DOI QR코드

DOI QR Code

Optimization of Energy Conversion Loop in Switched Reluctance Motor for Efficiency Improvement

  • Li, Jian (State Key Laboratory of Advanced Electromagnetic Engineering and Technology, Huazhong University of Science and Technology) ;
  • Qu, Ronghai (State Key Laboratory of Advanced Electromagnetic Engineering and Technology, Huazhong University of Science and Technology) ;
  • Chen, Zhichu (State Key Laboratory of Advanced Electromagnetic Engineering and Technology, Huazhong University of Science and Technology) ;
  • Cho, Yun-Hyun (Dept. of Electrical Engineering, Dong-A Univerity)
  • Received : 2011.04.05
  • Accepted : 2012.12.26
  • Published : 2013.05.01

Abstract

This paper presents an effective method to improve efficiency of switched reluctance motor by optimizing energy conversion loop. A nonlinear analytical model which takes saturation account is developed to calculate inductance and flux-linkage. The flux-linkage curve is studied to calculate the co-energy increment to obtain the optimum exciting current. For a given cross-section, the exciting current at which co-energy increment is maximum was found to be constant while stack length varies. Then the energy conversion loop was optimized by varying the stack length and turns of windings. The constraints during optimization were that motor was excited by the maximum increment co-energy current and the energy in the loop was determined by rated power of motor. Dynamic finite element analysis was used to evaluate the efficiency of various models and the comparison of results shows promising effects of the proposed method. Experiment was also conducted to validate the simulation result.

Keywords

References

  1. M. N. Anwar, I. Husain, A. V. Radun, A Comprehensive Design Methodology for Switched Reluctance Machines, IEEE Trans. Ind. Electron., 37 (2001) 1864-1892.
  2. Y. Hayashi, T. J. E. Miller, A New Approach to Calculating Core Losses in the SRM, IEEE Trans. on Ind. Appl., 31 (1995) 1039-1046. https://doi.org/10.1109/28.464517
  3. R. Krishnan, Switched Reluctance Motor Drives: Modeling, Simulation, Analysis, Design, and Applications. CRC, Boca Raton, 2001, pp. 79-120.
  4. S. H. Mao, M. C. Tsai, An analysis of the optimum operating point for a switched reluctance motor, Journal of Magnetism and Magnetic Materials, 282 (2004) 53-56. https://doi.org/10.1016/j.jmmm.2004.04.012
  5. P. N. Materu, R. Krishnan, Estimation of Switched Reluctance Motor Losses, IEEE Trans. Ind. Appl., 28 (1992) 668-679. https://doi.org/10.1109/28.137456
  6. T. J. E. Miller, Optimal Design of Switched Reluctance Motors, IEEE Trans. Ind. Electron., 49 (2002) 15-27.
  7. A. V. Radun, Design Considerations for the Switched Reluctance Motor, IEEE Trans. Ind. Appl., 31 (1995) 1079-1087. https://doi.org/10.1109/28.464522
  8. N. K. Sheth, K. R. Rajagopal, Calculation of the flux- Linkage characteristics of a switched reluctance motor by flux tube method, IEEE Trans. Magn., 41 (2005) 4069- 4071. https://doi.org/10.1109/TMAG.2005.854865
  9. P. Vijayraghavan, PhD dissertation, Design of Switched Reluctance Motors and Development of a Universal Controller for Switched Reluctance and Permanent Magnet Brushless DC Motor Drives, Virginia Polytechnic Institute and State University, Virginia, 2001.
  10. $FLUX_{(R)}$ 8.10 2D Application New features, Credat, France,2003, pp. 63-70.

Cited by

  1. A comprehensive review on energy efficiency enhancement initiatives in centrifugal pumping system vol.181, 2016, https://doi.org/10.1016/j.apenergy.2016.08.070
  2. Investigation study of geometric dimensions of the magnetic system of the switched-reluctance machine influence on magnetic moment vol.313, pp.1757-899X, 2018, https://doi.org/10.1088/1757-899X/313/1/012009