• Proceedings of the IEEK Conference
• /
• 1998.10a
• /
• pp.787-790
• /
• 1998

In this paper, we presents a method for multi-level logic mainmization which is suitable for the minimization of look-up table type FPGAs. A pattern extraction algorithm is minimized AND/XOR multi-level circuits. The circuits apply to Roth-Karp decomposition which is most commonly used technique in the FPGA technology mapping. We tested the FPGA synthesis method using pattern extraction on a set of benchmark. The proposed method achieved reductions on the number of LUTs in mapping soultion as compared with MISII(or SIS) or previous results〔5〕

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2003.05a
• /
• pp.51-54
• /
• 2003

진화하드웨어는 하드웨어 스스로 진화하여 필요한 회로를 구성한다 회로를 재구성하기 위해서 유전자 알고리즘을 사용한다. 유전자 알고리즘(Genetic Algorithm)은 전역적 탐색을 통하여 해를 구한다. 하지만 유전자 알고리즘은 많은 개체의 평가를 통하여 이루어지기 때문에 수행하는데 시간이 많이 소요된다. 이전의 연구에서 유전자 알고리즘 프로세서를 이용하여 진화하드웨어를 구성했다. 유전자 알고리즘 프로세서는 유연성이 떨어지고 범용적으로 사용하기 어렵다. 본 논문에서는 CPU를 이용하여 유전자 알고리즘 프로세서를 소프트웨어로 제어하는 방법을 제안한다 소프트웨어로 합성한 신호로 GAP의 동작을 제어하기 때문에 유연성을 가질 수 있다 FPGA에 CPU와 유전자 알고리즘 프로세서를 구현하여 one-chip 하드웨어를 구현한다.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2014.04a
• /
• pp.595-598
• /
• 2014

원전 디지털 계측제어시스템에서 공통원인고장(Common cause failure)의 발생 가능성이 증가함에 따라 이를 방지하기 위해 프로그래머블 논리소자(Field Programmable Gate Array)를 이용한 제어기가 개발되어 활용되고 있다. 그러나, FPGA-기반의 제어기를 구현하는데 사용되는 하드웨어 기술 언어는 그래픽 언어를 이용한 PLC 기반의 개발을 하던 대부분의 원전 계측제어 엔지니어에게 친숙하지 않아 제어기의 구현에 어려움이 있다. 따라서 엔지니어에게 친숙한 그래픽 언어를 이용하여 FPGA 용 제어 프로그램을 작성할 수 있는 통합개발환경이 필요하다. 본 논문에서 구현한 VerilogLinker 는 제어프로그램의 개발을 위한 통합개발환경의 일부로 통합개발환경을 이용한 제어 프로그램의 개발과정 중에서 생성된 Verilog 파일을 FPGA 공급자가 제공하는 상용 소프트웨어인 Libero SoC 와 연결하는 기능을 제공한다.

• Proceedings of the Korean Information Science Society Conference
• /
• 2011.06b
• /
• pp.416-419
• /
• 2011

본 논문에서는 XILINX의 합성 과정에서 생성되는 XDL 설계 데이터를 분석해서, 그로부터 verilog 네트리스트를 생성하는 소프트웨어의 개발에 관한 내용이다. 이 소프트웨어는 XILINX 용 P&R 소프트웨어, 논리 합성 소프트웨어의 개발, 또는 FPGA 상에서 특정 컴포넌트의 위치를 파악해냄으로써 FPGA 상에서 SEU 오류의 위치를 검출하는데 보조적으로 사용할 수 있다.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2003.05b
• /
• pp.69-73
• /
• 2003

음향압축에 있어서 인간의 청각신경의 특성을 이용하는 방식이 사용되고 있다. 이러한 방법은 심리음향모델(psychoacustical model)에서 도입되었다. 음향압축에서는 이러한 심리음향모델을 사용하여 인간이 지각할 수 없는 한도 내에서 부호화하지 않는 지각음향부호화(perceptual audio coding)사용한다. 지각음향부호화는 분석필터와 합성필터로 각각 부호화 복호화하는데 이것은 필터뱅크(filter bank)로 구현된 서브밴드코더(subband coder) 이다. 본 논문에서는 분석필터와 합성필터에 사용되는 MDCT(Modified Discrete Cosine Transform)와 IMDCT(Inverse Modified Discrete Cosine Transform)를 FPGA에 구현하였다.

• Journal of the Korean Institute of Telematics and Electronics C
• /
• v.35C no.11
• /
• pp.21-30
• /
• 1998

In this paper, a digital current control system using a FPGA(Field Programmable Gate Array) was implemented, and the system was applied to an induction motor widely used as an industrial driving machine. The FPGA designed by VHDL(VHSIC Hardware Description Language) consists of a PWM(Pulse Width Modulation) generation block, a PWM protection block, a speed measuring block, a watch dog timer block, an interrupt control block, a decoder logic block, a wait control block and digital input and output blocks respectively. Dedicated clock inputs on the FPGA were used for high-speed execution, and an up-down counter and a latch block were designed in parallel, in order that the triangle wave could be operated at 40 MHz clock. When triangle wave is compared with many registers respectively, gate delay occurs from excessive fan-outs. To reduce the delay, two triangle wave registers were implemented in parallel. Amplitude and frequency of the triangle wave, and dead time of PWM could be changed by software. This FPGA was synthesized by pASIC 2SpDE and Synplify-Lite synthesis tool of Quick Logic company. The final simulation for worst cases was successfully performed under a Verilog HDL simulation environment. And the FPGA programmed for an 84 pin PLCC package was applied to digital current control system for 3-phase induction motor. The digital current control system of the 3 phase induction motor was configured using the DSP(TMS320C31-40 MHz), FPGA, A/D converter and Hall CT etc., and experimental results showed the effectiveness of the digital current control system.

• Journal of Advanced Navigation Technology
• /
• v.15 no.2
• /
• pp.298-306
• /
• 2011

In this paper, the RUNCODE encoder hardware IP was designed and implemented for symbol ID code length encoding, which is one of major modules of JBIG2 encoder for FAX. ImpulseC Codeveloper and Xilinx ISE/EDK program are used for the hardware generation and synthesis of VHDL code. The synthesized hardware was downloaded to Virtex-4 FX60 FPGA on ML410 development board. The synthesized hardware utilizes 13% of total slice of FPGA. Using Active-HDL tool, the hardware was verified showing normal operation. Compared with the software operating using Microblaze cpu on ML410 board, the synthesized hardware was better in operation time. The improvement ratio of operation time between the synthesized hardware and software showed about 40 times faster than software only operation. The synthesized H/W and S/W module cooperated to succeed in compressing the CCITT standard document.

• Proceedings of the Korean Institute of Navigation and Port Research Conference
• /
• 2022.11a
• /
• pp.388-389
• /
• 2022

Recently, AI (Artificial Intelligence) has been applied to various technologies such as automatic driving, robot and smart communication. Currently, AI system is developed by software-based method using tensor flow, and GPU (Graphic Processing Unit) is employed for processing unit. However, if software-based method employing GPU is used for AI applications, there is a problem that we can not change the internal circuit of processing unit. In this method, if high-level jobs are required for AI system, we need high-performance GPU, therefore, we have to change GPU or graphic card to perform the jobs. In this work, we developed a CNN-based FPGA (Field Programmable Gate Array) chip to solve this problem.

• KIPS Transactions on Computer and Communication Systems
• /
• v.11 no.1
• /
• pp.1-8
• /
• 2022

RISC-V is an open-source instruction set architecture which has a simple base structure and can be extensible depending on the purpose. In this paper, we designed a small and low-power 32-bit RISC-V processor to establish the base for research on RISC-V embedded systems. We designed a 2-stage pipelined processor which supports RISC-V base integer instruction set except for FENCE and EBREAK instructions. The processor also supports privileged ISA for trap handling. It used 1895 LUTs and 1195 flip-flops, and consumed 0.001W on Xilinx Zynq-7000 FPGA when synthesized using Vivado Design Suite. GPIO, UART, and timer peripherals are additionally used to compose the system. We verified the operation of the processor on FPGA with FreeRTOS at 16MHz. We used Dhrystone and Coremark benchmarks to measure the performance of the processor. This study aims to provide a low-power, high-efficiency microprocessor for future extension.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.7
• /
• pp.1259-1265
• /
• 2006

In this paper, we propose a combined synthetic algorithm of the logic level for high speed FPGA design. The algorithm divides critical path to reduce delay time and generates a circuit which the divided circuits execute simultaneously. This kernel selection algorithm is made by C-langage of SUN UNIX. We compare this with the existing FlowMap algorithm. This proposed algorithm shows result on 33.3% reduction of delay time by comparison with the existing algorithm.