• Progress in Superconductivity
• /
• 제13권3호
• /
• pp.195-202
• /
• 2012

In this paper, we designed Active Magnetic Bearing (AMB) for large scale Superconductor Flywheel Energy Storage System (SFESS) and PD controller for AMB. And we experimentally evaluated SFESS including hybrid type AMB. The radial AMB was designed to provide force slew rate that was sufficient for the unbalance disturbances at the maximum operating speed. The thrust AMB is a hybrid type where a permanent magnet carries the weight of the flywheel and an electromagnetic actuator generates the dynamic control force. We evaluated the design performance of the manufactured AMB through comparison of FEM analysis and the results of experimental force measurement. In order to obtain gains of PD controller and design a notch filter, the system identification was performed through measuring frequency response including dynamics for the AMBs, a power amp and a sensor using a sine swept test method after levitating the flywheel. Through measuring the current input of the AMBs and the orbit of a flywheel according to rotational speed, we verified excellent control performance of the AMBs with small amount current for the large scale SFESS.

• 전기전자학회논문지
• /
• 제22권3호
• /
• pp.759-766
• /
• 2018

This paper presents a high-speed axial-flux machine which utilizes the idea of sinusoidal shaped pole combined with a consequent iron-pole. The target of the proposed machine is the cost reduction of the relatively expensive Samarium-Cobalt (SmCo) permanent magnet (PM) material and the torque per PM volume improvement by using sinusoidal consequent-pole rotor. The effectiveness of the proposed machine is validated by comparing it with conventional consequent-pole and with conventional PM machines using 3-D finite element method (FEM) simulations. The comparison and analysis is done in terms of back electro-motive force (back-EMF) harmonic contents, torque per PM volume and torque ripple characteristics. The simulation results show that the proposed machine is suitable and cost-effective for high-speed and high torque per PM volume applications. Furthermore, due to the consequent pole, the magnetic flux saturation and the overload current torque-capability are also presented and discussed in the paper.

• Journal of Electrical Engineering and Technology
• /
• 제8권3호
• /
• pp.565-571
• /
• 2013

This paper presents an effective method to improve efficiency of switched reluctance motor by optimizing energy conversion loop. A nonlinear analytical model which takes saturation account is developed to calculate inductance and flux-linkage. The flux-linkage curve is studied to calculate the co-energy increment to obtain the optimum exciting current. For a given cross-section, the exciting current at which co-energy increment is maximum was found to be constant while stack length varies. Then the energy conversion loop was optimized by varying the stack length and turns of windings. The constraints during optimization were that motor was excited by the maximum increment co-energy current and the energy in the loop was determined by rated power of motor. Dynamic finite element analysis was used to evaluate the efficiency of various models and the comparison of results shows promising effects of the proposed method. Experiment was also conducted to validate the simulation result.

• 한국기계가공학회지
• /
• 제19권1호
• /
• pp.43-48
• /
• 2020

At present, 24 nuclear power plants are in operation nationwide as the main power source responsible for about 27% of Korea's electricity, and five nuclear power plants are currently under construction. Issues of nuclear safety and reliability have always existed, but after the Fukushima accident, ensuring reliability has become an even more important issue for safety. Compared to other kinds of accidents, the initial response after a nuclear accident is more important than any other accident. Prior to accidents, it is important to be able to predict and judge the accident in advance for the sake of prevention. In this research, non-destructive inspection methods for existing pipe welds include radiographic, ultrasonic, magnetic particle practice, and liquid penetration testing. For this experiment, carbon steel pipes like that of the material used in nuclear pipes were adopted, and specimen welded to the flange (Flange) were manufactured. After testing, the weld specimen were not damaged through the infrared thermography (IRT) experiment. This study attempted to improve the safety of carbon steel pipes through a comparative analysis of finite element analysis.

• Steel and Composite Structures
• /
• 제36권5호
• /
• pp.587-602
• /
• 2020

In recent years, the composite columns have been widely used in the structures. These columns are mainly used to construct the structures with a large span and high floor height. Concrete filled tubes (CFTs) are a type of composite column, which are popular nowadays due to their numerous benefits. The purpose of this study is to investigate such frames at elevated temperatures. The method used in this research is based on section 2.2 of Eurocode 4. First, for the verification purpose, a comparison was made between the experimental results and the numerical model of the concrete filled tube. Then a composite frame was analyzed under fire temperature with different parameters. The results showed that the failure time decreased with increasing the friction of different models. Moreover, investigation of the concrete moisture content revealed that an increase in the concrete moisture content from 3% to 10% led to extended failure time for different models. For instance, in the second frame model, the failure time has increased up to 8%.

• The Journal of Asian Finance, Economics and Business
• /
• 제7권9호
• /
• pp.251-261
• /
• 2020

The paper examines the role of some determinants of economics, politics and institutions on the budget deficit volatility in some countries of the Association of South East Asian Nations (ASEAN) such as Indonesia, Thailand and Vietnam. The paper uses the fixed effects model (FEM) and the random effects model (REM) to investigate panel data of these countries in the period of 1990-2018. Moreover, the study also explores ordinary least square (OLS) to analyze time-series data for each country in the same period to make comparison among them. The economic data is collected from international financial statistics and world development indicators. The data on political variables are collected from International Country Risk Data Guide (ICRG). The empirical results both confirm that corruption and political stability are important indicators of budget deficit. Besides, the paper suggests authorities should pay more attention on improving the institutional setup of the economy in order to avoid high and unstable deficit. The findings offer new insight on the budget deficit in essence and suggest that the most important thing need to be done ahead is to strongly implement anti-corruption actions. By doing so, the status of budget deficit would be remarkably improved immediately.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2000년도 추계학술대회논문집A
• /
• pp.363-369
• /
• 2000

Due to environmental problem for reduction in fuel consumption, vehicle emission and etc., many automotive makers are trying to reduce the weight of the vehicle. The most effective way to reduce the weight of vehicle is to use lighter materials, aluminum, plastics. Aluminum Space Frame has many advantages in weight reduction, body stiffness, ease of model change and so on. So, most of automotive manufacturers are attempting to develope Aluminum Space Frame body. For these reasons, we have developed Aluminum Intensive Vehicle based on steel monocoque body with Hyundai Motor Company. We achieved about 30% weight reduction, the stiffness of our model was higher than that of conventional steel monocoque body. In this paper, with optimization using FEM analysis, we could get more weight reduction and body stiffness increase. In the long run, we analyzed by means of simulation using PAM-CRASH to evaluate crush and crash characteristic of Aluminum Intensive Vehicle in comparison to steel monocoque automotive.

• 한국해양환경ㆍ에너지학회지
• /
• 제5권3호
• /
• pp.35-44
• /
• 2002

계류된 사각형 부유식 방파제의 파랑제어성능에 대한 해석적인 연구를 수행하였다. 고유함수 전개법을 사용하여 사자형 부유식 방파제의 운동특성과 투과율을 살펴보았다. 계류삭의 강성계수는 선형 탄성스프링으로 가정하였다. 고유함수전개법을 사용한 해석결과는 유한요소법을 사용한 수피계산결과와 전 주파수에 걸쳐 잘 일치함을 보여주었다. 사각형 부유식 방파제의 단면형상과 계류삭의 특성 능과 간은 중요한 선계변수들과 입사파의 파장을 바꿔가면서 파랑 제어성능을 살펴보았다. 그 결과 적절히 설계된 부유식 방파제는 효과적인 파랑제어구조물로 활용이 가능하다는 결론을 얻을 수 있었다.

• 한국항공우주학회지
• /
• 제40권7호
• /
• pp.564-573
• /
• 2012

새롭게 제안된 공력 설계 절차와 In-house 프로그램을 이용하여 1 MW급 수평축풍력 터빈 블레이드의 형상을 결정하였고, 기존에 개발된 블레이드의 실험 결과와 본 연구에서 제안한 블레이드와의 비교를 통하여 공력 설계에 대한 타당성을 제시하였다. 블레이드의 구조 설계는 Netting Rule과 Rule of Mixture를 적용하여 설계를 진행하였다. 설계된 블레이드의 구조적 안전성은 상업적 유한요소프로그램인 MSC.NASTRAN을 사용하여 다양한 하중에 따라 선형 정적해석, 변형해석, 좌굴해석, 진동모드해석 등을 수행하였다. 최종적으로 Spera가 제시한 실험식을 적용하여 요구된 피로수명에 대해 타당성을 확인하였다.

• 대한의용생체공학회:학술대회논문집
• /
• 대한의용생체공학회 1997년도 추계학술대회
• /
• pp.263-266
• /
• 1997

Three dimensional numerical model based on the finite element method(FEM) were developed to predict the mechanical behavior of hip implants. The purpose of this study is to investigate the stress distribution of two types of cementless total hip replacement femoral component -a straight stem and a curved stem, and to compare their effect on the stress shielding between two types by three dimensional finite element method. The authors analyzed von Mises stress in the cortex & stem and compared the stress between the straight and the curved stem. In comparison of stresses between two different design of femoral stem, there was 25% more decrease of stress in straight stem than curved stem in the medial cortex at proximal region. The straight stem had consistently much lower stresses than the curved stem throughout the whole medial cortex with maximum 70% reduction of stress. However, there was little change in stress between nature and 2 implanted femur throughout the lateral cortex. Stress of femoral stem was much higher in the straight stem than the curved stem up to 60%. The straight stem had more chance of stress shielding and a risk of fatigue fracture of the stem compared with the curved stem in noncement hip arthroplasty. In design of femoral stem still we have to consider to develop design to distribute more even stress on the proximal medial cortex.