• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2005.11a
• /
• pp.503-506
• /
• 2005

The PWR Nuclear Fuel assembly consists of more than 250 fuel rods that are supported by leaf springs in the cells of more than 10 Spacer Grids (SG) along the rod length. Since it is not easy to conduct mechanical tests on a full-scale model basis, the small-scaled rod bundle (5$\times$5) is generally used for various performance tests during the development stage. As one of the small-scaled tests, a flow test should be carried out in order to verify the performance of the spacer grid like the coolant mixing performance and to obtain the Flow-Induced Vibration (FIV) characteristics of the rod bundle over the specified flow range. A vibration test should be also performed to obtain the modal parameters of the bundle prior to the flow test. In this study, we want to develop the estimation procedure of the damping ratio for the small scaled test bundle. For the damping factor of the rod bundle and the grid case at the first vibration mode, as one of the vibration tests, a so-called pluck testing has been performed in air as a preliminary test prior to in-flow damping measurement test. Logarithmic decrement method is used for calculation of the damping ratio. Estimated damping ratio of the rod bundle is about 0.7% with reasonable error of 2% for the previous results. Nonlinear behavior of the rod bundle might be stem mainly Iron the rod-grid support configuration.

• Economic and Environmental Geology
• /
• v.32 no.6
• /
• pp.633-644
• /
• 1999

Gully pot is a part of urban darainage system to butter the runoff water fluxes from road to rivers and to minimize environmental pollution by prevending over the surrounding area. A series of studies have been carried out concerning the physicochemical characteristics of the sewage sludge sediments sttling down in such a gully pot in order to over to evaluate the contamination for heavy metals such as pb, Zn, Cu and Cd. The roadside soil and sewage sludge samples from gully pots were characterized by XRD analyses and sequential extraction : Zn 2595.7$\mu$g/g; Cd9.8$\mu$/g; Cu602.5$\mu$g/g; Pb260.0$\mu$g/g),because of a long-term accumulation of vehicle- and industrial-related pollutants. Mean Zn concentration in Yeouido (3873$\mu$g/g) and Junggu(3262$\mu$g/g)areas are 4-5 times higher than those in Dobonggu area, suggesting that Zn may be derived from automobile traffic (including the rubber of automobile tires). The mean concentrations of Cu and Cr are very significantly high in Junggu and Gurogu areas, possibly due to the industrial activities in these areas. The low Pb levels throughtotut the whole study areas in Seoul can be accounted for the use of unleaded gasoline since 1987. Sequential extraction experiments illustrate that a major part of Zn is bound to FII and FIII, representing about 88% of the total Zn concentration. Fraction IV, related to orgnic matter, is mostly significant for Cu accounting for 60% of the total Cu, and FII is next in importance. The main carriers of Pb are the fractions III, II and FIV, and in that order. The behavior of Cd is quite different from other elements (Zn, Cu, Pb), and most of the Cd is associated with FV. Changes in the physicochemical environments (such as acidification) may result in severe environmental pollution of surface water and rivers with respect to heavy metals (especially Zn and Cu).

• The Journal of the Acoustical Society of Korea
• /
• v.43 no.1
• /
• pp.122-130
• /
• 2024

Vibration of compressor in the air-conditioner outdoor unit have known to be main noise source radiated from outdoor unit. However, as the operating speed of compressor increase, the relative contribution of flow induced vibration and noise is also increase. In this paper, the numerical method was established to predict fluid-borne noise from compressor discharging pipe of air-conditioner outdoor unit. In this step, numerical result was compared to experimental one to verify numerical method. Additionally, the effects of pressure pulsation of compressor and compressor vibration into radiated noise were investigated in frequency domain. It was confirmed that the compressor vibration contributed to the low frequency band, while the pressure pulsation dose to the high frequency band.

• Nuclear Engineering and Technology
• /
• v.56 no.5
• /
• pp.1712-1724
• /
• 2024

Spiral tubes are used in a wide range of applications and it is significant to understand the vibration introduced by two-phase flow in spiral tubes. In this paper, the numerical method is used to study the vibration induced by the gas-liquid two-phase flow in a spiral tube with different flow regimes. The pressure fluctuation characteristics at the pipe wall and the solid vibration response characteristics are obtained. The results show that the motion of small bubbles in bubbly flow leads to small pressure fluctuations with low-frequency broadband (0-50 Hz). The motion of the gas plug in the plug flow causes small amplitude periodic pressure fluctuation with a shortened low-frequency broadband (0-15 Hz) compared to the bubbly flow. The motion of the gas slug in the slug flow causes large periodic fluctuations in pressure with a significant dominant frequency (6-7 Hz). The wavy flow is very stable and has a distinct main frequency (1-2 Hz). The vibration regime in the bubbly flow and wave flow are close to the first-order mode, and the vertical vibrating component is dominant. The plug flow and slug flow excite higher-order vibration modes, and the lateral vibration component plays more important part in the vibration response.

• Korean Journal of Environment and Ecology
• /
• v.30 no.4
• /
• pp.771-782
• /
• 2016

For basic information collection for the ecological management of forest vegetation in Korean island areas, forest vegetation between inhabited(Daemodo) and uninhabited(Gudo) island was classified in the Z-M phytosociological method and their ecological characteristics in terms of both floristic composition and structure analyzed. Forest vegetation of Daemodo and Gudo were divided into a total of 11 units and 8 units, respectively. Total cover and species diversity index(H') of forest vegetation showed significant differences between the two island, Daemodo has a high value in the tree layer, but, Gudo has a high value in the shrub layer. Composition of Life forms, Daemodo was N-$R_5-D_2$-e and Gudo MM-$R_5-D_2$-e. Family importance value(FIV), Daemdo has a high value in Theaceae(12.2) and Pinaceae(12.0) and Gudo in Lauraceae(16.5) and Fagaceae (11.6). The percentage of the total number of species in the family level, Daemodo is Asteraceae(4.5%) was the highest and Gudo is Liliaceae(7.3%). Indicator species of forest vegetation of the two islands, Daemodo is Nanophanerophytes(N) including Smilax china, Ligustrum japonicum and Eurya japonica was significant inicator species and Gudo is Megaphanerophytes(MM) including Dendropanax morbiferus, Castanopsis sieboldii and Actinodaphne lancifolia.

• Journal of Korea Soil Environment Society
• /
• v.2 no.1
• /
• pp.21-34
• /
• 1997

Retention ponds have been dug along some of the motorways in France to minimize environmental pollution by preventing pollutants from spreading over the surrounding area. A series of studies have been conducted to determine the physicochemical characteristics of the particles settling down in such a pond to evaluate the effectiveness of the pond as a trap for heavy metals such as Pb, Zn and Cd. The highly contaminated roadside soil and the uncontaminated background soil were also studied for comparison. The settling particles exhibited heavy metal concentrations of 2 to 8 times as much as the background Sologne soil, depending on the metal species. However, the heavy metal concentrations in the roadside soil were 7 to 26 times higher than those in the· settling particles. Sequential extraction experiments illustrated that the highly contaminated roadside soil consisted mainly of the readily soluble fractions (FII, FIII and FIV) for all three heavy metals, but little W which is hardly soluble. The proportion of W considerably increased up to one third of the total in the settling particles for Pb and Zn. This result as well as the large concentration differences between the roadside soil and the settling particles indicates that most of the heavy metals were lost to the surroundings even before reaching the retention pond. Cd exhibited somewhat different behavior in that the most soluble FI, which is negligible for Pb and Zn, occupied as much as one fourth of the total in the roadside soil. In addition, FV for Cd did not increase in the settling particles.

• Journal of Embryo Transfer
• /
• v.28 no.3
• /
• pp.169-175
• /
• 2013

Recently, the transgenic animal production technique is very important for the production of bio-parmaceutical as animal bio-reactor system. However, the absence of survival evaluation in vitro produced transgenic embryos has been a problem of the low productivity of transgenic animal because of absent of pre-estimate of pregnancy after transgenic embryos transferred into recipient. Therefore, this study is conducted to improve efficiency of transgenic cattle production by improving the non-surgical embryo transfer (ET) method. Transgenic bovine embryos were produced by injection of feline immunodeficiency virus enhanced green fluorescent protein (FIV-EGFP) lentiviral vector into perivitelline space of in vitro matured MII stage oocytes, and then in vitro fertilization (IVF) was occured. Normal IVF and EGFP expressing blastocysts were transferred into recipients. Results indicated that 2 expanded blastocysts (34.7%) transferred group showed significantly (P<0.05) higher pregnancy rate than 1 expanded blastocyst (26.8%) transferred group. In case of parity of recipient, ET to heifer (34.9%) showed significantly (P<0.05) higher pregnancy rate than ET to multiparous recipient (21.2%). However, there are no significant differences of pregnancy rate between natural induced estrus and artificial induced estrus groups. Significantly (P<0.05) higher pregnancy rate was obtained from recipient group which have normal corpus luteum with crown group (34.8%) than normal corpus luteum without crown (13.6%). Additionally, treatment of $100{\mu}g$ Gn-RH injection to recipient group (38.6%) 1 day before ET significantly (P<0.05) increase pregnancy rate than non- Gn-RH injection to recipient group (38.6%). We also transferred 2 EGFP expressing expanded blastocysts to each 19 recipients, 7 recipients were pregnant and finally 5 EGFP transgenic cattle were produced under described ET condition. Therefore, our result suggested that transfer of 2 good-quality expanded blastocysts to $100{\mu}g$ of Gn-RH injected recipient which have normal corpus luteum with crown is feasible to produce transgenic cattle.

• Journal of Embryo Transfer
• /
• v.28 no.3
• /
• pp.185-191
• /
• 2013

The purpose of this study is to improve production efficiency of vitrified-thawed transgenic bovine embryos. Transgenic bovine embryos were produced by injection of FIV-GFP lentiviral vector into perivitelline space of in vitro matured MII stage oocytes, and then in vitro fertilization. EGFP-expressing transgenic bovine blastocysts were cultured in serum-containing and serum-free medium. These blsatocysts were vitrified by pull and cut (PNC) container made with 0.25 cm plastic straw. Results indicate that total developmental rates of normal IVF embryo cultured in serum-containing and-free medium into blastocyst were not significantly different (22.3 vs 21.5%) and those of GFP-expressing transgenic bovine embryo into blastocyst showed no significant difference between serum-containing (13.9%) and-free medium (13.1%). However, developmental rate of GFP transgenic embryo was significantly (P<0.05) lower than its of normal IVF embryos. In additional study, we vitrified GFP transgenic normal bovine blastocysts using PNC vitrification method. Survival rate of vitrified-thawed GFP transgenic blastocyst (23.1%) was significantly (P<0.05) lower than its of normal blastocysts (68.9%). Although, survival rate of vitrified-thawed GFP transgenic blastocyst was lower than its of normal blastocyst, our result may suggested that PNC vitrification method is feasible to cryopreserve transgenic embryos. Our next plan will be the production of GFP express transgenic bovine derived from vitrified-thawed embryos using PNC method.

• Journal of the Society of Disaster Information
• /
• v.18 no.3
• /
• pp.550-559
• /
• 2022

Purpose: Pipes are widely used as applied devices in many industrial fields such as machinery, electronics, electricity, and plants, and are also widely used in safety-related fields such as firefighting and chemistry. With the diversification of products, the importance of technology in the piping field is also increasing. In particular, when changing the existing copper pipe to stainless steel, it is necessary to evaluate safety and flow characteristics through structural analysis or flow analysis. Method: This study investigated the safety by flow analysis of the 6.35 inch socket model, which are integrated insert type connectors developed by a company, using CFD analysis technique. For CDF analysis, RAN model and LES model are used. Result: As results of the analysis, amplitude of the pressure fluctuation acting on the wall of the piping system is formed at a level of 3,780 Pa or less, which is a very small level of pressure compared with the operating pressure or design stress of the refrigerant piping. Conclusion: These results mean that the effect of vibration caused by turbulence on the structural safety of the pipe is negligible.