• 대한한방내과학회지
• /
• 제38권4호
• /
• pp.501-508
• /
• 2017

Objective: This study evaluated the effects of traditional Korean medicine on a patient with hyperthyroidism, who could not use antithyroid medication due to an adverse reaction to methimazole. Methods: Herbal medicine was administered and acupuncture was carried out. A thyroid function test was used to evaluate the effects of the treatment. Results: After treatment with traditional Korean medicine and therapy, the patient showed significant improvements in symptoms and FT4 levels. Conclusion: This case proved that traditional Korean medicine can be used for patients who have adverse reactions to antithyroid medication; however, studies of larger populations are required in the future.

• 한국세라믹학회지
• /
• 제40권5호
• /
• pp.434-440
• /
• 2003

초거대 자기 저항 물질인 페로브스카이트 L $a_{0.8}$C $a_{0.2}$Mn $O_3$의 분말을 졸-겔방법으로 제조하였다. Lanthanum(III), Calcium(II) 그리고 Manganese(III) 2,4-Pentanedionate를 Propionic acid와 methane떠 혼합용매를 사용하고 PEG (l5 wt%) 용액을 첨가 하여 안정한 졸용액을 합성하였고 FT-IR spectroscopy로 반응의 진행 정도를 관찰하였다. L $a_{0.8}$C $a_{0.2}$Mn $O_3$ 겔 분말에 대해 온도를 변화시키면서 열처리하여 FT-IR, CP/MAS $^{13}$C solid state NMR spectroscopy와 XRD등을 이용해 구조변화를 관찰하였다. 열분석은 TG/DTA로 측정하였으며, FE-SEM을 통해 입자크기와 균일도를 관찰하였고, 양이온 조성 비율을 알아보기 위해 ICP-AES를 측정하였다. 자성 특성을 규명하기 위해 VSM을 이용하여 자기 모멘트를 측정하였으며, 상자기성 에서 강자기성으로 전이되는 큐리온도( $T_{c}$)를 관찰하였다.

• 한국식품영양학회지
• /
• 제25권4호
• /
• pp.968-973
• /
• 2012

This study analyzes the structure types of salmon oil to evaluate the purity of salmon oil products based on the 38 different types of imported salmon oil products distributed in the Republic of Korea. The major types of omega-3 foods in the salmon oil are ethyl ester (EE) and triglyceride (TG). If the salmon oil contained potential contaminants and was processed in order to remove it, EE type omega-3 fatty acids are found in concentration. This provides a good guide in assessing if products were made with EE type ingredients or re-esterified contaminated materials. The results of the FT-IR analysis showed significant difference in the C=O, C-O band positions in TG and EE. There were 19 TG type products and 19 EE type products. The analysis of carbon isotope ratio was performed on the types of TG and EE. There were different properties in the 19 TG type products. In one product, the carbon isotope ratio was -25.15 and the other 18 products showed -22.15~-23.96. The carbon isotope ratio of all 19 EE type products showed -21.91~-23.74. The results of the TLC analysis showed similar results with FR-IR. The re-esterified TG form was not detected in the TG type products, confirming that the TG type products contained natural salmon oil. This study aimed to provide the basic material in classifying the types of natural salmon oil and re-esterified salmon oil, by analyzing the pattern and proportion of FT-IR spectrum, carbon isotope ratio, and TLC.

• The Journal of Advanced Prosthodontics
• /
• 제5권3호
• /
• pp.241-247
• /
• 2013

PURPOSE. To evaluate the effect of various metal oxides on impact strength (IS), fracture toughness (FT), water sorption (WSP) and solubility (WSL) of heat-cured acrylic resin. MATERIALS AND METHODS. Fifty acrylic resin specimens were fabricated for each test and divided into five groups. Group 1 was the control group and Group 2, 3, 4 and 5 (test groups) included a mixture of 1% $TiO_2$ and 1% $ZrO_2$, 2% $Al_2O_3$, 2% $TiO_2$, and 2% $ZrO_2$ by volume, respectively. Rectangular unnotched specimens ($50mm{\times}6.0mm{\times}4.0mm$) were fabricated and drop-tower impact testing machine was used to determine IS. For FT, compact test specimens were fabricated and tests were done with a universal testing machine with a cross-head speed of 5 mm/min. For WSP and WSL, disc-shaped specimens were fabricated and tests were performed in accordance to ISO 1567. ANOVA and Kruskal-Wallis tests were used for statistical analyses. RESULTS. IS and FT values were significantly higher and WSP and WSL values were significantly lower in test groups than in control group (P<.05). Group 5 had significantly higher IS and FT values and significantly lower WSP values than other groups (P<.05) and provided 40% and 30% increase in IS and FT, respectively, compared to control group. Significantly lower WSL values were detected for Group 2 and 5 (P<.05). CONCLUSION. Modification of heat-cured acrylic resin with metal oxides, especially with $ZrO_2$, may be useful in preventing denture fractures and undesirable physical changes resulting from oral fluids clinically.

• Journal of Plant Biotechnology
• /
• 제33권4호
• /
• pp.277-281
• /
• 2006

Fourier transform - infrared spectroscopy (FT-IR) provides biochemical profiles containing overlapping signals from a majority of the compounds that are present when whole cell extracts are analyzed. We attempted to determine the ripeness of strawberry fruit flesh by FT-IR. Fruit ripeness was divided into four developmental stages based on fruit skin color: 'yellow-green', 'pink-green', 'pink', and 'red' stages. Principal component analysis of FT-IR data of inside fruit flesh extracts clustered samples of four different developmental stages into three discrete groups: (1) 'yellow-green' group, (2) 'pink-green' group, and (3) 'pink' and 'red' group. The most remarkable difference between four different developmental stages was found in the carbohydrate fingerprint region $(1,000-1,100cm^{-1})$ of the FT-IR spectrum, indicating that differences in carbohydrate compounds represented the ripeness of strawberry fruit. Overall results indicate that FT-IR in combination with PCA enables discrimination of the ripeness of strawberry fruit flesh.

• 여성건강간호학회지
• /
• 제27권4호
• /
• pp.318-325
• /
• 2021

Purpose: Although insulin is usually injected into the abdominal subcutaneous fat, in pregnancy women tend to avoid abdominal injections due to concern about fetal damage. Prior studies have been limited to only measuring skin-subcutaneous fat thickness (S-ScFT) at one site at specific pregnancy points. This study aimed to measure S-ScFT across several abdominal sites and over the gestational period in Korean pregnant women. This can identify which site would be relatively safe for subcutaneous injection during pregnancy. Methods: Healthy women over 24 weeks of pregnancy in Korea were invited to voluntarily participate in this descriptive study. For the 142 women, S-ScFT of 12 sites in the abdomen were measured by ultrasound, several times over the pregnancy. Each incidence was treated as a case and a total of 262 cases were analyzed. Results: The mean S-ScFT during pregnancy was 1.14±0.47 cm (1.25±0.54 cm at 24⁺⁰-27⁺⁶ weeks; 1.17±0.48 cm at 28⁺⁰-31⁺⁶ weeks; 1.09+0.40 cm at 32⁺⁰-35⁺⁶ weeks; and 1.06±0.47 cm at 36⁺⁰-40 weeks of pregnancy). Most S-ScFT were thicker than 10 mm. But S-ScFTs in the lateral abdomen and some sites were suboptimal (<6 mm), especially in the pre-pregnancy underweight body mass index group, who had a high rate of suboptimal thickness (27.1% overall and 33.9% in the lateral side). Conclusion: The whole abdomen seems to be appropriate for subcutaneous injection in most Korean women during pregnancy, with a 4 to 5-mm short needle. However, for the lateral abdomen, making the skin fold might be needed for fetal safety.

• 대한소아치과학회지
• /
• 제28권1호
• /
• pp.16-24
• /
• 2001

레이저 형광법을 이용하여 각 개인의 우식의 활성도를 측정할 수 있는지를 규명하기 위해 $7\sim9$세의 아동 50명을 대상으로 치아의 순면과 협면에 아르곤 레이저를 조사하고 특수 필터를 사용하여 초기 치아우식증이 관찰되는 치아의 수를 측정하고, 이와 같은 초기 치아우식증의 수를 측정하는 우식활성법과 기존의 우식 활성도 측정 방법인 dDfFtT rate, Streptococcus mutans colony count와 상관성을 비교, 평가하고, 레이저 형광법을 이용한 우식활성검사의 특이도, 민감도, 진단력을 평가한 결과, 다음과 같은 결론을 얻었다. 1. 아르곤 레이저 형광법을 이용한 우식활성도 측정법은 기존의 Streptococcus mutans colony count 검사법과 비교적 높은 상관관계를 보였다($\gamma=0.48$, P<0.01). 2. 아르곤 레이저 형광법을 이용한 우식활성도 측정법은 dDfFtT rate 검사와 상관관계가 있었다($\gamma=0.39$, P<0.01). 3. Streptococcus mutans colony count와 dDfFtT rate와는 낮은 상관관계가 있었다($\gamma=0.27$, P<0.05). 4. dDfFtT rate를 기준검사 방법으로 하였을 때, 레이저 형광법을 이용한 우식활성 검사법은 특이도 44.4%, 민감도 85.7%, 진단력이 87.8%였다. 5. dDfFtT rate를 기준검사방법으로 하였을 때, Streptococcus mutans colony count는 특이도 77.8%, 민감도 92.9%, 진단력이 84.8%였다. 6. Streptococcus mutans colony count 검사법을 기준검사 방법으로 하였을 때 레이저 형광법을 이용한 우식활성 검사법은 특이도 40.0%, 민감도 84.8%, 진단력이 95.1%였다. 이를 종합해 볼 때 레이저 형광법을 이용하여 관찰한 우식활성 검사법은 기존의 우식활성검사 및 구강환경 검사와 비교적 높은 상관관계, 우수한 진단학적 지표를 보여 주므로써 향후 임상적으로 신뢰도와 타당성이 높은 우식활성 검사법으로서 그 활용 가능성이 높을 것으로 사료된다.

• Journal of Acupuncture Research
• /
• 제28권3호
• /
• pp.131-142
• /
• 2011

Objectives : The primary purpose of this study was to examine the effect of manual acupuncture at the $LI_4$, $ST_{36}$ and $LR_3$ on normal human EEG (Electroencephalogram). And the secondary purpose of this study was to analyze the relationships between the change of EEG wave form using correlation analysis. Methods : 32 channel EEG measurement was carried out in 25 healthy participants (23 males and 2 females). EEG was measured for 21 minutes including 15 minutes of retention time. In this study, power spectrum was used as a measure of complexity. Statistical analysis was performed using Spearman correlation. Results : The results were as follows; 1. In C4, O1, Fz, Pz, Cz, FCz, CP4, FC4, TP7, FT7 among 32 electrodes, ${\delta}$, $\theta$ and ${\beta}$ wave increased during 0-3 time intervals, and especially in case of TP7, FT7 ${\alpha}$ wave spontaneously decreased during 12~15 time intervals in manipulation group. 2. Between $\theta$ and ${\beta}$ wave and $\theta$ and ${\delta}$ wave, there was statistically significant positive correlation in C4, O1, Fz, Pz, Cz, FCz, CP4, FC4, TP7, FT7 according to Spearman correlation analysis. 3. Between ${\alpha}$ and ${\beta}$ wave, there was statistically significant positive correlation in TP7, FT7 according to Spearman correlation analysis. Conclusions : These results suggest that TP7 and FT7 could be typical electrodes representing change of EEG after manipulated acupuncture at the $LI_4$, $ST_{36}$ and $LR_3$. The relationships between the change of EEG wave form appear to have statistically significant positive correlation between $\theta$ and ${\beta}$ wave, $\theta$ and ${\delta}$ wave and ${\alpha}$ and ${\beta}$ wave.

• Elastomers and Composites
• /
• 제52권4호
• /
• pp.266-271
• /
• 2017

This study describes the influence of the amount of curing agent and curing temperature on the kinetics of polyurethane elastomers. The urethane prepolymer series was prepared by reacting toluene diisocyanate with polytetramethylene ether glycol at $80^{\circ}C$ for 1 h, and 4,4'-methylene bis(2-chloroaniline) was used as the curing agent. The ratio of the amine group of the curing agent to the isocyanate group of the urethane prepolymer was controlled from 0.85 to 1.05 at curing temperatures ranging from 80 to $120^{\circ}C$. The curing rate of the urethane prepolymer was monitored by observing the change in heat flow during the curing process using differential scanning calorimetry (DSC). As either the content of curing agent or the curing temperature was higher, the conversion rate to the polyurethane elastomer was high. The DSC results were compared with those obtained from using real-time FT-IR.

• 한국안광학회지
• /
• 제8권1호
• /
• pp.17-22
• /
• 2003

$PbO-Bi_2O_3-B_2O_3-SiO_2$ 유리계의 DTA 곡선과 FT-IR 스펙트럼을 조사하였다. 유리전이 온도의 조성비 의존성은 60 mol% $Bi_2O_3$에서 유리계의 구조가 변화하는 것으로 나타났다. 높은 비스무스 함량을 가지는 시료의 FT-IR 스펙트럼 조사에서 무거운 양이온 $Bi^{3+}$의 단위구조와 관계되는 결합이 우세했으며 그리고 고함량의 $Bi_2O_3$ 시료에서도 역시 붕소원자의 3배위와 4배위 진동이 있었다. PbO함량이 높은 유리계의 경우, 비가교 산소밴드의 낮은 강도는 PbO의 망목형성제 역할에 기인 한 것으로 생각된다. 유리의 흡수대는 결정화상태에서 강도가 매우 큰 변화를 보였다.