• Journal of the Optical Society of Korea
• /
• v.20 no.3
• /
• pp.368-380
• /
• 2016

There is no doubt that adaptive optics (AO) is the most promising method to compensate wavefront disturbance in free space optics communication (FSO). In order to improve the performance of the AO system described by discrete-time linear system model with time-delay and implicit phase turbulent model, new controllers based on a Kalman filter and its extensions are proposed. Based on the standard Kalman filter, we propose a fading memory filter to deal with the ruleless strong interference; sequential and U-D filters are applied to reduce implementation complexity for the embedded controllers. Theoretical analysis and the numerical simulations show that the proposed fading memory filter can upgrade the performance for AO systems in consideration of the unforeseen strong pulse interference, and the sequential and U-D filters perform well compared with a Kalman filter.

• Electronics and Telecommunications Trends
• /
• v.17 no.6 s.78
• /
• pp.39-47
• /
• 2002

지금까지 last-mile 구간의 병목 현상을 해결하기 위해 다양한 매체와 기술들이 선보였으나, 어떠한 솔루션도 통신 사업자들의 요구 조건을 완벽하게 충족시키지 못하고 있다. 광 섬유가 가장 이상적인 대안으로 평가 받고 있지만 여전히 높은 가격과 긴 구축 시간으로 인해 주로 메트로 코어에 집중적으로 설치되어 있는 상태이며, 액세스 및 에지 구간까지 확대되려면 앞으로 상당한 시간이 소요될 것으로 예상되고 있다. 따라서 FTTx 환경이 마련되기 전까지 한시적인 대안으로서 현재까지 LMDS/MMDS와 같은 RF 솔루션, xDSL 및 케이블 모뎀과 같은 동선 기반 광대역 액세스 솔루션들이 제안되었으나, 이들 기술들도 적절한 가격에 충분한 대역폭을 제공해야 하는 last-mile의 요구 조건을 만족시키지는 못하고 있다. 이에 본 고에서는 최근 또 다른 기업용 last-mile 솔루션으로 새롭게 부각되고 있는 자유 공간 광 통신(FSO)의 성장 가능성과 발전 전망을 탐색해 보고자 한다.

• Transactions of the Korean Society of Machine Tool Engineers
• /
• v.14 no.6
• /
• pp.37-44
• /
• 2005

This paper presents fabrication techniques of the optical fiber position sensor (or spindle state monitoring. These include selection of components such as optical fibers, a laser-diode, a photo-diode, and op-amp IC of the signal process circuit. We also describe electric runout problem. The fabricated sensor has a linearity of $1.7\%$ FSO in the air gap range $0.1\~0.6mm$, a resolution of $0.37{\mu}m$ and a bandwidth of 6.3kHz. Finally, we have successfully operated a magnetic bearing spindle system using the sensors.

• Current Optics and Photonics
• /
• v.8 no.3
• /
• pp.239-245
• /
• 2024

This paper proposes single logarithmic amplification (single-LA) and deep learning (DL)-based fixed-threshold on-off keying (OOK) detection for free-space optical (FSO) communication. Multilevel LAs (MLAs) can be used to mitigate intensity fluctuations in the received OOK signal by their nonlinear gain characteristics; however, it is ineffective in the case of high scintillation, owing to degradation of the OOK signal's extinction ratio. Therefore, a DL technique is applied to realize effective scintillation compensation in single-LA applications. Fully connected (FC) networks and fully connected neural networks (FCNN), which have nonlinear modeling characteristics, are deployed in this work. The performance of the proposed method is evaluated through simulations under various scintillation effects. Simulation results show that the proposed method outperforms the conventional adaptive-threshold-decision, single-LA-based, MLA-based, FC-based, and FCNN-based OOK detection techniques.

• 제어로봇시스템학회:학술대회논문집
• /
• 2003.10a
• /
• pp.2187-2191
• /
• 2003

In this paper, a x/y-axis accelerometer is fabricated, using the SBM process on a <111> SOI wafer. This fabrication method solves the problem of the footing phenomenon in the conventional SOI process for improved manufacturability and performance. The roughened lower parts as well as the loose silicon fragments due to the footing phenomenon are removed by the alkaline lateral etching step of the SBM process. The fabricated accelerometer has a demodulated signal-to-noise ratio of 92 dB, when 40Hz, 5 g input acceleration is applied. The noise equivalent input acceleration resolution and bandwidth are $125.59\;{\mu}g$ and over 100 Hz, respectively. The acceleration random walk is $12.5\;{\mu}g/\sqrt{Hz}$. The output linearity is measured to be 1.2 % FSO(Full Scale Output) at 40 Hz, and the input range is over ${\pm}\;10g$.

• Journal of Sensor Science and Technology
• /
• v.26 no.1
• /
• pp.60-65
• /
• 2017

This paper describes the low noise and low power IC using the opamp sharing technique for the capacitive micro-sensor sensing platform. The proposed IC reduces noise using correlated double sampling (CDS) and reduces power consumption using the opamp sharing technique. The IC is designed to be fully programmable, and can be digitally controlled by serial peripheral interface (SPI). The power consumption and the integrated input referred noise are 1.02 mW from a 3.3 V supply voltage and $0.164aF_{RMS}$ with a bandwidth of 400 Hz. The capacitive sensitivity, the input-output linearity and the figure of merits (FoM) are 2.5 mV/fF, 2.46 %FSO, and 8.4, respectively.

• Proceedings of the KIEE Conference
• /
• 2004.11c
• /
• pp.726-728
• /
• 2004

In this paper, the gain of the observer is properly set up using the fuzzy control and Fuzzy-Sliding observer(FSQ) that have a superior transient characteristic and is easy to implement compared to the existing method is designed. It estimate the differentiation of the armature current directly using the armature current measured in the AC motor. It estimate the speed of the rotor using the differentiation. It is proposed speed sensorless control method using the estimated speed. Optimal gain of speed observer(Luenberger observer) was set up using the fuzzy control and adapted speed control of AC servo motor. To verify the performance of designed Fuzzy-Sliding observer, simulation compared with fixed speed observer gain of G.B Wang and S.S Peng's sliding observer is performed. Also, it was proved the excellence and feasibility of the proposed observer from the comparison test with a speed sensor and without a speed sensor which used a highly efficient drive and 400W AC servo motor starting system.

• International journal of advanced smart convergence
• /
• v.1 no.1
• /
• pp.19-26
• /
• 2012

The deployment of mobile femtocellular networks can enhance the service quality for the users inside the vehicles. The deployment of mobile femtocells generates a lot of handover calls. Also, numbers of group handover scenarios are found in mobile femtocellular network deployment. The ability to seamlessly switch between the femtocells and the macrocell networks is a key concern for femtocell network deployment. However, until now there is no effective and complete handover scheme for the mobile femtocell network deployment. Also handover between the backhaul networks is a major concern for the mobile femtocellular network deployment. In this paper, we propose handover control between the access networks for the individual handover cases. Call flows for the handover between the backhaul networks of the macrocell-to-macrocell case are proposed in this paper. We also propose the link switching for the FSO based backhaul networks. The proposed resource allocation scheme ensures the negligible handover call dropping probability as well as higher bandwidth utilization.

• Journal of Sensor Science and Technology
• /
• v.14 no.4
• /
• pp.237-243
• /
• 2005

Strain gauge type load cell is used widely as weight sensor. However, it has problems such as noise, power consumption, high cost and big size. Semiconductor type piezoresistive pressure sensor is practically used in recent for low hysteresis, good linearity, small size, light weight and strong on vibration. In this paper, we have fabricated the piezoresistive pressure sensor and packaged the miniature weight sensor. We packaged the miniature weight sensor by flip-chip bonding between die and PCB for durability, because the weight sensor is directly contacted on a physical solid distinct from air and oil pressure. We measured the characteristics of the weight sensor, which had the output of $10{\sim}80$ mV on the weight range of $0{\sim}2$ kg. In the result, we could fabricate the weight sensor with an accuracy of 3 %FSO linearity.

• Bulletin of the Korean Chemical Society
• /
• v.10 no.6
• /
• pp.591-595
• /
• 1989

The$^{13}C$ NMR shifts of a series of para-substituted 9-aryl-tricyclo$[3.3.1.0^{2,8}]$non-9-yl and 8-aryl-tetracyclo$[3.2.1.0^{2,7}.0^{4,6}]$-oct-8-yl cations were measured in $FSO_3H/SO_2ClF \;at\; -90^{\circ}C\; or\; -70^{\circ}C$ in order to examine whether the ${\rho}^{c+}$ values can be used to explain the mechanism for the stabilization of the geometrically rigid cyclopropylcarbinyl cations. Plots of the ${\Delta}{\delta}^{c+}$ shifts against ${\sigma}^{c+}$ reveal excellent linear correlation. The tricyclononyl systems yield a ${\rho}^{c+}$ value of -4.95 with a correlation coefficient r = 0.9948. The tetracyclo-octanyl systems give a ${\rho}^{c+}$ value of -6.39 with r = 0.9943. A fair parallelism exists between the results of $^{19}F$ nmr studies and the change of ${\rho}^{c+}$ values in these cations. Accordingly, the present study established that the ${\rho}^{c+}$ value can be used as a mearsure of the geometric influence for the charge delocalization in cyclopropylcarbinyl cations.