• Explosives and Blasting
• /
• v.18 no.2
• /
• pp.14-22
• /
• 2000

The estimation of proper prediction method and the alteration of transformation method of environmental regulation standard were carried out by measuring blasting noise in construction field. The correlation of scaled distance with sound pressure level were better than with sound level, but it was proved to be difficult to control blasting noise because the correlation factor was too 1ow. three methods to transform sound pressure levee to sound level were examined. The method is the transformation by correlation equation of sound pressure level and sound level which are measured at the same time, and simplified transformation of A-weighting network corresponding to dominant frequency, and the transformation of sound pressure level by FFT. There were many errors to transform. The best effective method is the transformation using correlation equation of sound pressure level and sound level which are measured at the same time.

• Journal of the Korean Society for Nondestructive Testing
• /
• v.21 no.4
• /
• pp.439-445
• /
• 2001

The destructive method is reliable and widely used lot the estimation of material degradation but, it have time-consuming and a great difficulty in preparing specimens from in-service industrial facilities. Therefore, the estimation of degraded structural materials used at high temperature by nondestructive evaluation such as electric resistance method, replica method, Barkhausen noise method, electro-chemical method and ultrasonic method are strongly desired. Ultrasonic nondestructive evaluation technique has been reported good to attain efficiency of measurement, high sensitivity of measurement, and rapidity and reliability of result interpretation. In this study, it was verified experimentally the feasibility of the evaluation of degraded 2.25Cr-1Mo steel specimens which were prepared by the isothermal aging heat treatment at $630^{\circ}C$ by high frequency longitudinal wave method investigating the change of attenuation coefficient by FFT analysis and wavelet transform. Because of carbide precipitation increase and spheroidization near grain boundary of microstructure to aging degradation, attenuation coefficient had a tendency to increase as degradation proceeded. It was identified possibly to evaluate degradation using the characteristics of high-frequency ultrasonics. Frequency dependence of ultrasonic attenuation coefficient to aging degradation appeared large, which made sure that attenuation coefficient is an important parameter for evaluation of aging degradation.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2014.10a
• /
• pp.288-291
• /
• 2014

MRE(Magneto-rheological Elastomer) is a material which shows reversible and various modulus in magnetic field. Comparing to conventional rubber vibration isolator, MREs are able to absorb broader frequency range of vibration. These characteristic phenomena result from the orientation of magnetic particle (i.e., chain-like formation) in rubber matrix. In this study, Silicon was used as a matrix in order to manufacture MREs. Magnetic reactive powder(MRP), having rapid magnetic reaction, was selected as a magnetic particle to give magnetic field reactive modulus. The mechanical properties of manufactured MREs were measured with the application of magnetic field. The analysis of MR effect was carried out by FFT analyzer with various induced magnetic field. As the addition of CIP and induced magnetic field intensity increased, increment of MR effect was observed.

• Proceedings of the KIEE Conference
• /
• 2009.07a
• /
• pp.1903_1904
• /
• 2009

본 논문은 퍼지 RBF 뉴럴네트워크를 이용한 트랙킹 검출 방법을 제시한다. IEC 60112에서 규정한 실험 장치와 방법에 따라 실험을 수행하였다. NI 장비를 사용하여 전류 파형을 측정하고, 측정된 전류 파형으로부터 FFT, 웨이블렛등의 신호처리 기법을 사용하여 12개의 특징점을 추출한다. 추출된 특징점들을 퍼지 RBF 뉴럴네트워크의 입력으로 사용하여 트랙킹 발생 유무를 검출한다. 퍼지 RBF 뉴럴네트워크는 WLSE를 사용하여 학습하고, HFC-PGA를 이용하여 특징점들의 선택, 퍼지 규칙의 수, 후반부 다항식 차수, 퍼지화 계수등을 최적화 하였다.

• Tribology and Lubricants
• /
• v.14 no.1
• /
• pp.14-22
• /
• 1998

This paper describes the effects of exciting frequency on the stiffness and damping coefticients of a 5-pad tilting pad journal bearing, LOP (load on pad) type. The stiffness and damping coefficients are investigated experimentally under the different values of exciting frequency, bearing load and shaft speed. These coefficients are estimated by measuring the response of the relative displacement between the bearing and the shaft and acceleration of the bearing due to the known exciting loads acting on the bearing. In order to analysis the response of exciting load, displacement and acceleration, a FFT analyzer is used. It is shown that the variation of exciting frequency has a little effect on both the stiffness and damping coefficients. Both the stiffness and damping coefficients in the loading direction are decreased by the increase of shaft speed but increased by the increase of bearing load.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.219-220
• /
• 2008

이 논문은 이산푸리에변환을 이용하여 시계열데이터에 포함되어 있는 파라미터를 추정하는 새로운 방법과 그 응용 결과를 기술하고 있다. 제안한 방법은 푸리에스펙트럼으로부터 직접 파라미터를 추정하는 방법으로 FFT의 장점을 이용할 수 있으므로 신호에 포함되어 있는 중요 주파수를 비롯한 저주파 진동 파라미터를 빠르게 추정할 수 있다. 이 논문에서는 단순한 산술계산만 수행하여 제동계수를 추정할 수 있도록 알고리즘을 단순화하였다. 그리고 WSCC 계통에서 실측한 데이터에 제안한 알고리즘을 적용하여 효율성을 검증하였다.

• Journal of KSNVE
• /
• v.7 no.2
• /
• pp.331-345
• /
• 1997

A theoretical formulation for the analysis of free vibration of clamped-free cylindrical shells with plates attached at arbitrary axial position(s) was completed and it was programed to get the numerical results which yield natural frequencies and mode shape of the combined system of the plate and the shells. The frequencies and mode shapes from theoretical calculation were compared with those of commercial finite element code, ANSYS. In order to validate the theory, modal test was also performed by impact test and FFT analysis. The results shows good agreement with those of ANSYS and test results in frequencies and mode shapes. The method developed herein is likely to be used for the analysis of the free vibration of the clamped-free circular cylindrical shells with any kinds of lids such as hollow circular plates, conical shells, spherical shells, or semi-spherical shells.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.26 no.11C
• /
• pp.133-139
• /
• 2001

The economical detection of dual-tone multi-frequency(DTMF) signals is an important factor when developing cost-effective telecommunication equipment. Each channel has independently a DTMF receiver, and it informs the detected signal to processors. In order to detect the DTMF signals, this paper analyze the power spectra of the DTMF receiver by using the QFT algorithm. As experimental result, by analyzing 2$\^$M/ real data in terms of ITU-T specification, it show that the QFT algorithm improve the performance of the DTMF receiver and can save memory waste and can the real-time processing.

• Proceedings of the Korea Multimedia Society Conference
• /
• 2004.05a
• /
• pp.179-182
• /
• 2004

무선통신분야에서 LMS5(Least Mean Square) 알고리즘은 식이 간단하고 계산량이 비교적 적기 때문에 널리 사용되고 있다. 그러나 시간영역에서 처리할 경우 입력신호의 고유치 변동폭이 넓게 분포되어 수렴속도가 저하하는 문제점이 있다. 이를 해결하기 위하여 신호를 FFT(Fast Fourier Trasnform)나 DCT(Discrete Cosine Transform)로 변환하여 신호간의 상관도를 제거함으로써 시간영역에서 LMS알고리즘을 적용할 때 보다 수렴속도를 크게 향강시킬 수 있다. 본 논문에서는 수렴속도 향상을 위해 시간영역의 적응 알고리즘을 직교변환인 고속웨이브렛(wavelet)변환을 이용하여 변환영역에서 수행하며, 짧은 필터계수를 가지는 DWT(Discrete Wavelet Transform)특성에 맞는 Fast running FIR 알고리즘을 이용하여 WTLMS(Wavelet Transform LMS)적응알고리즘을 통신시스템에 적용한다. 적응 알고리즘의 성능향상을 위하여 시간에 따라 적응상수의 크기를 가변시켜 수렴 초기에는 큰 적응상수로 따른 수렴이 가능하도록 하고 점차 적응상수의 크기를 줄여서 misadjustment도 줄이는 방법의 적응 알고리즘을 제안하였다. 제안한 알고리즘을 실제로 적응잡음제거기(adaptive noise canceler)에 적용하여 컴퓨터 시뮬레이션을 하였으며, 각 알고리즘들의 계산량, 수렴속도를 이용하여 각각 비교, 분서하여 그 성능이 우수함을 입증하였다.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.46 no.8
• /
• pp.18-21
• /
• 2009

In the digital system, ROM has a large power-consumption and a speed-bottleneck. According to gradual growth of system speed, ROM is demanded to have low-power consumption and high-speed operation design. The ROM adapted in FFT or FIR filter needs method of sequential accessed addressing. We proposed a reduction method for the number of storage cells in this paper. The number of storage cells which is connected with bi-line is reduced by the proposed method so that the capacitance value of bit-time is reduced. In this case, delay time, and power consumption are reduced. Design result of ROM in this paper using the proposed method could reduce up to 86.3% of storage cell '1' compare with conventional method.