• 한국산학기술학회논문지
• /
• 제15권10호
• /
• pp.5950-5954
• /
• 2014

본 논문의 목적은 설계 변경된 세척기의 유한요소해석에 있으며 세척 성능을 향상시킨 세척기 개발을 위하여 기존 세척기의 구조를 변경하여 설계하였다. 설계 시 프로그램은 CATIA V5를 사용하였으며 유한요소해석에 필요한 모델링 또한 CATIA V5를 사용하였다. 모델링된 세척기에 대하여 3차원 유한요소해석 프로그램인 ANSYS를 사용하여 해석을 수행하였으며 안정성을 검증하기 위하여 내부압력의 변화에 따른 유체의 흐름을 구하였다. 이러한 해석결과는 새로운 모델의 세척기를 개발하는데 활용되었다.

• 소성∙가공
• /
• 제4권3호
• /
• pp.267-281
• /
• 1995

Preform design is one of the critical fields in metal forming. The finite element method(FEM) has been effective in designing preforms and process sequence, for which the backward tracing scheme of the rigid-plastic FEM has been explored. In this work a program using the backward tracing scheme by the rigid-plastic FEM is developed for three-dimensional plastic deformation, which is an extension of the scheme from two-dimensional cases. The calculation of friction between workpiece and die, and handling of boundary conditions during backward tracing require sophisticated treatment. The developed program is applied to upsetting of a rectangular block and to side pressing of a cylindrical workpiece. The results of the two applications show feasibility of the program on three-dimensional plastic deformation.

• 대한기계학회논문집A
• /
• 제27권3호
• /
• pp.401-408
• /
• 2003

A CAD program for metal bellows diaphragm was developed in this study. This program was written in AutoLISP on the AutoCAD system with a personal computer. Basic design concept used in this program is composition of a convolution that is tangent to two lines and 5 circles from given design parameters(initial radius, inner and outer diameter, thickness, pitch, etc.). The effects of altering some design parameters on stress distribution and fatigue life of bellows were estimated using commercial FEM code, NISAII. As a result, the metal bellows diaphragm was successfully designed by the CAD program. It is used to model a bellows geometry in pre-processor of FEM code. The FEM result shows that stress is dependent on straight line length, bellows diameter with same span, and fatigue life is also affected by design parameters.

• 한국윤활학회:학술대회논문집
• /
• 한국윤활학회 1999년도 제29회 춘계학술대회
• /
• pp.73-79
• /
• 1999

Finite element equations by using fast Fourier transformation were formulated for studying temperatures resulting from frictional heating in sliding systems. The equations include the effect of velocity of moving components. The program developed by using FFT-FEM that combines Fourier transform techniques and the finite element method, was applied to the sliding bearing system. Numerical prediction obtained by FFT-FEM was in an excellent agreement of experimental temperature measurements.

• Tribology and Lubricants
• /
• 제16권3호
• /
• pp.218-222
• /
• 2000

Finite element equations by using fast Fourier transformation were formulated for studying temperatures resulting from frictional heating in sliding systems. The equations include the effect of velocity of moving components. The program developed by using FFT-FEM that combines Fourier transform techniques and the finite element method, was applied to the sliding bearing system. Numerical prediction obtained by FFT-FEM was in an excellent agreement of experimental temperature measurements.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 추계학술대회 논문집 학회본부 A
• /
• pp.21-23
• /
• 1999

In this paper, the analysis of the electric field in the chamber of high voltage $SF_6$ GCB(Gas Circuit Breaker) is presented by using C-1 FEM. For this purpose, pre-processing program and post-processing program were developed for axisymmetirc 3 dimensional analysis and the electric field in cylindric chamber was analyzed. Important problem is that electric analysis must be considered coronal due to break-down of $SF_6$ when it is cutted off. To solve this problem, a procedure is needed to verify that the solution of Poisson's equation for scalar potential satisfy charge continuos condition because of using first order element os not satisfy the electric continuous condition, C-1 FEM is introduce to obtain electirc potential and electric field at the same time. Analysis of the distribution of electric field on model was done. It is confirmed that the developed program in this paper applicable to design and to analyze of characteristics in total program as electric characteristics analysis routine.

• 한국기계연구소 소보
• /
• 통권17호
• /
• pp.29-38
• /
• 1987

A mechanical linkage system to measure the operating temperature of the piston is developed and installed to the engine. Actual temperature distribution is measured for comparison with the numerical results. Heat transfer at the piston is analyzed using an FEM program. Thermal boundary condition of piston surface is determined by analytical and empirical methods. The temperature distribution and the thermal deformation are obtained by the FEM program.

• 한국농업기계학회:학술대회논문집
• /
• 한국농업기계학회 1993년도 Proceedings of International Conference for Agricultural Machinery and Process Engineering
• /
• pp.1063-1072
• /
• 1993

Current finite element analysis programs for soil cutting process with tillage tools require mainframe computers. Several special treatments in developing a microcomputer FEM program were introduced to increase the capacity for solving large problems and reducing the total time cost. The program was evaluated by solving one 3-D example on a 489 microcomputer. The results showed a close agreement with the laboratory soil bin test.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 1994년도 추계학술대회 논문집
• /
• pp.80-94
• /
• 1994

As for axisymmetirc sheet metal forming, a kind of pick-up apparatus for body-wrinkling is deviced. Experiments with both hemispherical and flat headed punches, with various clearances between punch and die, with respect to three kinds of materials each of which has two thicknesses, are performed. Firstly the process of evolution of body-wrinkling is observed. Then the critical blank-holding force (or meridional tensile force) for suppression of body-wrinkling at a specified punch-stroke is measured for all cases mentioned above. An empirical formula for it is proposed. Deformation patterns and stress distributions are analysed by the use of FEM. A simplified critical condition for body-wrinkling is formulated and introduced into the FEM program. And its effectiveness is checked by comparison with the experimental results. Using this FEM system, the governing factors of body-wrinkling are cleared up.

• 한국도로학회논문집
• /
• 제10권3호
• /
• pp.129-138
• /
• 2008

기존 콘크리트 포장의 단면 설계 시 발생하는 문제점을 해결하기 위해 유한 요소법(FEM)을 이용하여 것이 하나의 방법론으로 부각되었으며 현재 한국형 포장 설계법 개발 연구에서도 적용 중에 있다. 본 연구에서는 ABAQUS와 포트란 해석 프로그램을 이용하여 콘크리트 포장의 한계 응력을 계산하였고, 그 결과를 뉴럴 네트워크와 선형 회귀식을 이용하여 비교 분석하였다. 입력 변수가 많지만 다양한 해석을 하지 못하는 경우(입력변수 6개에 대해 81 경우 수 해석)에 대해 구조해석 결과를 뉴럴 네트워크(이하 NN: Neural Networks)와 선형 회귀식으로 비교한 결과, 구조해석 결과와 다소 차이가 있음을 확인하였다. 반면 입력 변수를 줄이되 다양한 경우에 해석한 경우(입력 변수 3개에 대해 343 경우의 수)의 분석 결과, NN과 선형 회귀식이 구조해석 결과와 매우 유사한 결과가 나타나는 것을 알 수 있었다. 하지만 그래프의 (0,0), (1,1) 부분에서 NN이 선형 회귀식에 비해 더 정확한 것을 확인하였다. 이와 같은 연구 결과를 통해서 한국형 포장 설계법의 핵심인 응력 계산 모듈을 선형 회귀식보다 좀 더 정확한 NN으로 해석하는 것을 제안하였다.