircraft operation. To improve signal interference between avionics units, the branch point and wiring path of the Byteflight data bus were changed, and the verification result of the improved method was also described.

• Korea Trade Review
• /
• v.46 no.4
• /
• pp.219-234
• /
• 2021

Armington elasticity has been a methodology for analyzing how much imports could increase in response to importing price cuts, assuming the possibility of incomplete substitution of domestic and imported products. This study calculates Armington elasticity values in Korean fisheries sector and presents an analysis method for classifying items based on price and preference differences. The model is modified reflecting the characteristics of the fisheries market along with the typical OLS, PAM, and ECM models. The result's implication is that products with a high import growth rate do not necessarily show a high Armington value, but it could be seen that price is not the only factor facilitating fisheries imports increase. Considering the items of which demand increases due to importing price cuts have an indiscriminate demand between domestic and imported products, the results could be interpreted that the Korean fisheries importing market has been easily affected by the changes in import prices. Fisheries grouping by price and preference demonstrates that explanatory variables other than price should be considered when estimating import demand.