• 한국정밀공학회지
• /
• 제27권9호
• /
• pp.43-51
• /
• 2010

Speed, accuracy and smoothness are the important properties of pan-tilt camera. In the case of a high ratio zoom lens system, low vibration characteristic is a crucial point in driving pan-tilt mechanism. In this paper, a novel micro-stepping controller with a function of reducing vibration was designed using field programmable gate arrays (FPGA) technology for high zoom ratio pan-tilt camera. The proposed variable reference current (VRC) control scheme reduces vibration decently and optimizing coil current in order to prevent the step motor from occurring missing steps. By employing VRC control scheme, the vibration in low speed could be significantly minimized. The proposed controller can also make very high speed of 378kpps micro-step driving, and increase maximum acceleration in motion profiles.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2011년도 전력전자학술대회
• /
• pp.561-562
• /
• 2011

인 휠 모터를 이용하여 구동되는 전기차량은 각 모터의 동기 제어가 요구된다. 기존의 마이크로컨트롤러는 구동시킬 수 있는 모터의 개수가 제한되어 인 휠 모터를 이용하여 구동되는 전기차량과 같은 다축 제어 시스템에 적용하기가 어렵다. 따라서 본 논문에서는 FPGA(Field Programmable Gate Array)를 이용하여 4축 동기 SVPWM 기법을 구현하였으며, 시뮬레이션을 통하여 성능을 확인하였다.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2013년도 춘계학술발표대회
• /
• pp.501-503
• /
• 2013

This project presents a concept of mobile robots using prototypes, computing proposal oriented to embedded systems implementation. We implement our system using GPS module, Ultrasonic sensor(range sensors), H-bridge dual stepper control, DTMF(Dual-tone Multi-Frequency ) and LCD module. In this paper we construct a mechanical simple mobile robot model, which can measure the distance from obstacle with the aid of sensor and should able to control the speed of motor accordingly. Modules were interfaced with FPGA(Field Programmable Gate Array) controller for hardware implementation.

• 한국지능시스템학회논문지
• /
• 제24권4호
• /
• pp.412-417
• /
• 2014

본 논문은 세 개의 바퀴로 구동되는 전방향 이동로봇의 제작과 제어에 대해 소개한다. 전방향성 움직임은 독립적인 회전과 병진운동을 통해 이루어진다. 전방향 이동로봇의 기구학과 동역학을 사용하여 장애물 회피에 대한 시뮬레이션도 수행하였다. 실제 로봇을 제어하기 위해 로봇을 제작하고 하드웨어를 구성하였으며, 제어 알고리즘은 DSP와 FPGA 칩에 구현하였다. 모터제어에 필요한 PWM, 엔코더 카운터, 통신 등과 같은 하드웨어는 FPGA에 구현하였다. 조이스틱을 통한 전방향 이동로봇을 제어함으로써 로봇의 동작성을 확인하였다.

• 항공우주시스템공학회지
• /
• 제11권1호
• /
• pp.41-46
• /
• 2017

소형 다중로터 드론의 동작 실험을 위하여 개발한 장치를 소개한다. 개발한 장치는, 볼 부슁 메카니즘, 이동형 지지대, 그리고 회전판을 적용하여 6자유도 운동이 가능하다. 병렬 처리가 가능한 FPGA기반의 제어기를 사용하여, 가속도와 자이로 센서로 부터 자세를 측정하고 모터 속도를 제어하였다. 다양한 동작을 수행하면서 실험 장치와 제어기의 동작성을 확인하였다. 결론적으로, 개발한 6자유도 실험 장치는 소형 드론 제어를 위한 제어기의 성능 검증을 위해 적합하다.

• 조명전기설비학회논문지
• /
• 제18권5호
• /
• pp.74-82
• /
• 2004

본 논문은 엘리베이터용 표면부착형 영구자석형 동기전동기의 속도제어를 기술하였다. 엘리베이터 전동기는 컴팩트하고 슬립형이 되어야 한다. 제안된 기법은 속도 및 토크제어를 위해 벡터제어 알고리즘을 사용하였으며, 속도제어기와 전류제어기에 windup 현상을 방지하기 위해 Anti-windup 기법을 적용하였다. 이 시스템은 컴팩트하고 저렴하게 설계하기 위하여 고속 32비트 DSP(TMS320C31-50), 고직접 논리소자 FPGA(EPF10K10TI144-3)로 수행되었다. 제안된 기법은 기계실 없는 엘리베이터용 3상 13.3[kW] 표면부착형 동기전동기로 시뮬레이션 및 실험을 통하여 결과를 확인하였다.

• Journal of Electrical Engineering and Technology
• /
• 제10권4호
• /
• pp.1540-1551
• /
• 2015

The detection of position and speed in BLDC motors without using position sensors has meant many efforts for the last decades. The aim of this paper is to develop a sensorless technique for detecting the position and speed of BLDC motors, and to overcome the drawbacks of position sensor-based methods by improving the performance of traditional approaches oriented to motor phase voltage sensing. The position and speed information is obtained by computing the derivative of the terminal phase voltages regarding to a virtual neutral point. For starting-up the motor and implementing the algorithms of the detection technique, a FPGA board with a real-time processor is used. Also, a versatile hardware has been developed for driving BLDC motors through pulse width modulation (PWM) signals. Delta and wye winding motors have been considered for evaluating the performance of the designed hardware and software, and tests with and without load are performed. Experimental results for validating the detection technique were attained in the range 5-1500 rpm and 5-150 rpm under no-load and full-load conditions, respectively. Specifically, speed and position square errors lower than 3 rpm and between 10º-30º were obtained without load. In addition, the speed and position errors after full-load tests were around 1 rpm and between 10º-15º, respectively. These results provide the evidence that the developed technique allows to detect the position and speed of BLDC motors with low accuracy errors at starting-up and over a wide speed range, and reduce the influence of noise in position sensing, which suggest that it can be satisfactorily used as a reliable alternative to position sensors in precision applications.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 추계학술대회 논문집 학회본부 B
• /
• pp.336-338
• /
• 2000

Recently many studies have been performed for variable speed control of induction motor. Direct Torque Control(DTC) is emerging technique for variable speed control of PWM inverter driven induction motor. DTC allows the direct control of stator flux and instantaneous torque through simple algorithm. In this paper ASIC design technique using VHDL is applied to DTC based speed control of induction motor. ASIC for DTC based speed control is designed through the description of coordinate transformation, speed controller stator flux and torque estimator, stator flux and torque controller, stator flux position detector. FSM(Finite State Machine) and inverter voltage switching vector. Finally the above system has been implemented on the FPGA (XC4052XL-PG411). Simulation and experiment has been performed to verify the performance of the designed ASTC.

• 한국자동차공학회논문집
• /
• 제23권1호
• /
• pp.25-33
• /
• 2015

This paper presents the d-q axis equivalent circuit model of an interior permanent magnet (IPM) which includes the iron loss resistance. The model is implemented to be able to run in real-time on the FPGA-based HIL simulator. Power electronic devices are removed from the motor control unit (MCU) and a separated controller is interfaced with the real-time simulated motor drive through a set of proper inputs and outputs. The inputs signals of the HIL simulation are the gate driver signals generated from the controller, and the outputs are the winding currents and resolver signals. This paper especially presents iron loss prediction which is introduced by means of comparing the torque calculated from d-q axis currents and the desired torque; and minimizing the torque difference. This prediction method has stable prediction algorithm to reduce torque difference at specific speed and load. Simulation results demonstrate the feasibility and effectiveness of the proposed methods.

• Journal of Power Electronics
• /
• 제16권2호
• /
• pp.553-563
• /
• 2016

This paper presents a digital hardware implementation of a real-time simulator for a multiphase drive using a field-programmable gate array (FPGA) device. The simulator was developed with a modular and hierarchical design using very high-speed integrated circuit hardware description language (VHDL). Hence, this simulator is flexible and portable. A state-space representation model suitable for FPGA implementations was proposed for a dual three-phase induction machine (DTPIM). The simulator also models a two-level 12-pulse insulated-gate bipolar transistor (IGBT)-based voltage-source converter (VSC), a pulse-width modulation scheme, and a measurement system. Real-time simulation outputs (stator currents and rotor speed) were validated under steady-state and transient conditions using as reference an experimental test bench based on a DTPIM with 15 kW-rated power. The accuracy of the proposed digital hardware implementation was evaluated according to the simulation and experimental results. Finally, statistical performance parameters were provided to analyze the efficiency of the proposed DTPIM hardware implementation method.