• Proceedings of the Korean Society for Agricultural Machinery Conference
• /
• 2000.11a
• /
• pp.31-75
• /
• 2000

The tractor is the most important machine for farming keeping probably this position also for feeding the future fast growing world population. Band width of power and functions continues to increase worldwide, examples are given. Regarding the high developed countries, general farming demands as well as precision farming issues require closed loop control principles for the system "driver-tractor-implement". Progress in information technologies supports this trend, but comprehensive component and system developments are necessary to make the tractor ready for automatic or semi-automatic controls. The following technical highlights are, for example, discussed for Europe: hydropneumatic front axle suspensions, 50 km/h top speed, front brakes, electronically controlled multivalve diesel engines, automatic hydrostatic power split CVTs, load sensing hydraulics with proportional valves, improved cab and working places with "operations by wire" and more electronics on board than ever before.

• Journal of Chest Surgery
• /
• v.21 no.6
• /
• pp.1084-1094
• /
• 1988

Conservative management of 3 iatrogenic perforations of intrathoracic esophagus was reviewed. The primary disorders were achalasia in 2 patients and congenital tracheoesophageal fistula in 1 patient. Perforation occurred after treatment of the primary disorders in the distal esophagus in 2 patients and mid-thoracic esophagus in 1 patient. All the perforations appeared late after the previous treatments and the inflammation spread to mediastinum and pleural cavity in all the 3 patients. Conservative management of esophageal perforation was carried out with intraluminal drainage from the perforated site of esophagus[insertion of Levin`s tube and continuous suction], pleural drainage and feeding of liquid diet through gastrostomy tube with Fowler`s position. The patients revealed spontaneous closure of perforated sites about 3 to 4 weeks after this conservative management without open thoracotomy. This result suggests that this conservative management may be accepted as therapeutic method in the thoracic esophageal perforations regardless of cause and time of the perforation.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.32 no.8
• /
• pp.701-706
• /
• 2008

A continuous 3D tube bending machine has been developed for industrial boiler panel production. The machine consists of a main bender, a sub bender, a side bender, tube feeding rollers and control system that includes data management system. Tube position is controlled by a numerical control system. The bending former can be easily replaced according to the shape of bending form. Reduction of working time and improvement of production capacity from the practice have been achieved by bending a long tube in the machine developed.

• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.26 no.2
• /
• pp.53-57
• /
• 2016

6H-SiC single crystals were grown by using a resistance heating system. It was recognized that the growth behavior was different according to the different growth temperatures. It was revealed that the temperatures at the source feeding and at the crystal growth position had to be controlled independently. In this report, the effect of growth temperature on the SiC crystal growth was discussed.

• 유체기계공업학회:학술대회논문집
• /
• 2006.08a
• /
• pp.551-554
• /
• 2006

Inhibition of propellant temperature rising in liquid propulsion rocket using cryogenic fluid as a propellant is very important. Especially propellant temperature rising during stand-by after filling and pre-pressurization can bring into cavitation in turbo-pump. One of the method preventing propellant temperature rising in cryogenic feeding system is recirculating propellant through the loop composed of propellant tank, feed pipe, and recirculation pipe. The circulation of propellant is promoted through gas-lift effect by gas injection to lower position of recirculation pipe. In this experiment liquid oxygen and gas helium is used as propellant and injection gas. Under atmospheric and pressurized tank ullage condition, helium injection flow-rate is varied to observe the variation of recirculating flow-rate and propellant temperature in the feed pipe. There is appropriate helium injection flow-rate for gas-lift recirculation system.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.26 no.12
• /
• pp.2511-2518
• /
• 2002

Dynamic behaviors and stability of an optical disk drive coupled with an automatic ball balancer (ABB) are analyzed by a theoretical approach. The feeding system is modeled a rigid body with six degree-of-freedom. Using Lagrange's equation, we derive the nonlinear equations of motion for a non -autonomous system with respect to the rectangular coordinate. To investigate the dynamic stability of the system in the neighborhood of the equilibrium positions, the monodromy matrix technique is applied to the perturbed equations. On the other hand, time responses are computed by the Runge -Kutta method. We also investigate the effects of the damping coefficient and the position of ABB on the dynamic behaviors of the system.

• Proceedings of the KSR Conference
• /
• 2000.11a
• /
• pp.712-719
• /
• 2000

This paper presents a new algorithm to analyze a train voltages of multi-trains in auto-transformer-fed AC railway systems, using electrical equivalent change. The train current will be divided into circulation and return currents, and these current values are the same. By evaluating each current independently, the result will be more precise. The train current flows through the all auto-transformer corresponding to track impedance. In analyzing the railway system, the algorithm is based on the K.C.L, K.V.L, superposition and circuit separation method. Multi-train's voltages are determined by calculating the catenary voltage at each train's position and adding up these train's voltage drop. Case studies use a field operational data, show that tile proposed method is easily applied.

• Proceedings of the KWS Conference
• /
• 2005.11a
• /
• pp.132-134
• /
• 2005

The friction surfacing system which has been successfully developed in RIST has both position control and force control by using hydraulic cylinder. In friction surfacing process mechtrode rotation speed(N) and feeding speed($V_{z}$), travelling speed($V_{x,y}$) are of critical importance for the width and thickness of the coating. As a result of DOE with developed system, the main effect of coating thickness is a rotation speed of mechtrode.

• Proceedings of the KIEE Conference
• /
• 1997.07a
• /
• pp.306-308
• /
• 1997

In this paper, We present the transient analysis method of induction motor by TDFE(Time Domain Finite Element) method. For simulation of transient performance, Maxwell's equations are solved using 2-Dimensional TDFE method, and the circuit equations from the stator and rotor are solved simultaneously. The time derivatives are discretized with Euler scheme and the Newton-Raphson iteration method is applied to a large system of equations which are representing the whole magnetic and feeding circuit equations because of the magnetic nonlinearity of the stator and rotor core. The presented method is applied to three phase induction motor. And we obtained the phase currents, torque and rotor position until the steady state.

• Proceedings of the IEEK Conference
• /
• 2002.07c
• /
• pp.1420-1423
• /
• 2002

The classification and recognition of two-dimensional trademark patterns independently of their position, orientation, size and scale by proposing two feature vectors has been discussed. The paper presents experimentation on two feature vectors showing size- invariance and scale-invariance respectively. Both feature vectors are equally invariant to rotation as well. The feature extraction is based on local as well as global statistics of the image. These feature vectors have appealing mathematical simplicity and are versatile. The results so far have shown the best performance of the developed system based on these unique sets of feature. The goal has been achieved by segmenting the image using connected-component (nearest neighbours) algorithm. Second part of this work considers the possibility of using back propagation neural networks (BPN) for the learning and matching tasks, by simply feeding the feature vectosr. The effectiveness of the proposed feature vectors is tested with various trademarks, not used in learning phase.