• The Journal of the Korea institute of electronic communication sciences
• /
• v.7 no.4
• /
• pp.707-714
• /
• 2012

After a single-stage, second-order, multiple-feedback ${\Delta}-{\Sigma}$ modulator and a two-stage, second-order MASH ${\Delta}-{\Sigma}$ modulator were analyzed and simulated using Simulink and Matlab and their characteristics were compared, the following result was obtained: 1) The two ${\Delta}-{\Sigma}$ modulators do not have group delay distortion. 2) The characteristics of the noise shaping are nearly identical. As a result of the noise shaping, the power spectral densities have slope of 40 dB/dec. 3) There was no spurious tone. 4) The input range of the two modulators is from -1 to +1 in common. 5) Because the output of the two-stage MASH modulator is 2-bits (4-levels), design of frequency dividers and charge pumps of PLL are more demanding.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.1
• /
• pp.56-67
• /
• 2012

In this thesis, to compensate the sweep nonlinearity occurring in the high resolution radar system using FMICW or FMCW, the method of the estimation of the nonlinearity is proposed. The nonlinear phase component caused by the nonlinear characteristic of the radar system is modelled as a linear combination of the sinusoidal functions consisting of various magnitudes and phases(systematic nonlinear phase error) and a random component(stochastic nonlinear phase error). From two IF signals that are measured respectively independently for two reference point targets lying in different distances which are known, a sparse linear equation is made and solved by least squares method to estimate the nonlinear phase component. The estimated component can be used for predistortion method to compensate the sweep nonlinearity.

• The Journal of the Convergence on Culture Technology
• /
• v.9 no.5
• /
• pp.517-522
• /
• 2023

Existing radars have been developed by applying RF sub-array algorithms, and recently, fully digital Multiple-Input Multiple-Output (MIMO) radar algorithms have been implemented for vehicle radars. In this paper, the radar algorithm applying the Phased MIMO method to the hardware of the RF sub-array method, which is an unsecured technology, was implemented and verified in real time. In order to secure RF sub-array Phased MIMO algorithm technology, a hardware structure for FPGA-based real-time signal processing was presented, and performance was first predicted through design and simulation. Through this, the digital signal of FPGA-based broadband MIMO FMCW radar The processing hardware was developed, and the Phased MIMO radar algorithm of the RF sub-Array method was finally implemented and verified in real time. Based on this, it is judged that it will be possible to secure and apply core technologies necessary for terahertz band radar in the future.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.11
• /
• pp.1297-1306
• /
• 2012

This work presents a 77 GHz radar transmitter for the automotive radar system. An integrated 13 GHz frequency synthesizer fabricated using 130 nm RF CMOS process drives a commercial W-band compound semiconductor monolithic multifunction amplifier(MPA), which includes a frequency multiplier by six to generate 77 GHz transmitting signal. The 13 GHz frequency synthesizer includes a high efficiency injection buffer of 4 dBm output power to drive the MPA. The output power of 77 GHz radar transmitter is higher than 13.99 dBm and the magnitude of the reference spur relative to the carrier is -36.45 dBc. The phase noise is -81 dBc/Hz at 1 MHz offset frequency from the carrier.

• Korean Journal of Remote Sensing
• /
• v.39 no.6_1
• /
• pp.1245-1254
• /
• 2023

Significant research has been conducted on the W-band synthetic aperture radar (SAR) system that utilizes the 77 GHz frequency modulation continuous wave (FMCW) radar. To reconstruct the high-resolution W-band SAR image, it is necessary to transform the point cloud acquired from the stereo cameras or the LiDAR in the direction of 6 degrees of freedom (DOF) and apply them to the SAR signal processing. However, there are difficulties in matching images due to the different geometric structures of images acquired from different sensors. In this study, we present the method to extract an optimized depth map by obtaining 6 DOF of the point cloud using a gradient descent method based on the entropy of the SAR image. An experiment was conducted to reconstruct a tree, which is a major road environment object, using the constructed W-band SAR system. The SAR image, reconstructed using the entropy-based gradient descent method, showed a decrease of 53.2828 in mean square error and an increase of 0.5529 in the structural similarity index, compared to SAR images reconstructed from radar coordinates.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.20 no.2
• /
• pp.133-140
• /
• 2020

We discuss the method of a high precision range trigger and generation for a high range resolution radar. To verify the designed range resolution performance, we use test-equipments which can absolutely make a precision range shorter than the desined range resolution. The accuracy of generated range is proportional to the system reference clock. However, the system main processor is limited to input reference clocks and a higher available one is expensive in the conventional method. To solve this problem, we proposed that the range trigger and generation method using multi-phase-shiftings and integration. Through a experiment, we verified that the proposed method made problems which can be ocurred in the conventional method clear.

• The Journal of Korea Institute of Information, Electronics, and Communication Technology
• /
• v.12 no.4
• /
• pp.434-439
• /
• 2019

This paper proposed a control algorithm to compensate the delay time to improve the signal to noise, and the proposed control algorithm estimate the target information to apply the continuous wave radar equation. The proposed control algorithm improves the output signal of each array element bv multiplying the weight of the receive signal to the signal to noise ratio. Radar radiate a signal in spatial and the target information is estimated by the echoed signal from the target. But the signal in the wireless communication environment occurs the delay time due to the multipath which appear human and natural structures. It is difficult to accurately estimate the desired information because of the degradation for the system performance due to the interference signal and the signal distortion. The target information can be improved by compensating the delay signal to apply the weight to the received signal by using the uniform linear array antenna. As a simulation result, we show that the performance of the proposed control algorithm and the non-compensated delay time are compared. The proposed control algorithm proved that the target distance estimation information is improved.

• Proceedings of the Korean Institute of Information and Commucation Sciences Conference
• /
• 2003.10a
• /
• pp.66-70
• /
• 2003

In this paper a plannar singly balanced diode Miter for 24GHz band application is designed and implemented using a microstrip line and two schottky barrier beam lead mixer diodes. The implemented mixer have a conversion loss of 6 [dB], LO/RF isolation of 23 [dB], input 1dB compression point of 4 [dBm]. this diode mixer would be useful for homedyne radar.

• Proceedings of the IEEK Conference
• /
• 2001.06e
• /
• pp.25-28
• /
• 2001

This paper introduce a millimeter-wave radar system. As Fig 1 shows, This system consists of millimeter-wave radar front-end and digital signal processing parts through receive waves regarding up-coming obstacles. The system works as follow process; (1) Generate regular tripodal waves using the FMCW pulse generator (2) Transmit/Receive waves regarding up-coming obstacles (3) Analog filtering (4) FIFO memory interface (5) FFT(Fast Fourier Transform) (6) Calculation of distance / speed between cars (7) Object display and calibration. We have progress to solve the problem like as increase of traffic accidents causing damage and injuries due to the increased number of motor vehicles and long distance driving, and Need for a device to help drivers who are in trouble due to bad weather conditions. We are expect to Take the lead as a core technology in the ITS industry and to develop circuit and signal processing technologies related to millimeter-wave bandwidth.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.23 no.1
• /
• pp.85-95
• /
• 2012

In this thesis, we develop a spectral analysis scheme to eliminate the spurious peaks generated in HRR Millimeterwave Seeker based on FMICW system. In contrast to FMCW system, FMICW system generates spurious peaks in the spectrum of its IF signal, caused by the periodic discontinuity of the signal. These peaks make the accuracy of the system depend on the previously estimated range if a band pass filter is utilized to eliminate them and noise floor go to high level if random interrupted sequence is utilized and in case of using staggering process, we must transmit several waveforms to obtain overlapped information. Using the spectral analysis one of the schemes such as IAA(Iterative Adaptive Approach) and SPICE(SemiParametric Iterative Covariance-based Estimation method) which were introduced recently, the spurious peaks can be eliminated effectively. In order to utilize IAA and SPICE, since we must distinguish between reliable data and unreliable data and only use reliable data, STFT(Short Time Fourier Transform) is applied to the distinguishment process.