• 상하수도학회지
• /
• 제26권1호
• /
• pp.149-157
• /
• 2012

Experiments for As(V) removal using synthesized $Ca{\cdot}Al$-monosulfate was performed from the water contaminated with arsenate. Monosulfate is known as LDHs (Layered Double Hydroxides) which is one of the anionic clay minerals. Monosulfate was synthesized mixing $C_3A$ (tricalcium aluminate), gypsum (calcium sulfate), and water with an intercalation method. The product form the synthesis was characterized by FE-SEM, WDXRF, PXRD, and FT-IR. Experiments with different doses of monosulfate were carried out for kinetic. As a result of experiment, the concentration of As(V) was reduced from 0.67 mM to 0.19 mM (0.67mM of monosulfate) and 0.178 mM (1.34 mM of monosulfate). The concentration of sulfate was increased with As(V) decrease. The result of PXRD showed that the d-spacing of inter layer ($d_{003}$ peak) was shifted from 8.927 ${\AA}$ to 8.095 ${\AA}$ because the sulfate in the inter layer of monosulfate was exchanged arsenate with water molecules bonded. From the FT-IR results, a new single band (800 cm-1) was observed after the reaction of monosulfate and As(V). The arsenic removal can be regarded as anion exchange mechanism that is one of the characteristics of LDHs from the results of PXRD and FT-IR analysis.

• 대기
• /
• 제19권4호
• /
• pp.319-329
• /
• 2009

The intensive dust observation experiment has been performed at Korea Global Atmosphere Watch Center (KGAW) in Anmyeon, Korea during each spring season from 2007 to 2009. Downward and upward hyper-spectral spectrums over the dust condition were measured to understand the hyper-spectral properties of Asian dust using both ground-based Fourier Transform Infrared Spectroscopy (FT-IR) and space-borne AIRS/Aqua. To understand the impact of the Asian dust, a Line-by-Line radiative transfer model runs to calculate the high resolution infrared spectrum over the wave number range of $500-500cm^{-1}$. Furthermore, the radiosonde, a $PM_{10}$ Sampler, a Micro Pulse Lidar (MPL), and an Aerodynamic Particle Sizer (APS) are used to understand the vertical profile of temperature and humidity and the properties of Asian dust like concentration, altitude of dust layer, and size distribution. In this study, we found the Asian dust distributed from surface up to 3-4 km and volume concentration is increased at the size range between 2 and $8{\mu}m$ The observed dust spectrums are larger than the calculated clear sky spectrums by 15~60K for downward and lower by around 2~6K for upward in the wave number range of $800-1200cm^{-1}$. For the characteristics of the spectrum during the Asian dust, the downward spectrum is revealed a positive slope for $800-1000cm^{-1}$ region and negative slope over $1100-1200cm^{-1}$ region. In the upward spectrum, slopes are opposed to the downward one. It is inferred that the difference between measured and calculated spectrum is mostly due to the contribution of emission and/or absorption of the dust particles by the aerosol amount, size distribution, altitude, and composition.

• 한국화재소방학회논문지
• /
• 제25권4호
• /
• pp.35-41
• /
• 2011

연기독성생성물로 인한 인명피해가 주요한 화재피해로 보고되고 있다. 화재로 인한 연기독성을 평가하기 위해 국내외의 다양한 시험이 있으며, 국내에서는 KS F 2271의 가스유해성시험으로 건축마감재료의 유해성을 평가하고 있다. 현행 가스유해성시험은 발연가스를 설치류(실험용 흰 쥐)에 노출시켜 행동시간을 측정하여 연소가스 독성을 평가한다. 본 연구에서는 가연성 고분자소재(우레탄 및 고무바닥재)를 대상으로 가스유해성시험을 수행하고 이때 발생되는 가스를 FT-IR로 정량분석하였다. 정량분석결과는 BS6853에서 규정하는 기준값과 비교하여 독성지수(R)를 산정하였다. 동물시험과 독성지수의 상대적 비교를 통해 두 시험법의 상관성을 분석하여 다양한 독성평가를 시도하고자 하였다.

• 한국구조물진단유지관리공학회 논문집
• /
• 제16권3호
• /
• pp.1-10
• /
• 2012

FRP 재료는 높은 부식저항성과 강도에도 불구하고 지난 20여년 동안 심각한 환경적 노출에 의한 재료의 성능저하에 대한 문제가 제기되어 왔다. 본 연구에서는 섬유와 수지로 구성된 이질재료인 FRP보강근이 온도와 화학적 노출을 복합적으로 받는 경우에 대하여 실험적으로 분석하였다. 각기 다른 형상으로 제작된 탄소, 유리 및 하이브리드 FRP 보강근 5종류에 대하여 중량변화, 계면전단강도(ILSS), SEM 및 FT-IR분석을 수행하였으며, 모든 FRP 실험편은 최대 150일까지 알칼리 용액과 증류수에 침지시킨 다음 60, 100, 150 및 300도의 온도에서 30분동안 노출하였다. 실험결과, 또한 FRP 보강근의 성능저하는 섬유의 종류뿐 아니라 수지의 종류와 제조과정에 따라 영향을 받는 것으로 관찰되었다. 침지 초기에는 ILSS 강도가 약간 증가한 후 시간경과에 따라 강도가 감소하는 것으로 나타났다. 알칼리 용액과 증류수 용액에 의해 손상을 받은 ILSS의 차이는 무시할 수 있는 수준인 것으로 관찰되었다.

• 접착 및 계면
• /
• 제7권2호
• /
• pp.26-31
• /
• 2006

Jute와 PP의 계면 접착력을 향상시키기 위해 추가적인 단계 없이 친 환경적인 공정을 통해 MAPP를 적용하였고 자연섬유의 방향성 또한 부여하여 기존에 제안된 방법보다 우수한 기계적 물성을 나타내었다. 전단 속도를 일정하게 변화시켜 기지 수지의 용융점도 측정한 결과, 압출이나 사출 성형과 같이 높은 전단력이 작용하지 않는 고온 프레스에서도 MAPP를 증량함에 따라 섬유와의 결합 가능성을 높일 수 있음을 밝혔다. 더하여 MAPP와 jute 섬유의 계면에서 관능기 간 화학 결합이 생성됨을 FT-IR을 통해 확인하였다. 인장 강도의 경우 섬유 방향에서 높은 값을 보였으며 3 wt% MAPP 함량에서 최적화 되었고 인장 강성에서도 유사한 경향을 가졌다. 굴곡 강도는 인장에 비해 상대적으로 MAPP 함량에 따른 상승효과가 미비하였는데 함침의 영향으로 판단되었다.

• 한국재료학회지
• /
• 제19권12호
• /
• pp.657-660
• /
• 2009

Optical characteristics and structural changes depending on CuO content in phosphate glasses that are used in near-infrared (near-IR) filters were investigated. With phosphate glasses that contain 1-9 mol% CuO, changes in optical transmittance, optical absorption, and color coordinate were measured with a UV-VIS spectrophotometer. An XPS (X-ray photoelectron spectroscopy) analysis was performed to determine valence of copper ion that influences optical characteristics in near-IR filter glasses. Structural changes in glasses depending on CuO content were also analyzed by FT-IR (Fourier transform infrared) and Raman spectrophotometers. From the UV-VIS spectrophotometer results, strong absorption peaks at 220 & 900 nm were found and transmittance was decreased. The color coordinates of the glasses were shifted to the green color direction with CuO addition for increasing absorption of long wavelength range spectra, in spite of the amount of $Cu^{2+}$, which gives a blue color to glasses, and which was increased in XPS results. Also, structural de-polymerization of glasses with CuO addition were found by FT-IR and Raman results.

• 한국염색가공학회지
• /
• 제27권1호
• /
• pp.11-17
• /
• 2015

Recently, super fiber reinforced composite materials are widely used in many industries due to high mechanical properties. In this study, 2 different types of composite materials were manufactured in order to compare their mechanical properties. Carbon and Aramid fibers were used for reinforcement materials and Bisphenol-A type epoxy resin was for matrix. Two kinds of fiber-reinforced materials were manufactured by RIM(Resin Injection Molding) method. Before manufacturing composite materials, the optimal manufacturing and curing process condition were established and the ratio of reinforcement to epoxy resin was discussed. FT-IR analysis was conducted to clarify the structure of epoxy resin. Thermal and mechanical property test were also carried out. The cross-section of composite materials was observed using a scanning electron microscope(SEM).

• 한국의류학회지
• /
• 제37권7호
• /
• pp.852-863
• /
• 2013

We investigate the immobilization of trypsin on chitosan nonwoven using glutaraldehyde (GA). The conditions for trypsin on chitosan nonwoven and GA cross-linking were optimized depending on different conditions. The order of GA cross-linking was determined by the activity of immobilized trypsin. The characteristics of chitosan nonwoven were examined by Fourier-transform infrared (FT-IR) and surface morphology analyses (SEM). Results showed that the optimal treatment conditions for trypsin on chitosan nonwoven were as follows: pH 8.5; temperature $37^{\circ}C$; trypsin concentration 15% (o.w.f); and treatment time 60 min. Those for GA cross-linking were: pH 10.0; GA concentration 3% (v/v); and treatment time 120 min. FT-IR analysis showed that GA was cross-linked on chitosan nonwoven. The SEM analysis also showed that trypsin was immobilized on chitosan nonwoven.

• 분석과학
• /
• 제13권3호
• /
• pp.282-290
• /
• 2000

본 연구는 390nm 이하에서 자외선 흡수가 완벽한 폴리카보네이트(광학용)에 첨가된 각종 첨가제를 아세톤으로 추출하거나 용해-침전 방식으로 분리하여 분석하는 것이다. 분리된 첨가제를 정성적으로 분석하기 위해 자외선흡광광도계, FT-IR 및 HPLC로 분석하였다. 분리된 물질은 광안정제 및 산화방지제(1차 및 2차)등의 첨가제와 단량체 및 올리고머가 함유된 복잡한 혼합물로 추정할 수 있다. 분리된 첨가물을 Bondapak $C_{18}$ 칼럼, 메탄올 이동상, PDA (Photodiode Array) 검출기를 사용한 역상(reversed phase, RP) HPLC 분석을 통해 비스페놀 A, Irganox 1010, Cyasorb UV-5411 성분들을 확인할 수 있있다. 또한, 자외선 흡광도를 이용한 정량분석을 통해 폴리카보네이트에 광안정제인 Cyasorb UV-5411가 0.12중량% 함유된 것을 알 수 있었다.

• Asian Pacific Journal of Cancer Prevention
• /
• 제15권10호
• /
• pp.4311-4317
• /
• 2014

Background: Nano-biotechnology is recognized as offering revolutionary changes in the field of cancer therapy and biologically synthesized gold nanoparticles are known to have a wide range of medical applications. Materials and Methods: Gold nanoparticles (GNPs) were biosynthesized with an aqueous extract of the red alga Corallina officinalis, used as a reducing and stabilizing agent. GNPs were characterized using UV-Vis spectroscopy, transmission electron microscopy (TEM), energy dispersive analysis (EDX) and Fourier transform infra-red (FT-IR) spectroscopy and tested for cytotoxic activity against human breast cancer (MCF-7) cells cultured in Dulbecco's modified Eagle medium supplemented with 10% fetal bovine serum, considering their cytotoxicty and effects on cellular DNA. Results: The biosynthesized GNPs were $14.6{\pm}1nm$ in diameter. FT-IR analysis showed that the hydroxyl functional group from polyphenols and carbonyl group from proteins could assist in formation and stabilization. The GNPs showed potent cytotoxic activity against MCF-7 cells, causing necrosis at high concentrations while lower concentrations were without effect as indicated by DNA fragmentation assay. Conclusions: The antitumor activity of the biosynthesized GNPs from the red alga Corallina officinalis against human breast cancer cells may be due to the cytotoxic effects of the gold nanoparticles and the polyphenolcontent of the algal extract.