• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.27 no.4B
• /
• pp.324-330
• /
• 2002

In this paper, we proposed a simple modification on Fiebig's REC algorithm for multiuser detection of FH/MFSK systems replacing hard limiter with soft limiter. The performance improvement of our modified REC algorithm has been confirmed with computer simulations. for the parameter of interest, the capacity could be increased about 5% or more without degrading the reliability.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 1999.05a
• /
• pp.39-42
• /
• 1999

Adaptive array is using the array of antenna elements spatially and its output is the sum of each antenna elements output signal which is multiplied by the controlled weight coefficients corresponding to each elements. In this paper, for the BPSK and BFSK signals with S/I=2, S/N=10 is applied to the linear array antenna using the LMS & the Kalman filter algorithm. For the 4 elements equidistance linear array antenna system LMS and Kalman filter algorithm was used as the adaptive instruction principles and the application results to the constant amplitude envelope signals such as BPSK or BFSK can be seen that the computer simulation results are very fast in the convergence characteristics of directional patterns and the signal following characteristics.

• Journal of Industrial Technology
• /
• v.19
• /
• pp.81-89
• /
• 1999

We have developed a power line simulator which is one of the basic tools for the research of the power line communication and its control system. In the developed simulators, we have considered the transfer function of the power line, noises and signal attenuation characteristics. Simulator was made using the matlab tool program. We made the power line modern using the FSK chip(ST7537) and experimentalized to show the efficiency grade of simulator. We have expected that the developed simulators are very useful in the area for the power line communication research and the control system design.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2008.10a
• /
• pp.227-230
• /
• 2008

기존의 대표적인 디지털 통신방식으로 주파수 편이 변조(FSK: frequency shift keying), 위상 편이 변조(PSK: phase shift keying), 진폭 편이 변조(ASK: amplitude shift keying) 방식들이 있다. 본 논문에서는 디지털 통신에서 비트 전송률을 높이기 위하여 스케일링 함수(scaling function)와 웨이브릿(wavelet)을 이용한 2비트 스케일을 갖는 웨이브릿 편이 변조(WSK: wavelet shift keying)신호의 복원 알고리즘을 제안한다. 변조시 스케일링 함수(scaling function)와 웨이브릿(wavelet) 그리고 이 두 신호를 반전하여 2비트 스케일 즉, 00, 01, 10, 그리고 11로 변조하였다. 복조시에는 변조된 신호를 2개의 2진 정합필터에 통과시켰다. 그리고 정합필터를 거친 파형을 조합하여 4가지 신호를 복원하였다. 모의실험 결과 제안한 알고리즘이 기존의 웨이브릿 편이 변조 시스템에 비해 전송효율이 향상되었음을 알 수 있었다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.14 no.3
• /
• pp.227-234
• /
• 1989

In this paper, a new receiver for a frequency-hopped multilevel FSK system for mobile Communications is presented. This new receiver provides an implementation advantage by eliminating unecessary energy detection of all the frequency channels. A performace analysis of the proposed system is carried out by using the union bound. We show that an optimim number of message bits that minimize the word error probability exists for a given number of simultaneous users. This scheme is a generalization of the MFSK system that allows the message bits to be uaried, making it possible for designers to increase the flexibility of implementation. Error probabilities are calculated in the case of fixed bandwidth and fixed tone repetition number. The effect of using error-correcting coding is considered.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.11 no.10
• /
• pp.1852-1857
• /
• 2007

The SSB modem performs the modulation process which converts the digital voltage level to the audible frequency band signal and the demodulation process which converts reversely the audible frequency signal to the digital voltage level. The modulator and the demodulator are implemented with a single DSP chip. Because of the SSB specific character, the distortion occurs when the frequency is changed. This distortion has no effect on voice communication but it has an significant effect on data communication. In other words, it is impossible to send data stream with adjacent 2 periods. Therefore, in case of using 2-tone FSK, it is needed to send at least 3 periods to transmit 1 bit. Therefore we implemented the modem using modified phase-delay shift keying to transmit 1 tone signal for high speed transmission. In the 1200[bps] mode, it generates 0, $187{\mu}s$, delay time at 1.3kHz symbol frequency, and in the 2400[bps] mode, 0, $70{\mu}s\;130{\mu}s\;200{\mu}s$, delay time at 1.5kHz symbol frequency. Finally, in the maximum 3600[bps] mode, it generates 0, $100{\mu}s\;160{\mu}s\;250{\mu}s$ 2.0kHz symbol frequency. The measured results of the implemented SSB modem shows a good transfer functional characteristic by spectrum analyzer, almost same bandwidth in pass band and 20dB higher SNR comparing the emu FACTOR and American CLOVER and in the experimental transmitting test, we verified the transmitted data is received correctly in platform.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2007.10a
• /
• pp.693-697
• /
• 2007

The SSB modem performs the modulation process which converts the digital voltage level to the audible frequency band signal and the demodulation process which converts reversely the audible frequency signal to the digital voltage level. The modulator and the demodulator are implemented with a single DSP chip. Because of the SSB specific character, the distortion occurs when the frequency is changed. This distortion has no effect on voice communication, but it has an significant effect on data communication. In other words, it is impossible to send data stream with adjacent 2 periods. Therefore, in case of using 2-tone FSK, it is needed to send at least 3 periods to transmit 1 bit. Therefore we implemented the modem using modified phase-delay shift keying to transmit 1 tone signal for high speed transmission. In the 1200[bps] mode, it generates 0, $187{\mu}s$ delay time at 1.3kHz symbol frequency, and in the 2400[bps] mode, 0, $70{\mu}s$, $130{\mu}s$, $200{\mu}s$ delay time at 1.5kHz symbol frequency. Finally, in the maximum 3600[bps] mode, it generates 0, $100{\mu}s$, $160{\mu}s$, $250{\mu}s$ delay time at 2.0kHz symbol frequency. The measured results of the implemented SSB modem shows a good transfer functional characteristic by spectrum analyzer, almost same bandwidth in pass band and 20dB higher SNR comparing the German PACTOR and American CLOVER and in the experimental transmitting test, we verified the transmitted data is received correctly in platform.

• Proceedings of the KIEE Conference
• /
• 1989.07a
• /
• pp.707-711
• /
• 1989

This system exchange half-duplex serial data at 1200 baud by FSK modulating a carrier frequency at 200KHz over the 110V A.C. power line. Transmitter output voltage to A.C. line is 4V p-p and line sensitivity is selected 2.54mV because CISPR Noise limitation is $66dB{\mu}V$ at 150 ${\sim}$ 500KHz. The designed and realized system has abtained system margin of 58 dB and probability of error, Pe = $1.78{\times}10^{-7}$ was obtained

• Journal of Industrial Technology
• /
• v.29 no.B
• /
• pp.193-198
• /
• 2009

In this paper, we developed remote dimming control system of electronic ballast for 400W metal halide lamp. This ballast could limit ignition current and soft start-up technique by the inverter with LCsCp resonance tank. The dimming circuit can dim from 400W to 200W by varying of the inverter switching frequency. The PLM consists of coupling circuit, BPF(Band-Pass Filter), FSK(Frequency Shift Keying) Modem and ${\mu}$-controller(Micro Controller). By coupling electronic ballast with PLM, the system that able to dimming the lamp through PLM is demonstrated by experimental results.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.685-688
• /
• 2002

This paper deals with new scheme of remote load control management system with communication from RCU to controller using power line Power line communication is useful for economical data link but various problems and limitations are caused in using power lines for communications channel. A power line is not so good in the commercial electrical power, and its load noise and high frequency noise are so much. To decrease these noise, we used the FSK(Frequency Shift Keying) modulation method. The experimental results show that the proposed system in this paper is compatible with the conventional system with low cost and the feasibility is very high for new or remodeling plant.