• Korean Journal of Environment and Ecology
• /
• v.34 no.3
• /
• pp.249-258
• /
• 2020

This study aims to provide reference material for effective forest management techniques at the catchment scale, based on the field investigation of large woody debris (LWD) in 11 streams within a third-order forest catchment in Gangwon Province, Korea. To achieve this aim, we analyzed the morphological features of LWD pieces, and the storage and distribution status of LWD by stream order throughout the entire investigation. As a result, a total of 1,207 individual pieces of LWD were categorized into three types as follows: (ⅰ) 1,142 pieces (95%) as only trunk and 65 pieces (5%) as a trunk with root wad, (ⅱ) 1,015 pieces (84%) as non-thinned and 192 pieces (16%) as the thinned, and (ⅲ) 1,050 pieces (87%) as conifer and 157 pieces (13%) as broadleaf. Additionally, in-stream LWD loads (㎥/ha) decreased with increasing stream order, yielding 105.4, 71.3, and 35.6 for first-, second-, and third-order streams, respectively. On the other hand, the ratio of LWD jams to the total LWD volume increased with increasing stream order, yielding 11%, 43%, and 49% for first-, second-, and third-order streams, respectively. Finally, a comparison of the in-stream LWD load with previous studies in several countries around the world indicated that in-stream LWD load was positively correlated with forest stand age even though the climate, topography, forest soil type, forest composition, stand growth rate, disturbance regime, and forest management practices were different. These results could contribute to understanding the significance of LWD as a by-product of forest ecosystems and an indicator of riparian forest disturbance. Based on this, we conclude that advanced forest management techniques, including treatment of thinning slash and stand density control of riparian forest by site location (hillslope and riparian zone, or stream order), should be established in the future, taking the forest ecosystem and the aquatic environment from headwater streams to low land rivers into consideration.

• The Korean Journal of Ecology
• /
• v.16 no.4
• /
• pp.439-457
• /
• 1993

The present study was undertaken to classify and describe the forest vegetation on Imha-dam area, located at the northern part of Kyungsang-pookdo, Korea by the phytosociological method of the Z-M school. The field investigations were carried out in 60 plots around the dam area from May 1, 1991 to October 10, 1992. The vegetation data obtained were classified by the table comparison method. As a result, the following vegetation units were recognized: A. Pinus densiflova community A-a. Miscanthus sinensis group A-b. Carex humilzs group A-c. Typical group B. Quercetum variabili-serratae Kobayashi, Muranaga et Takeda 1976 C. Robinin pseudo-acacia-Conzmeli~ta comnzultis community D. Larix leptolepis community The vascular plant species of these forest communities consist of 63 families, 144 genera, 191 species and 30 varieties. Also the relationship of the vegetation units with their environments such as altitude, slope, topography and soil condition was discussed here. On the basis of the floristic composition, life-form spectrum and soil analysis, a sere for the forest vegetation was proposed as follows: Rohinia pseitdo-acacia-Conz~neli~za communis community and Larix leptolepis community $\rightarrow$ Pinus densiflora community $\rightarrow$ Quercetunz variahili-serratae $\rightarrow$ Quercus mongolica community. Lastly, relating to the nature conservation of dam area, some of plans were discussed.

• Korean Journal of Agricultural and Forest Meteorology
• /
• v.8 no.3
• /
• pp.145-151
• /
• 2006

The purpose of this study was to analyze the relationship between the annual variation in diameter growth of Quercus spp. and climatic factors such as monthly temperature, precipitation and solar radiation in central and northern Korea. Annual diameter growth was measured by using stem cores of 262 Quercus trees, and the correlation between the diameter growth and the climatic factors was analyzed. Mean diameter growth of Quercus spp. in Jungwangsan was larger than that in Woraksan, and mean diameter growth by the species was large in order of Q. serrata>Q. variablis>Q. mongolica>Q. dentata. The diameter growth pattern of Quercus spp. in Woraksan was different from that in Jungwangsan. Positive correlations between diameter growth of Quercus trees and temperature or the solar radiation during July were found in Jungwangsan. Significant correlations between diameter growth and solar radiation during March and precipitation during June were found in Woraksan. It is suggested that climatic factors similarly affect the diameter growth of Quercus spp. in a mountainous terrain, but influences of the climatic factors depend on other environmental conditions such as altitude, topography and soil depth.

• Journal of Forest and Environmental Science
• /
• v.39 no.3
• /
• pp.180-194
• /
• 2023

This study characterize, classify and evaluates the function of topography on spatial variability of some selected soil properties to assist in designing land management that support uniform agricultural production. The study site, an agricultural land, was part of the derived savanna zone in southwest Nigeria. Four soil profile pits each were established along two delineated toposequence and described following the FAO/UNESCO guidelines. Samples were collected from the identified genetic horizons. Properties of four soil series developed on different positions of the two delineated Toposequence viz upper, middle, lower slopes and valley bottom positions respectively were studied. The soil samples were analysed for selected physical and chemical properties and data generated were subjected to descriptive and inferential statistics. The results showed that soil colour, depth and texture varied in response to changes in slope position and drainage condition. The sand content ranged from 61 to 90% while the bulk density ranged between 1.06 g cm^-3 to 1.68 g cm^-3. The soils were neutral to very strongly acid with low total exchangeable bases. Available phosphorus value were low while the extractable micronutrient concentration varied from low to medium. Soils of Asejire and Iwo series mapped in the study area were classified as Typic isohyperthermic paleustult, Apomu series as Plinthic isohyperthermic paleustult and Jago series as Aquic psamment (USDA Soil Taxonomy). These soils were correlated as Lixisol, Plinthic Lixisol and Fluvisol (World Reference Based), respectively. Major agronomic constraints of the soils associations mapped in the study area were nutrient availability, nutrient retention, slope, drainage, texture, high bulk density and shallow depth. The study concluded that the soils were not homogenous, shows moderate spatial variation across the slope, had varying potentials for sustainable agricultural practices, and thus, the agronomic constraints should be carefully addressed and managed for precision agriculture.

• Journal of Environmental Science International
• /
• v.32 no.6
• /
• pp.429-440
• /
• 2023

Quantitative habitat model is established with species occurrence and spatial abundance data, which were usually acquired by professional field ecologists and citizen scientists. The importance of citizen science data is increasing, but the quality of these data needs to be evaluated. This study aims to identify and compare both expert-based data and citizen science data based on the performance power of quantitative models derived from both data sets. A Maximum Entropy (MaxENT) model was developed using eight environmental variables, including climate, topography, landcover and distance to forest edge. The AUC values derived from the MaxENT model were 0.842 and 0.809, respectively, indicating a high level of explanatory power. All environmental variables has similar values for both data sets, except for the distance to forest edge and rice paddy, which was relatively higher for expert-based survey data than that of the citizen science data as the distances increased. This result suggests that habitat model derived from expert-based survey data shows more ecological niche including wider ranges from forest edges and isolated habitat patches of rice paddy. This is presumably because citizen scientists focuses on direct observation methods, whereas professional field surveys investigate a wider variety of methods.

• Proceedings of the Korean Society of Surveying, Geodesy, Photogrammetry, and Cartography Conference
• /
• 2004.04a
• /
• pp.221-226
• /
• 2004

For comparing more than two images, the precise geometric corrections should be preceded because it necessary to eliminate systematic errors due to basic sensor information difference and non-systematic errors due to topographical undulations. In this study, we did sensor modeling using satellite sensor information to make a basic map of change detection for artificial topography. We eliminated the systematic errors which can be occurred in photographing conditions using GCP and DEM data. The Kompsat EOC images relief could be reduced by precise rectification method. Classifying images which was used for change detections by city and forest zone, the accuracy of the matching results are increased by 10% and the positioning accuracies also increased.

• Proceedings of the KSRS Conference
• /
• 2004.10a
• /
• pp.291-293
• /
• 2004

The aim of this study was to cross-validate a spatial probabilistic model of landslide likelihood ratios at Boun, Janghung and Yongin, in Korea, using a Geographic Information System (GIS). Landslide locations within the study areas were identified by interpreting aerial photographs, satellite images and field surveys. Maps of the topography, soil type, forest cover, lineaments and land cover were constructed from the spatial data sets. The 14 factors that influence landslide occurrence were extracted from the database and the likelihood ratio of each factor was computed. 'Landslide susceptibility maps were drawn for these three areas using likelihood ratios derived not only from the data for that area but also using the likelihood ratios calculated from each of the other two areas (nine maps in all) as a cross-check of the validity of the method For validation and cross-validation, the results of the analyses were compared, in each study area, with actual landslide locations. The validation and cross-validation of the results showed satisfactory agreement between the susceptibility map and the existing landslide locations.

• Proceedings of the KSRS Conference
• /
• v.2
• /
• pp.840-843
• /
• 2006

The aim of this study was to detect landslide using satellite image and apply the landslide to probabilistic landslide-susceptibility mapping at Gangneung area, Korea using a Geographic Information System (GIS). Landslide locations were identified by change detection technique of KOMSAT-1 (Korea Multipurpose Satellite) EOC (Electro Optical Camera) images and checked in field. For landslide-susceptibility mapping, maps of the topography, geology, soil, forest, lineaments, and land cover were constructed from the spatial data sets. Then, the sixteen factors that influence landslide occurrence were extracted from the database. Using the factors and detected landslide, the relationships were calculated using frequency ratio, one of the probabilistic model. Then, landslide-susceptibility map was drawn using the frequency ration and finally, the map was verified by comparing with existing landslide locations. As the verification result, the prediction accuracy showed 86.76%. The landslide-susceptibility map can be used to reduce hazards associated with landslides and to land cover planning.

• 한국지구물리탐사학회:학술대회논문집
• /
• 2004.08a
• /
• pp.8-21
• /
• 2004

Examples of GPR survey results at a variety of archaeological sites are presented. Several new analyses which include static corrections for the tilt of the GPR antenna are shown for imaging of burial mounds with significant topography. Example archaeological site plans developed from GPR remote sensing of Roman and Japanese sites are given. The first completely automated GPR survey, using only Global Positioning Satellite navigation to create 3D data volumes, is employed for a site in Louisiana to detect lost graves of the Choctaw Indian Tribe.

• The Journal of Engineering Geology
• /
• v.3 no.1
• /
• pp.63-74
• /
• 1993

There is many differences in morphology according to the geology in the basin of the Mortagne. The upstream where the substratum is composed of mainly the sandstone and conglomerate has the mountainous relief and the steep slope, so it is covered with the forest in regard to land use. Also the dimate influenced by the topography brings much of the predpitation and causes low temperature. The monthly oufflow and the peak flow are different between the upstream and downstream by these factors. It seems to be the very common and ordinary phenomena but this study is aimed at presenting the possibility of the quantitative amrnation between the factors and the flow regime in the future.