• Journal of the Korea Safety Management & Science
• /
• v.9 no.2
• /
• pp.97-111
• /
• 2007

In risk assessment, there are several methods such as Safety Review, Checklist, FMEA(Failure Mode and Effect Analysis), FTA(Fault Tree Analysis), ETA (Event Tree Analysis) etc, however, the level of accident is indentified by the probability of accident and severity resulting from accident which used widely in assessing accidents and disasters. In this paper, the risk assessment method to decide the level of risk will be introduced by using severity, frequency and detection according to accident theory.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 1997.04a
• /
• pp.27-34
• /
• 1997

In this paper, systematic and comprehensive approaches are suggested for the application of quantitative PRA techniques especially for those risk events that cannot be easily evaluated quantitatively In addition, dominant risk events are identified based on their occurrence frequency assessed by both actual survey of construction site conditions and the statistical data related with the probable accidents. Practical FTA(Fault Tree Analysis) and ETA(Event Tree Analysis) models are used for the assessment of the identified risks. When the risk events are lack of statistical data, appropriate Bayesian models incorporating engineering judgement and test results are also introduced in this paper. Moreover, a fuzzy probability technique is used for the quantitative risk assessment of those risk components which are difficult to evaluate quantitatively.

• Journal of the Korean Society of Safety
• /
• v.33 no.6
• /
• pp.37-41
• /
• 2018

Process safety technology has developed from qualitative methods such as HAZOP (hazard and operability study) to semi-quantitative methods such as LOPA (layer of protection analysis), and quantitative methods are actively studied these days. Quantitative risk assessment (QRA) is often based on fault tree analysis (FTA). FTA is efficient, but difficult to apply when failure events are not independent of each other. This problem can be avoided using a Markov process (MP). MP requires definition of all possible states, and thus, generally, is more complicated than FTA. A method is proposed in this work that uses an MP model and a Weibull distribution model in order to construct a reliability model for multiple dependent failures. As a case study, a pressure safety valve (PSV) is considered, for which there are three kinds of failure, i.e. open failure, close failure, and gas tight failure. According to recently reported inspection results, open failure and close failure are dependent on each other. A reliability model for a PSV group is proposed in this work that is to reproduce these results. It is expected that the application of the proposed method can be expanded to QRA of various systems that have partially dependent multiple failure states.

• Journal of Advanced Research in Ocean Engineering
• /
• v.3 no.3
• /
• pp.125-135
• /
• 2017

The paper considers the practical application of the FMEA(Failure Mode and Effect Analysis) method to assess the operational reliability of the LNG(Liquefied Natural Gas) transfer system, which is a potential problem for the connection between the LNG FPSO and LNG carrier. Hazard Identification (HAZID) and Hazard operability (HAZOP) are applied to identify the risks and hazards during the operation of LNG transfer system. The approach is performed for the FMEA to assess the reliability based on the detection of defects typical to LNG transfer system. FTA and FMEA associated with a probabilistic risk database to the operation scenarios are applied to assess the risk. After providing an outline of the safety assessment procedure for the operational problems of system, safety assessment example is presented, providing details on the fault tree of operational accident, safety assessment, and risk measures.

• Proceedings of the Korean Institute of Industrial Safety Conference
• /
• 2002.05a
• /
• pp.381-386
• /
• 2002

2002년 7월 1일부터 시행되는 제조물 책임법에 대비하여 기업에서 준비하여야 하는 사항중에 가장 어려움을 느끼는 부분중의 하나가 제품의 안전성 평가 부문이다. 제품의 안전성 평가는 과거의 성능검사나 특성검사가 아니라, 사용자의 오사용으로 야기될 수 있는 위험성의 평가까지도 고려하여야 한다. 이에 대표적인 정량적 안전성 평가기법인 FTA(Fault Tree Analysis)를 사용하여 전기 밥솥에 대한 정량적 평가를 실시하여 보았다. 전기밥솥에서의 잠재위험 중 가장 피해가 클것으로 생각되는 화재를 정상사상으로 하고 이에 대하여 m.cutset 분석과 빈도분석 등을 시행하여 제품안전성평가의 과정과 분석방법들을 설명한다.(중략)

• Journal of IKEEE
• /
• v.23 no.4
• /
• pp.1208-1217
• /
• 2019

The life-cycle prediction of the sub-module which is the unit system of MMC is very important from the viewpoint of maintenance and economic feasibility of HVDC system. However, the life-cycle prediction that considers only the type, number and combination of parts is a generalized result that does not take into account the operating condition of the sub-module, and may significantly differ from the life-cycle of the actual one. Therefore, we design a fault tree for the purpose of reflecting the operation characteristics of the full-bridge sub-module and apply the MIL-HDBK-217F to the failure rate of the basic event to predict the life-cycle of the full-bridge sub-module. It compares the life-cycle expectancy of the conventional failure rate analysis with the proposed fault-tree analysis and compares the lifetime according to whether the redundancy of the full-bridge sub-module is considered.

• Proceedings of the KSR Conference
• /
• 2008.06a
• /
• pp.1518-1523
• /
• 2008

Train collision and derailment are types of accident with low probability of occurrence, but they could lead to disastrous consequences including loss of lives and properties. The development of the risk assessment model has been called upon to predict and assess the risk for a long time. Nevertheless, the risk assessment model is recently introduced to the railway system in Korea. The classification of the hazardous events and causes is the commencement of the risk assessment model. In previous researches related to the classification, the hazardous events and causes were classified by centering the results. That classification was simple, but might not show the root cause of the hazardous events. This study has classified the train collision and derailment based on the relevant hazardous event including faults of the train related the accidents, and investigates the causes related to the hazardous events. For the risk assessment model, FTA (fault tree analysis) and ETA (event tree analysis) methods are introduced to assess the risk.

• Journal of the Korean Society of Safety
• /
• v.36 no.4
• /
• pp.12-19
• /
• 2021

This paper presents a safety assessment method for FTA-based induction heating systems; the failures and causes of electrical fire are first analyzed for each part and module qualitatively, and methods to manage high probabilities of failure and electrical fire are considered, thereby improving the reliability of the induction heating system. The cumulative importance value (ACC) of the minimal cut set is drawn by setting failure as the top event, and STACK and SMPS are observed to account for about 70% of the induction heating system failures. Thus, intensively managing the basic events contained in the minimal cut set of failures for STACK and SMPS is expected to provide effective and stable operation of the induction heating system. When electrical fire is set as the top event, the STACK percentage is 90%. Accordingly, the current IGBT is changed to a FET to increase the applied voltage and prevent induction heating system failure, and a heat sink plane is installed to prevent FET heating caused by switching, thereby preventing an electrical fire. By classifying the parts and modules of the induction heating system in detail and by applying FTA based on actual failure rates and relevant data, more practical and reasonable results may be expected. Hence, continuous research must be conducted to ensure safety when using induction heating systems.

• Journal of Digital Convergence
• /
• v.15 no.8
• /
• pp.69-83
• /
• 2017

This study aims to analyze the causes of a new product failure by using system safety methods, focusing on the case of Samsung Galaxy Note7. However, when analyzing the causes of a product failure, if only technical problems are too emphasized, it is likely to miss other more meaningful causes of a failure. Thus, we claim that the root causes of a product failure should be identified in a broad perspective of integrated systems that include non-technical as well as technical elements. With this viewpoint, we investigated the failure of Samsung Galaxy Note7, by using Root Cause Analysis(RCA) and Fault Tree Analysis (FTA). The results showed that it is necessary to address not only the technical issues but also other non-technical issues, such as a very impetuous launch of a new product due to a very tough competition in the market. Additionally, we also found that RCA and FTA could be a useful tool for analyzing the causes of a new product failure from the viewpoint of an integrated system comprising technical and management elements.

• Journal of the Korean Institute of Gas
• /
• v.7 no.3 s.20
• /
• pp.1-6
• /
• 2003

This study has suggested a decision method which determine optimum investment level for safety management by process risk assessment at gas governor station. Hazard and operability study(HAZOP), fault tree analysis(FTA) and consequence analysis(CA) were carried out and potential accident cost and benefit for safety management were estimated. As a result, we could be found the trend of safety cost and benefit by the nonlinear regression method and could be determined the optimum investment level for safety management from analysis of safety management cost and potential accident cost.