• 복식문화연구
• /
• 제15권5호
• /
• pp.852-862
• /
• 2007

This study was to investigate the physical properties and the external characteristics of denim fabrics(100% cotton non-spun denim, 98% cotton/2% polyurethane spun denim) such as tensile strength, thickness and weight, flex stiffness, surface color and shrinkage. The results of the study were as follows. After examining the change of external characteristics of before and after washing finishing for denim fabrics, denim with bio washing had increased pliability compared to denim without washing finishing but the pliability of the denim did not increase according to the intensity or frequency of washing. The luminance change according to washing finishing was high in the order of bio stone bleach washing, bio stone washing, bio washing and denim without washing finishing and the surface color became brighter in accordance with the increase of intensity and frequency of washing finishing.

• 한국염색가공학회지
• /
• 제18권3호
• /
• pp.31-41
• /
• 2006

Functional properties are available with sputtering. But sputtering treatment alone cannot got a good fastness performance to washing, rubbing and light. This research was objected to investigate optimum condition by sputtering on polyester through various processing conditions such as ion current and treatment time, and then various resin treated onto metal coated polyester fabrics in order to increase washing fastness of metal membrane. As the results, the optimum conditions revealed 1500 mA of ion current, 2 min of treatment time in sputter, and suitable resin concentrations were 2% of o.w.s (on the weight of solution) in resin treatment. Therefore, we could get enhanced anti-static effect and flex stiffness as well as washing fastness in sputtered polyester fabric with various resin treatment, for example, melamine and polyurethane.

• 한국자동차공학회논문집
• /
• 제18권1호
• /
• pp.8-13
• /
• 2010

Many vehicles have significantly under-inflated tires, primarily because drivers infrequently check their vehicles' tire pressure. When a tire is used while significantly under-inflated, its sidewalls flex more and the tire temperature increases, increasing stress and the risk of failure. In this study we evaluated tire safety and economical efficiency at various inflation pressure. For tire safety we performed FMVSS indoor durability test, measurement of rolling tire temperature, braking performance at dry/wet road condition, and rolling resistance test for economical efficiency. Results show that low pressure decreases tire durability of both speed-increase condition and load-increase condition. Heat temperature of rolling tire increases as pressure decreases and significantly under-inflated tires cause increase of vehicle's stopping distance at wet road condition. Also Under-inflation increases the rolling resistance of a tire and, correspondingly, decreases vehicle's fuel economy.

• 한국운동역학회지
• /
• 제15권2호
• /
• pp.21-29
• /
• 2005

The Purpose of this study was to seek determinant factors through analysis of 65 snatch skill kinematic factors of Athletics participated in 2001 Asian weightlifting competetion. The conclusion were as follows ; 1. In order to enhance snatch skill, when barbell move on knee position, One should be flex knee joint to 105-110 degree, and In pull motion, One should be move powerful extension of knee and hip joint. 2. In last pull motion, One try to make more lock out motion than extra extention motion of hip joint 3. In order to enhance snatch skill, It is inportant that elevate barbell highly by last pull motion through powerful knee extention, poweful hip flextion and One should be make lock out motion fast in the same time. 4. In order to enhance snatch skill, anterior-posterior movement width of shoulder joint should be small. 5. In order to enhance snatch skill, Hip joint should be move vertically on start and lock out phase, but In pull phase, extension motion of hip joint shoulde be performed more largely and powerfully.

• Tribology and Lubricants
• /
• 제10권2호
• /
• pp.39-42
• /
• 1994

This paper deals with the distributions of the contact stress in oil seals. The distributions of the contact stress due to the temperature effects are analyzed for various values of the interference for a nitrile rubber seal. The calculated FEM results show that the relative maximum stresses occur at the contacting area against the shaft, the flex zone, and the contacting area of the garter spring grooves. Using the coupled temperature-stress FEM a nalysis, the contact force of a radial lip seal with and without the garter spring are studied as a function of shaft diameter. The calculated results of mechanical analysis show good correspondence with those of the coupled thermal-mechanical analysis method except small values of the interference. And the calculated results indicated that the thermal stresses only have a very minor influence on the deformed shape of the lip seal as the interference increases. But the coupled temperature-stress analysis will be very useful tool to predict the contact behaviors of rubber lip seals for small values of the interference.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2011년도 제42회 하계학술대회
• /
• pp.1404-1404
• /
• 2011

Shortage of fossil fuel energy makes current industry to find a new energy sources. One of the solutions is using the renewable energy sources like wind, sun, water, and so on. If we think with flex idea, the existing PV system's role can be greatly changed. So in this paper, I want to suggest some ideas for PV systems as one of outstanding energy source. The specific and technical explanation will be shown in the following paper in detail.

• 한국안전학회지
• /
• 제16권1호
• /
• pp.79-83
• /
• 2001

Posture of the upper limbs in field works is known to be an important risk factor associated with CTD(Cumulative Trauma Disorders). In particular, uncomfortable posture and highly repetitive works in shipbuilding industry(for instance, sand blasting, grinding and blast painting, etc) made workers exposed to a great risk of injuries. The purpose of this paper is to analyze recruitment pattern of the muscles according to posture(joint angle displacement) during grinding. In this study, EMG signals of pectoralis major, latissimus dorsi, and posterior deltoid muscle were measured and analyzed from FlexComp EMG solution. And subjective ratings of perceived exertion were made using Borg's CR-10 rating scale.

• 한국응용약물학회:학술대회논문집
• /
• 한국응용약물학회 1994년도 춘계학술대회 and 제3회 신약개발 연구발표회
• /
• pp.240-240
• /
• 1994

1. 천연 항염증 물질의 분리 천연 항염증 약물 개발을 목표로 하여 한방과 민간에서 소염, 진통의 목적으로 이용되는 식물들을 대상으로 Carrageenin에 의해 유도된 백서 후족 부종의 억제를 지표로 Screening을 행한 결과, 2종의 식물의 부탄을 엑스가 항염증 활성을 나타내었다. 즉, 호랑가시나무(flex cornuta L. ) 잎 및 쑥부쟁이 (Aster yomena Makinc)의 부탄을 엑스가 Aspirin(300mg/kg)에 필적하는 항염증작용을 나타내었다. 이 식물들의 부탄을 엑스로 부터 각각 2종의 화합물을 분리하였다. 호랑가시나무로 부터는 01eanane type의 monodesmoside와 Pomolic acid bisdesmoside가, 쑥부쟁이로 부터는 Hederagenin bisdesmoside및 구조 미확정의 물질이 각각 분리되었다. 2.천연 항염증 물질의 구조 변환 항염증 약물로 많이 이용되고 있는 시호(Bupleurum falcatum L.)의 유효성분인 Saikosaponin-a의 용해도 개선을 위하여 그 유도체를 합성하였다. 합성된 Saikosaponin-a hemisuccinate의 K염은, 용해도 시험 결과 현저한 용해도 증가를 보였다.

• 전기학회논문지P
• /
• 제60권4호
• /
• pp.206-213
• /
• 2011

Line sleeves, which used to connect ACSR cables when transmission lines were constructing, sometimes cause power transmission failure due to deterioration and corrosion. Therefore, power transmission line should be inspected regularly to prevent national disaster. Current inspection tool detects insertion length of transmission line on line sleeves, the inspection tool includes enormous error by operator. Moreover, the system is not controlled remotely, negligent accident would be caused while inspecting. To deal with those problems, KEPCO reviewed several ways to inspect line sleeves and proposes new method to inspect line sleeve by measuring magnetic flex which penetrate junction of steel and aluminum sleeve. The developed inspection tool is reliable enough to detect eccentric sleeves. Also, the developed inspection device was applied on actual transmission line and verified its effectiveness.

• 한국정보처리학회:학술대회논문집
• /
• 한국정보처리학회 2017년도 춘계학술발표대회
• /
• pp.1086-1087
• /
• 2017

최근 HMD 디바이스의 발달 및 그래픽 소프트웨어의 발달로 인해 현실과 유사한 느낌을 주는 가상현실 플랫폼 및 컨텐츠 개발이 활발히 이루어지고 있는 추세이다. 하지만, 현재 가상현실 플랫폼은 가상현실 환경과 사용자를 이어주는 UI가 불확실하고 사용법이 직관적이지 않다는 단점을 가지고 있다. 또한, 가상현실을 위한 컨트롤러들은 다양한 형태와 각각 다른 소프트웨어를 사용하고 있어 가상현실 컨텐츠를 이용하는데 제한적이라는 단점이 있다. 본 논문에서는 이러한 단점들을 보완하기 위해 플렉스 센서를 이용한 컨트롤러를 제작하고 이를 가상현실 내에서 출력한 모습에 대한 방법에 대해 설명하며, 추후 이를 활용하여 체감이 가능한 가상현실 컨텐츠로 발전시킬 수 있을 것을 기대한다.