• Proceedings of the Korea Concrete Institute Conference
• /
• 2009.05a
• /
• pp.67-68
• /
• 2009

This research aims at investigating the seismic behavior of RC bridge piers subjected to NFGM in low or moderate seismic region according to Volumetric Confinement Steel Ratio through the shaking table test unlike original way of the test. This investigation deal with the estimate with SARCF for shaking table test by the comparative analysis for the value of FFT.

• Journal of the Korean Society for Railway
• /
• v.9 no.1 s.32
• /
• pp.63-68
• /
• 2006

This paper proposes a fast Fourier transform(FFT)-based spectral analysis method(SAM) for the dynamic responses of the linear discrete dynamic models with non-proportional damping. The SAM was developed by using discrete Fourier transform(DFT)-theory. To verify the proposed SAM, a three-DOF system with non-proportional viscous damping is considered as an illustrative example. The present SAM is evaluated by comparing the dynamic responses obtained by SAM with those obtained by Runge-Kutta method.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2000.07a
• /
• pp.144-147
• /
• 2000

The effect of accelerated aging test on ethylene-propylene-diene monomer(EPDM) rubber used for outdoor insulation was studied by X-ray photoelectron spectroscopy(XPS), scanning electron microscope(SEM), FFT spectrum alalysis, and electrical pulse counts using PC by oscilloscope(300 MHz). In electrical alalysis, FFT spectrum analysis indicated arcing caused a significant increase in the third harmonic content of the leakage current of polluted insulator. Also, pulse counts increased as aging time. The surface oxygen and aluminum content were found to increase and that of carbon and nitrogen were found to decrease with time. The detailed XPS analysis indicated that the concentration of carbon in C-C decreased and concentration of highly oxidized carbons increased with time, which was due to the oxidation of EPDM rubber polymer SEM analysis indicated that crack and erosion of EPDM rubber occurred with time.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2005.10a
• /
• pp.409-414
• /
• 2005

In the literatures, the FFT-based SAM has been well applied to the computation of the steady-state responses of discrete dynamic systems. In this paper, a fast fourier transforms (FFT)-based spectral analysis method (SAM) is proposed fur the dynamic analysis of spectral element models subjected to the non-zero initial conditions. However, the FFT-based SAM has not yet been developed for the continuous systems represented by the spectral element model.

• Journal of the Institute of Convergence Signal Processing
• /
• v.13 no.4
• /
• pp.166-172
• /
• 2012

The standard wave height measurement system is usually based on spectrum analysis for measuring wave height. The spectrum analysis is complicated because of the FFT, and the FFT is not for real time processing since it requires the saved data segments. In this paper, we carried out the performance evaluation of real-time and simpler wave height measurement system using the kalman filter and inertial sensors. The kalman filter theory is complicated, but its algorithm is simpler than the FFT and the kalman filter is used to estimate wave height by integrating acceleration data. But the accumulated error is occurred when the acceleration data is integrated. We developed the algorithm using the wind wave characteristic to decrease the accumulated error. In this paper, the performance evaluation of the wave height measurement system is carried out for various wind wave conditions. Through the experiments, we verified that it shows high measurement performance with the 3.5% margin of error in wind wave condition.

• Proceedings of the Korean Society of Tribologists and Lubrication Engineers Conference
• /
• 2003.11a
• /
• pp.384-387
• /
• 2003

The object of the present work is the analysis of head/disk interaction during start/stop and constant speed operation using acoustic emission (AE). The frequency spectrum analysis is performed using the AE signal obtained during the head/disk interaction. The FFT (Fast Fourier Transform) analysis of the AE signals is used to understand the interaction between the AE signal and the state of contact.

• Journal of Electrical Engineering and Technology
• /
• v.11 no.5
• /
• pp.1235-1241
• /
• 2016

• Journal of Communications and Networks
• /
• v.8 no.1
• /
• pp.38-48
• /
• 2006

A synchronous multicarrier (MC) code-division multiple access (CDMA) system using inverse fast Fourier transform (IFFT) and fast Fourier transform (FFT) for the downlink mobile communication system operating in a frequency selective Rayleigh fading channel is analyzed. Both carrier frequency offset and timing offset are considered in the analysis. Bit error rate performance of the system with both equal gain combining and maximum ratio combining are obtained. The performance is compared to that of the conventional system using correlation receiver. It is shown that when subcarrier number is large, the system using IFFT/FFT has nearly the same performance as the conventional one, while when the sub carrier number is small, the system using IFFT/FFT will suffer slightly worse performance in the presence of carrier frequency offset.

• Proceedings of the IEEK Conference
• /
• 2008.06a
• /
• pp.429-430
• /
• 2008

FFT(Fast Fourier Transform)는 멀티미디어 통신 및 디지털 신호처리 분야, 특히 무선통신이나 디지털 방송 등에서 쓰이는 OFDM(Orthogonal Frequency Division Multiplexing)에서 필수적인 역할을 하고 있다. 본 논문에서는 파이프라인 FFT 프로세서 설계의 다양한 알고리즘 및 하드웨어 구조에 대해 살펴보고 이를 한 눈에 파악할 수 있는 설계 가이드라인을 제시한다. 또한 분석 중 Radix-2 Single-path Delay Feedback의 복소곱셈기의 비효율적인 면을 찾고 새로운 R2SDF 구조를 제안한다.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.18 no.11
• /
• pp.1754-1766
• /
• 1993

The application of VXIbus system, an Industry standard, is rapidly spreading with its ability to offer the easiness of integration from GPIB and the fast data transmission from VMEbus system. Compared with VXIbus Register Based Device, VXIbus Message Based Device has a drawback In the aspect of speed. But it is possible to utilize high level ASCII commands to control a Message Based Device, therefore system integration is much easier with Message Based Device than with Register Based Device. And, the FFT analyzer is an instrument for signal analysis which can be inexpensively implemented to be fast and have high resolution. Its wide ability of analysis presents numerous application. So, it is necessary to apply VXIbus system to FFT analyzer. In this paper, the implementation of FFT analyzer is performed using a DSP module and by implementing all A/D conversion circuit and a control module which performs VXIbus interface. The device can be controlled by Slot0 Commender which supports VXIbus Shared Memory Protocol through VXIbus.