• Asian-Australasian Journal of Animal Sciences
• /
• v.11 no.5
• /
• pp.510-521
• /
• 1998

The effects of two types of protein, soybean meal (SBM) and fish meal (FM); and two types of energy supplements, corn flour (CF) and paper pulp (PP), on intake of guinea grass (Panicum maximum), fibre digestion and microbial activities in four Merino rams with an average weight of $54.4{\pm}4.5kg$ were studied. Each animal was fitted with a ruminal cannula and a duodenal cannula at the proximal position. The animals were fed twice daily with chopped guinea grass (5 cm) ad libitum and one of the four dietary supplements: 170 g FM+268 g PP; 170 g FM+268 g CF; 200 g SBM+200 g PP or 200 g SBM+200 g CF. All the supplements were mixed with 100 g molasses. In sacco and in vivo digestibilities, digesta flow rates, fermentation and microbial population were studied in a $4{\times}4$ Latin square design with a $2{\times}2$ factorial arrangement of dietary treatments. The effects of energy or protein sources were not significant on grass intake of sheep. The potential degradabilities of NDF and ADF were not significantly affected by any of the supplements. However, the energy and protein sources had significant efects on disappearance rate of NDF and ADF. The disappearance rate of both NDF and ADF were significantly (p < 0.05) higher in animals fed PP when compared to animals fed CF. Animals fed FM also showed significantly (p < 0.03) higher disappearance rate of ADF than those fed SBM. Animals fed PP showed better digestion in the rumen and total tract. Total flow of NDF and ADF through the duodenum was not significantly affected by the various supplements. The mean rumen pH values (5.8-6.1) were not significantly different among the four different diets. The concentration of rumen ammonia was significantly (p < 0.0001) higher in animals fed SBM (235-266.4 mg N/L) supplement than in animals fed FM (174.9-179.7 mg N/L), while total VFA concentration was not significantly affected by both energy and protein supplements. Mean values of total VFA ranged from 72.5-82.3 mM. Molar proportions of acetate, propionate and butyrate were typical of a roughage type fermentation. Molar proportion of acetate was significantly (p < 0.0001) higher in sheep fed PP when compared to sheep fed CF. Animals fed FM had higher total viable bacterial counts, while animals fed CF showed higher protozoal numbers. Proportions of cellulolytic bacteria were only slightly higher in animals fed SBM or PP.

• Asian-Australasian Journal of Animal Sciences
• /
• v.10 no.6
• /
• pp.643-651
• /
• 1997

This experiment was conducted to determine apparent ileal and fecal digestibilities of protein sources for young pigs (15.6 kg BW) which were fitted with simple ileal T-cannulas. Experimental diets included one of the followings as a sole protein source: spray-dried plasma protein (SDPP), spray-dried blood meal (SDBM), soybean meal (SBM), isolated soy protein (ISP), dried skim milk (DSM), and fish meal (FM). The digestibilities of dry matter (DM), gross energy (GE) and crude protein (CP) in DSM-based diet were the highest (p < 0.05), and those of SDBM and SBM diets were the lowest at the terminal ileum. The average ileal digestibilities of essential amino acids (AAs) were 88.3, 84.7, 84.6, 83.4, 83.0 and 77.7% for pigs fed the DSM, ISP, SDBM, SBM, SDPP and FM diets, respectively. There were no significant differences in overall apparent ileal AAs digestibilities in DSM and ISP diets. Digestibilities of essential AAs in DSM, however, were significantly higher than those of ISP (p < 0.05). Among the essential AAs, the digestibility of arginine was higher except for SDBM or DSM, than other AAs. The ileal digestibilities of lysine, methionine and threonine were higher (p < 0.05) in pigs fed SDBM or DSM diet than in those fed SBM diet. Digestibilities for SDPP or ISP diet in these AAs were similar except for threonine which was higher (p < 0.05) for SDPP diet. The apparent ileal digestibilities of lysine and methionine ranged from 79.6 (FM) to 92.5 (DSM) and 75.4 (SDPP) to 88.7 (DSM), respectively. The apparent fecal digestibilities of average essential AAs were 90.4, 89.1, 86.0, 84.4, 84.2 and 80.8% in pigs fed the DSM, ISP, SDBM, SDPP, SBM and FM diets, respectively. The fecal digestibilities of essential AAs were higher (p < 0.05) in pigs fed the DSM and ISP. Lysine digestibility in pigs fed the DSM or ISP diet was higher (p < 0.05) than that of pigs fed SBM diet. Apparent essential AAs digestibility was the highest (p < 0.05) in pigs fed DSM diet, and was the lowest (p < 0.05) in pigs fed FM diet. Digestiibilities of essential AAs and nonessential AAs were higher when measured over the total digestive tract than at the end of the small intestine except for several AAs in SDPP, SDBM and SBM diets. In conclusion, whether it is fecal or ileal, the digestibilities of proximate nutrients and AAs in pigs fed DSM and ISP diet were the highest, and those of pigs fed FM was the lowest.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.45 no.1
• /
• pp.28-34
• /
• 2017

This study was carried out to investigate growth characteristics of woody plants that are widely used indoors in accordance with irrigation frequency and to find the optimum irrigation conditions for plants that help to improve the indoor environment. Four woody plants used in this study included Ardisia pusilla, Clusia rosea, Fatsia japonica, and Ficus elastica. They were planted in pots with a diameter of 10cm and cultivated in three different irrigation frequencies: two times per week, one time per week, and one time per two weeks. After 120 days, they were measured by plant height, fresh weight, dry weight, SPAD value, leaf color, leaf water potential, chlorophyll fluorescence (Fv/Fm), and photosynthetic rate. The average soil moisture content was $48.8{\pm}2.1%$ in two times per week, $25.2{\pm}4.4%$ in one time per week, and $10.3{\pm}2.4%$ in one time per two weeks. For A. pusilla, leaf water potential was higher, and Fv/Fm value was 0.731 in two times per week irrigation, showing more wetness. For A. pusilla, F. japonica and F. elastica photosynthetic rate was significantly lower in one time per two weeks irrigation, appearing to be more sensitive to drying than C. rosea. When irrigated one time per week, with the soil's volume average moisture content of 25%, all four woody plants used in this experiment proved to grow smooth. Thus, it was determined to be good for use in indoor landscaping.

• The Korean Journal of Petroleum Geology
• /
• v.14 no.1
• /
• pp.1-11
• /
• 2008

As conventional oil and gas reservoirs become depleted, interests for oil sands has rapidly increased in the last decade. Oil sands are mixture of bitumen, water, and host sediments of sand and clay. Most oil sand is unconsolidated sand that is held together by bitumen. Bitumen has hydrocarbon in situ viscosity of >10,000 centipoises (cP) at reservoir condition and has API gravity between $8-14^{\circ}$. The largest oil sand deposits are in Alberta and Saskatchewan, Canada. The reverves are approximated at 1.7 trillion barrels of initial oil-in-place and 173 billion barrels of remaining established reserves. Alberta has a number of oil sands deposits which are grouped into three oil sand development areas - the Athabasca, Cold Lake, and Peace River, with the largest current bitumen production from Athabasca. Principal oil sands deposits consist of the McMurray Fm and Wabiskaw Mbr in Athabasca area, the Gething and Bluesky formations in Peace River area, and relatively thin multi-reservoir deposits of McMurray, Clearwater, and Grand Rapid formations in Cold Lake area. The reservoir sediments were deposited in the foreland basin (Western Canada Sedimentary Basin) formed by collision between the Pacific and North America plates and the subsequent thrusting movements in the Mesozoic. The deposits are underlain by basement rocks of Paleozoic carbonates with highly variable topography. The oil sands deposits were formed during the Early Cretaceous transgression which occurred along the Cretaceous Interior Seaway in North America. The oil-sands-hosting McMurray and Wabiskaw deposits in the Athabasca area consist of the lower fluvial and the upper estuarine-offshore sediments, reflecting the broad and overall transgression. The deposits are characterized by facies heterogeneity of channelized reservoir sands and non-reservoir muds. Main reservoir bodies of the McMurray Formation are fluvial and estuarine channel-point bar complexes which are interbedded with fine-grained deposits formed in floodplain, tidal flat, and estuarine bay. The Wabiskaw deposits (basal member of the Clearwater Formation) commonly comprise sheet-shaped offshore muds and sands, but occasionally show deep-incision into the McMurray deposits, forming channelized reservoir sand bodies of oil sands. In Canada, bitumen of oil sands deposits is produced by surface mining or in-situ thermal recovery processes. Bitumen sands recovered by surface mining are changed into synthetic crude oil through extraction and upgrading processes. On the other hand, bitumen produced by in-situ thermal recovery is transported to refinery only through bitumen blending process. The in-situ thermal recovery technology is represented by Steam-Assisted Gravity Drainage and Cyclic Steam Stimulation. These technologies are based on steam injection into bitumen sand reservoirs for increase in reservoir in-situ temperature and in bitumen mobility. In oil sands reservoirs, efficiency for steam propagation is controlled mainly by reservoir geology. Accordingly, understanding of geological factors and characteristics of oil sands reservoir deposits is prerequisite for well-designed development planning and effective bitumen production. As significant geological factors and characteristics in oil sands reservoir deposits, this study suggests (1) pay of bitumen sands and connectivity, (2) bitumen content and saturation, (3) geologic structure, (4) distribution of mud baffles and plugs, (5) thickness and lateral continuity of mud interbeds, (6) distribution of water-saturated sands, (7) distribution of gas-saturated sands, (8) direction of lateral accretion of point bar, (9) distribution of diagenetic layers and nodules, and (10) texture and fabric change within reservoir sand body.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.46 no.1
• /
• pp.1-8
• /
• 2018

The purpose of this study was to investigate the effects of light intensity on the initial growth response of three woody plants for indoor landscaping; Ardisia pusilla, Clusia rosea and Fatsia japonica. The plants were planted in 10cm pots, the light intensities used were of four levels-15, 30, 60, $120{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$ PPFD-and light irradiation time was set to 12/12 (day/night). Growth responses including plant height, leaf length, leaf width, chlorophyll fluorescence (Fv/Fm), SPAD and Hunter values were measured at 4-week intervals, and shoot weight and root weight of fresh and dry plants were measured after completion of the experiment. Fatsia japonica tended to show greater leaf length and leaf width as light intensity became greater, while other plants did not show any significant differences at different light intensities. The Fv/Fm value of the Ardisia pusilla was found to be stressed at 60 and $120{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, while the Fv/Fm values were within normal range with other plants or at other light intensity levels to show no stress. Only Clusia rosea showed significantly different SPAD values at $120{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, and there was no significant SPAD value difference found with other plants or at other light intensity levels. While Hunter values of the Ardisia pusilla did not show any significant differences at any light intensity levels, Clusia rosea and Fatsia japonica showed specificity in L, a and b values at 60 and $120{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, respectively. Ardisia pusilla showed a big stem growth at $120{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$, and Clusia rosea showed a steady growth at 60 and $120{\mu}mol{\cdot}m^{-2}{\cdot}s^{-1}$.

• Current Applied Physics
• /
• v.18 no.11
• /
• pp.1248-1254
• /
• 2018

Magnetization versus temperature and magnetic-field measurements, M(T, $H_a$), have been carried out to study the magnetic and critical properties of polycrystalline $La_{1-x}Ba_xCoO_3$ (x = 0.3 and 0.5) cobaltites. These compounds with the density of ${\sim}6.2g/cm^3$ crystallized in the $R{\bar{3}}c$ rhombohedral and $Pm{\bar{3}}m$ cubic structures, respectively. With an applied field $H_a=200Oe$, M(T) data have revealed that the samples with x = 0.3 and 0.5 exhibit the ferromagnetic-paramagnetic (FM-PM) phase transition at the Curie temperature points $T_C=202$ and 157 K, respectively. At 4.2 K, the saturation magnetization ($M_{sat}$) decreases from 35.9 emu/g for x = 0.3-26.1 emu/g for x = 0.5. Particularly, the critical-behavior analyses in the vicinity of $T_C$ reveal all samples undergoing a second-order phase transition, with critical exponent values (${\beta}=0.328$ and ${\gamma}=1.251$ for x = 0.3, and ${\beta}=0.331$ and ${\gamma}=1.246$ for x = 0.5) close to those expected for the 3D Ising model. This proves short-range magnetic order existing in $La_{1-x}Ba_xCoO_3$. We believe that magnetic inhomogeneities due to the mixture of hole-rich FM regions (confined in the trivalent-cobalt hole-poor anti-FM matrix) and uniaxial anisotropy prevent long-range order in $La_{1-x}Ba_xCoO_3$.

• Journal of Magnetics
• /
• v.22 no.1
• /
• pp.7-13
• /
• 2017

The magnetoresistance (MR) properties of antiferromagnetic (AFM) IrMn based giant magnetoresistance-spin valve (GMR-SV) was investigated in view point of the artificial rotation effect of ferromagnetic (FM) layer in the plane induced by an applied field during the post annealing temperature. The MR curves measured with an azimuthal angle region of ${\phi}=0^{\circ}-360^{\circ}$ are depended on the annealing temperature and the magnetization easy axis of two free NiFe layers and two pinned NiFe layers in dual-type GMR-SV film. Especially, the annealing temperature and sample rotation angle(${\theta}$ ) maintained to the magnetic sensitivity (MS) of 1.4 %/Oe with an isotropic region angle of $110^{\circ}$ are $100^{\circ}C$ and $90^{\circ}$, respectively.

• Journal of Biomedical Engineering Research
• /
• v.29 no.2
• /
• pp.114-121
• /
• 2008

Within 2 to 5 months after stroke, patients recover variable degrees of function, depending on the initial deficit. An impaired hand function is one of the most serious disability in chronic stroke patients. Therefore, to evaluate the extent of motor dysfunction in the hemiplegic hand is important in stroke rehabilitation. In this paper, motor recoveries in 8 chronic stroke patients with Fugl-Meyer (FM) and white matter changes before and after the training program with a designed bilateral symmetrical arm trainer (BSAT) system were examined. The training was performed at 1 hr/day, 5 days/week during 6weeks. In all patients, FM was significantly improved after the 6-week training. Diffusion tensor imaging (DTI) results showed that tractional anisotropy ratio (FAR) and fiber tracking ratio (FTR) in the posterior internal capsule were significantly increased after the training. It seemed that the cortical reorganization was induced by the 6 week training with the BSAT. In all parameters proposed this study, a significant correlation was found between these parameters (FAR and FTR) and motor recoveries. This study demonstrated that DTI technique could be useful in predicting motor recovery in chronic hemiparetic patients.

• 전기의세계
• /
• v.22 no.1
• /
• pp.35-41
• /
• 1973

An automatic point traffic control method is recommended for more idealistic traffic flow over coarse road netowrks. The automatic control apparatus recommended, consists of a transceiver, amplifier, digital-to-analog converter, signal light controller for emergency and steady state, and digital counter as monitor. The transmitter sends a signal to the target vy means of Microwave-FM-CW and a diode detector picks up the echo signal. Thus the operation of the entire system will be carried out through an open loop state. Some factors necessary for an ideal detector system are rapid response, longevity and stability. An analytical method of the Doppler effect substitutes the conventional frequency deviation into the amplitude of detector output. The changing rate of amplitude is proportional to the voltage of the detector output. Some induced formula from Maxwell's radiation field theory ensures this new method, and, new method, and proves the fact with an experimental data presentation. Stability depends upon Klystron as an oscillator and a diode as a detector. the transceiver installation affects on the response and sensitivity of the system. In accordance with the detector output, several targets are easily classified by amplitudes on the scope. The traffic flow, i.e., target movement which is analyzed by the amplitude method, is shown through the scope and indicates it on the digital counter. The best efficiency for the amplitude analysis can be attained through use of an antenna having the highest sensitivity.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.12 no.8
• /
• pp.3683-3703
• /
• 2018

Wireless sensor networks (WSNs) consist of set of sensor nodes. These sensor nodes are deployed in unattended area which are able to sense, process and transmit data to the base station (BS). One of the primary issues of WSN is energy efficiency. In many existing clustering approaches, initial centroids of cluster heads (CHs) are chosen randomly and they form unbalanced clusters, results more energy consumption. In this paper, an energy efficient clustering protocol to prevent unbalanced clusters based on firefly and midpoint algorithms called EEC-FM has been proposed, where midpoint algorithm is used for initial centroid of CHs selection and firefly is used for cluster formation. Using residual energy and Euclidean distance as the parameters for appropriate cluster formation of the proposed approach produces balanced clusters to eventually balance the load of CHs and improve the network lifetime. Simulation result shows that the proposed method outperforms LEACH-B, BPK-means, Park's approach, Mk-means, and EECPK-means with respect to balancing of clusters, energy efficiency and network lifetime parameters. Simulation result also demonstrate that the proposed approach, EEC-FM protocol is 45% better than LEACH-B, 17.8% better than BPK-means protocol, 12.5% better than Park's approach, 9.1% better than Mk-means, and 5.8% better than EECPK-means protocol with respect to the parameter half energy consumption (HEC).