• Journal of Korean Foot and Ankle Society
• /
• v.28 no.1
• /
• pp.21-26
• /
• 2024

Purpose: Foot pressure measurement devices are used widely in clinical settings for plantar pressure assessments. Despite the availability of various devices, studies evaluating the inter-device reliability are limited. This study compared plantar pressure measurements obtained from HR Mat (Tekscan Inc.) and EMED-n50 (Novel GmbH). Materials and Methods: The study involved 38 healthy male volunteers. The participants were categorized into two groups based on the Meary's angle in standing foot lateral radiographs: those with normal feet (angles ranging from -4° to 4°) and those with mild flatfeet (angles from -8° to -15°). The static and dynamic plantar pressures of the participants were measured using HR Mat and EMED-n50. The reliability of the contact area and mean force was assessed using the interclass correlation coefficient (ICC). Furthermore, the differences in measurements between the two devices were examined, considering the presence of mild flatfoot. Results: The ICC values for the contact area and mean force ranged from 0.703 to 0.947, indicating good-to-excellent reliability across all areas. EMED-n50 tended to record higher contact areas than HR Mat. The mean force was significantly higher in the forefoot region when measured with EMED-n50, whereas, in the hindfoot region, this difference was observed only during static measurements with HR Mat. Participants with mild flatfeet exhibited significantly higher contact areas in the midfoot region for both devices, with no consistent differences in the other parameters. Conclusion: The contact area and mean force measurements of the HR Mat and EMED-n50 showed high reliability. On the other hand, EMED-n50 tended to record higher contact areas than HR Mat. In cases of mild flatfoot, an increase in contact area within the midfoot region was observed, but no consistent impact on the differences between the two devices was evident.

• Korean Journal of Environmental Biology
• /
• v.41 no.4
• /
• pp.427-438
• /
• 2023

Biocide dichlofluanid breaks down quickly and accumulates easily in sediment, potentially causing a persistent impact on various marine organisms. We analyzed the potential toxicity of dichlofluanid on major aquaculture species in Korea, Undaria pinnatifida. Female gametophytes of U. pinnatifida were exposed to dichlofluanid at concentrations of 0, 1, 2, 4, 8, 16, and 32 mg L^-1, and their survival and relative growth rate were analyzed. The no observed effect concentration(NOEC), lowest observed effect concentration (LOEC), and median lethal concentration (LC₅₀) for female gametophyte survival were determined as 1, 2, and 10.82 (95% CI: 8.87-13.23) mg L^-1, respectively. The NOEC, LOEC, and median effective concentration (EC₅₀) for relative growth rate were 1, 2, and 6.58 (95% CI: 6.03-7.17) mg L^-1, respectively. Female gametophytes of U. pinnatifida were expected to experience toxic effects at concentrations above 2 mg L^-1 of dichlofluanid. These research findings are expected to serve as important reference data for evaluating the toxicity effects of U. pinnatifida in its early life stages when exposed to dichlofluanid.

• Land and Housing Review
• /
• v.15 no.3
• /
• pp.1-23
• /
• 2024

In the face of an impending demographic cliff, this research delves into geographical disparities in socioeconomic statuses and living arrangements of young single women in rental housing and also to explore influential factors of their residential assessment and housing expenditure. From the Korean Housing Survey of 2020, the cross-sectional study identified 847 unmarried female single-person householders aged between 20 and 39 in four districts - Seoul and Gyeonggi-Incheon Area (GIA) of Seoul Metropolitan Area (SMA), and metropolises and non-metropolises of non-SMA. The empirical analyses revealed that regardless of regions, most of the respondents were college-educated, salaried employees in late 20s living in a studio flat, seldom bore debt and barely relied on social services. Renters in SMA, employment rate, income and living expenses were higher than those in non-SMA and they resided in small, old but adequate housing with a separate bedroom. In particular, Seoulites suffered from housing cost overburden but most singles in GIA benefited from the lowest housing burden. While the main determinant of residential assessment was livability, housing satisfaction was additionally affected by old housing and the satisfaction with residential environment was also explained by urban amenities. Despite geographical variations, housing expenditure was primarily driven by income and employment.

• Journal of the Korean Society of Earth Science Education
• /
• v.17 no.2
• /
• pp.137-152
• /
• 2024

The purpose of this study is to develop a project-based learning program utilizing Earth science data and to evaluate its effects on students' knowledge-information processing competency and communication and collaboration competency. To achieve this, the ADDIE instructional design model was employed to create the program, which was then implemented with 75 second-year middle school students. The program's effectiveness was assessed using paired sample t-tests on the results of tests measuring knowledge-information processing competency and communication and collaboration competency. Additionally, reflection journals were analyzed to identify students' interest in and difficulties with the program. The study's conclusions are as follows: first, the Earth science data-based project learning program comprises three themes: 'Journey through the Planets of the Solar System,' 'I am a Marine Expert,' and 'Planning a Tidal Flat Experience Program.' Second, following the program's implementation, there was a significant improvement in the overall students' knowledge-information processing competency. Third, the program also led to a significant enhancement in students' communication and collaboration competency. Based on these findings, the study suggests the need for specific and continuous teacher support to provide students with successful experiences through the program, overcoming challenges in program implementation through collaboration with the information subject, and conducting research that microscopically analyzes students' interactions.

• Composites Research
• /
• v.37 no.4
• /
• pp.343-349
• /
• 2024

The use of composite materials for structural fasteners is increasingly common, making it crucial to assess the deformation of these fasteners under fatigue behavior. In this study, clamp-type fasteners were manufactured using carbon fiber reinforced composites, and their structural stability and sectional damage rates were evaluated using electrical resistance measurement during fatigue behavior. While clamp-type composite fasteners exhibited minimal deformation in flat sections, significant deformation occurred in the bent sections due to fatigue. It was observed that insufficient angular stability led to concentrated damage in the bent sections. The dynamic fatigue behavior showed that the length change rate of the composite fasteners was within 0.6%, but the angular change rate reached up to 6%, indicating that the bent sections are the most critical areas. By utilizing the self-sensing capability of the composite fasteners, sectional damage behavior was assessed through electrical resistance measurement. Significant damage was noted in the bent sections due to fatigue, and 3D-CT results revealed substantial deformation and interfacial damage when the initial bend angle of the fasteners was less than 90 degrees. These findings highlight the importance of reinforcing the stiffness of the bent sections and establishing systematic angular standards in the development of composite fasteners.

• The Sea:JOURNAL OF THE KOREAN SOCIETY OF OCEANOGRAPHY
• /
• v.5 no.3
• /
• pp.195-207
• /
• 2000

Organic and inorganic characteristics including bacterial cell number, enzyme activity, nutrients, and heavy metals have been monitored in twelve acrylic experimental tanks for two weeks to estimate and compare self-purification capacities in two Korean wet-land environments, tidal flat and rice field, which are possibly different with the environments in other countries because of their own climatic conditions. FW tanks, filled with rice field soils and fresh water, consist of FW1&2 (with paddy), FW3&4 (without paddy), and FW5&6 (newly reclaimed, without paddy). SW tanks, filled with tidal flat sediments and salt water, are SW1&2 (with anoxic silty mud), SW3&4 (anoxic mud), and SW5&6 (suboxic mud). Contaminated solution, which is formulated with the salts of Cu, Cd, As, Cr, Pb, Hg, and glucose+glutamic acid, was spiked into the supernatent waters in the tanks. Nitrate concentrations in supernatent waters as well as bacterial cell numbers and enzyme activities of soils in the FW tanks (except FW5&6) are clearly higher than those in the SW tanks. Phosphate concentrations in the SW1 tank increase highly with time compared to those in the other SW tanks. Removal rates of Cu, Cd, and As in supematent waters of the FW5&6 tanks are most slow in the FW tanks, while the rates in SW1&2 are most fast in the SW tanks. The rate for Pb in the SW1&2 tanks is most fast in the SW tanks, and the rate for Hg in the FW5&6 tanks is most slow in the FW tanks. Cr concentrations decrease generally with time in the FW tanks. In the SW tanks, however, the Cr concentrations decrease rapidly at first, then increase, and then remain nearly constant. These results imply that labile organic materials are depleted in the FW5&6 tanks compared to the FW1&2 and FW3&4 tanks. Removal of Cu, Cd, As from the supernatent waters as well as slow removal rates of the elements (including Hg) are likely due to the combining of the elements with organic ligands on the suspended particles and subsequent removal to the bottom sediments. Fast removal rates of the metal ions (Cu, Cd, As) and rapid increase of phosphate concentrations in the SW1&2 tanks are possibly due to the relatively porous anoxic sediments in the SW1&2 tanks compared to those in the SW3&4 tanks, efficient supply of phosphate and hydrogen sulfide ions in pore wates to the upper water body, complexing of the metal ions with the sulfide ions, and subsequent removal to the bottom sediments. Organic materials on the particles and sulfide ions from the pore waters are the major factors constraining the behaviors of organic/inorganic elements in the supernatent waters of the experimental tanks. This study needs more consideration on more diverse organic and inorganic elements and experimental conditions such as tidal action, temperature variation, activities of benthic animals, etc.

• Korean Journal of Soil Science and Fertilizer
• /
• v.7 no.1
• /
• pp.17-21
• /
• 1974

This study was performed to find out the organic matter content, and what is more, the relation between its content and major morphological properties of cultivated upland soils in Korea. The results were as follows. 1. The average organic matter content of cultivated upland soils was 1.73 percent, mostly ranging from 0.6 to 2.5 percent. 2. Examining the organic matter content by subgroup of cultivated upland soils. It was found 13 percent in volcanic ash yellowish brown Cambisols and 6.3 percent in Humic yellowish brown Entisols, Fluventic yellowish brown Entisols was found 1.0 percent, lowest one. The average organic matter content of Entisols, Cambisols, and Argillisols was 1.1, 2.1, and 1.8 percent respectively. 3. According to organic matter content by texture of profile, the average content of sandy soils was 1.0 percent; 1.5 percent in coarse loamy soils; and 1.8 percent in fine loamy soils. The organic matter content increased with an increased clay content in coarse texture group, but there was no significant difference between fine loamy and clayey soil group. This tendency was also observed in surface soil texture. 4. In the relation between slope and organic matter content, its content in flat area was 1.3 percent that is rather low compared to 1.6 percent of sloping area. Especially, cultivated upland soils ranging brown 15 to 30 percent in slope were 1.8 percent which is relatively high. 5. The organic matter content have nothing to do with suitability groups. Itss ontent of I, II, III, IV and V class was 1.3, 1.6, 1.7, 1.2 and 2.0 percent respectively.

• Journal of agricultural medicine and community health
• /
• v.30 no.2
• /
• pp.127-135
• /
• 2005

Objectives: This study was conducted to investigate the trend of tuberculosis mortality rate by years and by areas. Methods: We calculated raw and age-adjusted mortality rate of tuberculosis from 1995 to 2002. The calculation was based on the data from resident registration data and death certification registration data gathered by 232 basic local authority. We used direct age standardization method for calculating age-adjusted mortality rate. We compared patterns of change in tuberculosis mortality rate of metropolitan areas, cities, and countryside by determinating the comparability of medels to explore linear relationship. We also analyzed the data of mortality rate between urban and rural area by comparing ANOVA and post-hoc by two periods: one from 1995 to 1998, and the other from 1999 to 2002. Results: In national mortality rate, both raw and age-adjusted mortality rate showed negative linear relationship. However, the graph become more horizontal: the slope line is close to zero. From 1995 to 1998, countryside showed significantly higher age-adjusted mortality rate than in metropolitan areas and cities. Ever after considering more horizontal graph in national mortality rate, the data shows that the countryside still have significantly higher mortality rate from 1999 to 2002. In model diagnostic checking, metropolitan areas and cities showed apparently linear pattern on the decrease of age-adjusted mortality rate. Pattern of mortality rate in countryside was decreased initially, but became flat. Conclusions: Further research is necessary to explore the characteristics of quality of tuberculosis control program in rural area. Different approach and strategies should be considered to decrease tuberculosis mortality rate in rural areas.

• Korean Journal of Food Science and Technology
• /
• v.40 no.4
• /
• pp.430-435
• /
• 2008

The sensory characteristics of imported (two dry, two sweet, and one medium dry wines) and domestic (one sweet wine) red wine were evaluated by 250 panels. The preferences of aroma, color, sweetness, tartness, astringency, and overall acceptability were determined by 5-point just-about-right scale. Among six wines, B sample obtained the highest mean overall acceptability score of 3.67 and its chemical and sensory characteristics were as follow: cherry or strawberry aroma, 9.4 brix, 3.7% of sugar content, pH 3.5, 10% of ethanol, 0.14% of tannin, 5.74 mg/mL of total organic acids, and color of $L(12.04{\pm}0.01)$, $a(33.90{\pm}0.19)$, and $b(8.22{\pm}0.00)$. These results revealed that Korean consumers generally prefer sweet taste to dry one, flat taste to bitter one, and fruity aroma to others. Panels preferred a red wine containing high sugar content of $5{\sim}10%$. On the other hand, panels showed low preference to the wine containing tannin above 0.16%. However, these general trends were slightly varied depending on their ages and consuming frequencies.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.30 no.3 s.151
• /
• pp.378-385
• /
• 2006

To release fashion trends in an efficient way, many of the apparel business and fashion educational institutes in land adopt fashion shows employing fashion models. Modeling rather than flat pattern making realizes the majority of the complicated design works for the fashion shows. However, for the different measurements between the dress form and the real human model, problems often occur during the modeling and fitting processes. Researches on the standard dress form development representing professional fashion models' features are therefore in urgent need to enable the related apparel business and fashion institutes to make appropriate use of the dress form in their jobs. The study has been conducted as a preliminary study using a questionnaire method ultimately to develop the female dress form. A questionnaire in the research aimed at an investigation into the actual conditions of and satisfaction with the usage and the body measurements of existed dress forms. Approximately 30 fashion-related educational institutes and 10 apparel companies responded to the survey. Data derived from the survey was analyzed using SPSS version 10.1, the statistics tool. The results throughout the research were discussed in terms of largely three categories that are; (1) the general conditions of the usage of the dress form to prepare fashion shows: e.g. the frequency of holding the fashion show in an annual term, the proportion of professional and amateur models employed for the fashion show, the methods to construct garments, types and number of dress forms utilized and etc.; (2) factors considered to purchase the dress form e.g. its functionality, shapes, sizes, duration, price, A/S condition and etc.; and(3) satisfaction with the similarity between the dress form and the human body in the relation to the body measurements. Measurements in length wise, front and back waist lengths, neck to bust point on the dress forms were apparently differed from the ones of the actual body. In particular, differed torso length measurements cause the problem to have to alter the whole silhouette, consequently, the resultant patterns as well. In girth measurements, in order of bust and waist girths, the satisfaction was low.