• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2005년도 춘계학술대회 논문집
• /
• pp.180-183
• /
• 2005

The purpose of this study is to evaluate a closed-die forging method for large crank throw using analytical and numerical approaches. A closed-die forging equipment with wedge and links was proposed to forge large crank throw using kinematic analysis. The minimum press capacity for the closed-die forging was established using the comprehensive FEA.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2008년도 춘계학술대회 논문집
• /
• pp.209-212
• /
• 2008

Hydroforming Technology has been applied to manufacture in various parts of automobile. Especially, Exhaust manifold has been applied to hydroforming method in the foreign advanced automotive company. Exhaust manifold runner is important exhaust parts that heat-resistant and exhaust flow characteristics are requested in the automobile. The purpose of this study is to optimize the manufacturing method of exhaust maniflold runner using FEA and to propose to get a optimization design direction. In addition, Comparative analysis between conventional exhaust maniflold and hydroformed exhaust maniflold has been done in view of weight-saving, manufacturing advantage.

• Journal of Power Electronics
• /
• 제19권3호
• /
• pp.794-802
• /
• 2019

Magnetic geared motors are driven using the same operating principle as conventional synchronous motors in which a magnetic gear is embedded. The magnetic geared motor is structurally similar to a magnetic gear. However, by applying currents to the stator coil, the high-speed rotor is rotated by a magnetic field and the low-speed rotor is rotated according to the gear ratio. In this paper, the operational principle of a magnetic geared motor and the magnetic flux density in its inner and outer air gaps are described. Then the magnetic flux density in the two air gaps is used to express a method for calculating the electrical and mechanical output. Results obtained with the analytical calculation method are compared with those of the finite element analysis. Finally, a prototype is used to verify the results of the analytical calculation and FEA.

• 대한기계학회논문집A
• /
• 제32권11호
• /
• pp.990-996
• /
• 2008

Nowadays, the trend to a lightweight design accelerates the use of advanced high strength steel (AHSS) in automotive industry. Springback phenomena is a hot issue in the sheet metal forming, especially bending process using AHSS. Several analytical methods for that have been proposed in recent years. Each of method has their advantages and disadvantages. There are only a few optimal solutions which can minimize the two objectives simultaneously. In this study, an effective method optimized the multi objective value. The method by the design of experiments(DOE) and artificial neural network(ANN) was presented to compensate springback of bending parts. This method was applied to L and V bending process. The effective method could be optimized to multiple object. It was confirmed that the proposed method was more efficient than traditional manual FEA procedure and the trial and error approach for springback compensation.

• Journal of Electrical Engineering and Technology
• /
• 제13권2호
• /
• pp.752-760
• /
• 2018

In this paper, interior permanent magnet synchronous motor (IPMSM) design for sensorless drive, considering magnetic neutral point shift according to magnetic saturation, has been proposed. Sensorless control was divided into a method based on inductance and a method based on back induced voltage. Because induced voltage is very small at zero or low speed, error in rotor initial position estimation may occur. Using the ratio of saliency addresses this problem. When using high-frequency injections at low speed, the rotor's initial position is estimated at the smallest portion of the inductance. IPMSM has the minimum inductance at the d-axis. However, if magnetic saturation leads to magnetic neutral point variation, following the load current change, there is a change in the minimum point of inductance. In this case, it can lead to failure of initial rotor position estimation. As a result, it is essential that the blocking design has an inductance minimum point shift. As such, in this study, an IPMSM design method, by blocking magnetic neutral point change, has been proposed. After determining the inductance profile based on the finite element analysis (FEA), the results of proposed method were verified.

• 한국해양환경ㆍ에너지학회지
• /
• 제19권3호
• /
• pp.194-202
• /
• 2016

본 연구에서는 10 MW급 부유식 파력-풍력 복합발전 시스템의 플랫폼 초기 개념설계를 위해 유한요소해석 기반 위상 최적화를 검토하였다. 실제 파력-풍력 복합발전 시스템 플랫폼의 위상최적화를 수행하기 전에 단순화된 구조설계 문제를 이용하여 효율적인 위상최적화 이론을 확인하고자 밀도법과 균질화설계법의 두 가지 위상최적화 이론을 적용하였다. 단순화된 설계 문제의 결과로부터 균질화설계법 이론을 파력-풍력 복합발전 시스템의 플랫폼 위상최적화에 적용하였다. 파력-풍력 복합발전 시스템의 플랫폼 개념설계를 위해서 유한요소해석 모델을 생성하고 설치해역의 해양환경하중을 고려하여 구조해석을 수행하였다. 설계파 및 조류와 같은 해양환경하중으로부터 기인하는 플랫폼 상의 압력과 계류삭의 인장력을 산출하기 위하여 동수력학 해석을 수행하였다. 구조해석을 위한 하중조건은 부유체 동수력학 해석으로부터의 결과와 파력-풍력 복합발전 시스템 중량을 고려하였고, 경계조건은 관성제거법을 사용하여 구현하였다. 밀도법 기반 파력-풍력 복합발전 시스템 플랫폼의 위상최적화 결과로부터 개념설계 단계에서 주요 구조부재의 배치방안을 제시하였다. 본 연구결과로부터 위상최적화는 부유식 파력-풍력 복합발전 시스템과 같은 새로운 형식의 해양구조물 개발에 있어서 주요 구조부재 배치의 개념설계에 대해 유용한 설계도구임을 확인하였다.

• 한국전산구조공학회논문집
• /
• 제23권1호
• /
• pp.1-8
• /
• 2010

푸리에 급수는 사인 곡선처럼 일정한 진폭으로 진동하는 정규파(wave)를 사용한다. 그래서 푸리에 급수에서 사용하는 함수는 진동수의 크기가 시간에 따라 변하지 않기 때문에 국부적인 영역에서 급작스런 진동이나 불연속성을 갖는 신호를 표현하기에는 한계가 있다. 그러나 이러한 푸리에 해석의 단점을 여러개의 적절한 웨이블렛의 선형조합에 의해 보완할 수 있는 것이 웨이블렛 급수해석이다. 시간에 집중되어진 궤적의 작은 잔파(wavelet)를 사용함으로써 시간과 주기의 폭을 변화시킬 수 있기 때문에 유동적이고, 특이(singular)형상을 지닌 신호들을 보다 효율적으로 표현할 수 있다. 이 연구의 주요 목적은 웨이블렛 급수해석이라고 불리는 방법을 2계 편미분방정식으로 표현되는 1차원 축방향 부재에 웨이블렛 이론을 적용함과 동시에 유한요소법과 같은 수치해석법과의 비교를 통해 성능평가를 위해 제안되었다. 여러 형태의 웨이블렛 함수의 검토 후에 HAT 함수가 웨이블렛 및 스케일링 함수로 채택되었다. 등분포하중을 받는 경우의 축방향 부재해석에서 제안된 방법은 유한요소법과 같이 효율적임을 보이며, 특히 응력특이점에서는 더 정확한 값을 보였으며, 계산시간도 절약되는 장점을 얻을 수 있었다.

• 대한기계학회논문집A
• /
• 제37권7호
• /
• pp.865-873
• /
• 2013

CNG 압력용기의 제조를 위하여 고성능 수평식 프레스를 이용한 딥드로잉과 아이어닝의 연속공정(D.D.I. 공정)이 도입되었다. 그러나, 몇몇 D.D.I. 공정 변수들은 현장 경험에 의존하여 결정되는 문제점이 있으며, 다이의 짧은 수명 역시 고성능, 저비용의 압력용기 제조를 위하여 필수적으로 개선되어야 한다. 본 연구에서는, 공정의 신뢰성 확보 및 다이 수명 향상을 위하여 기존 관련 연구 및 현장 경험을 바탕으로 드로잉비, 다이 간의 간격, 드로잉 다이의 라운딩 반경, 아이어닝 다이의 각도를 공정변수로 결정하였다. FEA 를 이용하여 각 성형 단계에서 찢어짐과 주름이 발생하지 않는 한계 드로잉비를 결정하였고, 다이 간의 간격, 드로잉 다이의 라운딩 반경, 아이어닝 다이의 각도에 대하여 실험계획법을 이용하여 최적 공정설계를 수행하였으며, 기존 공정에 의한 결과와 비교하여 효율성을 검증하였다.

• Journal of Korean Neurosurgical Society
• /
• 제30권3호
• /
• pp.358-365
• /
• 2001

Objectives : Although posterior lumbar fusion operations had been reported to accelerate spinal degeneration, there have been only a few studies for their biomechanical effects. We have studied the change of motion range at the vertebral joint one level above the fusion(UVJ) in pedicle screw fixation group(PSF)(n=13) where facet capsule was destroyed and in posterior lumbar interbody fusion group(PLIF)(n=8) where it was spared. Patients and Methods : The patients were divided into early(3 to 6 months) and late(over 12 months) according to postoperative follow-up period. The flexion, extension and flexion-extension angles(FA, EA, FEA) were measured at the UVJ with pre-operative, early and late post-operative films. Results : Mean age and male to female ratio were $52.7{\pm}9.3$ and 1 : 3.2. Mean follow-up periods were $144.1{\pm}30.0$ and $528.8{\pm}160.3$ days in early and late groups, respectively. The FEA and FA in the late PSF($11.8{\pm}3.1$, $8.5{\pm}2.9$) were significantly greater than pre-operative angles($7.8{\pm}3.9$, $5.1{\pm}3.7$)(p<0.01, p<0.05). All angles in the PLIF showed no significant changes with time. The FEA and FA in the late PSF($11.8{\pm}3.1$, $8.5{\pm}2.9$) were significantly greater than those of the late PLIF($7.6{\pm}2.3$, $3.4{\pm}2.0$)(p<0.01, p<0.001). All angles at early follow-up period were similar between PSF and PLIF. The EA showed no significant change in relation with follow-up period or fusion method. Conclusion : As a result, the facet capsule injury in pedicle screw fixation seems to be related with increased flexion angle or degeneration of the adjacent joint above the fused vertebra in the late phase.

• Journal of Periodontal and Implant Science
• /
• 제36권2호
• /
• pp.531-554
• /
• 2006

Oral implants must fulfill certain criteria arising from special demands of function, which include biocompatibility, adequate mechanical strength, optimum soft and hard tissue integration, and transmission of functional forces to bone within physiological limits. And one of the critical elements influencing the long-term uncompromise functioning of oral implants is load distribution at the implant- bone interface, Factors that affect the load transfer at the bone-implant interface include the type of loading, material properties of the implant and prosthesis, implant geometry, surface structure, quality and quantity of the surrounding bone, and nature of the bone-implant interface. To understand the biomechanical behavior of dental implants, validation of stress and strain measurements is required. The finite element analysis (FEA) has been applied to the dental implant field to predict stress distribution patterns in the implant-bone interface by comparison of various implant designs. This method offers the advantage of solving complex structural problems by dividing them into smaller and simpler interrelated sections by using mathematical techniques. The purpose of this study was to evaluate the stresses induced around the implants in bone using FEA, A 3D FEA computer software (SOLIDWORKS 2004, DASSO SYSTEM, France) was used for the analysis of clinical simulations. Two types (external and internal) of implants of 4.1 mm diameter, 12.0 mm length were buried in 4 types of bone modeled. Vertical and oblique forces of lOON were applied on the center of the abutment, and the values of von Mises equivalent stress at the implant-bone interface were computed. The results showed that von Mises stresses at the marginal. bone were higher under oblique load than under vertical load, and the stresses were higher at the lingual marginal bone than at the buccal marginal bone under oblique load. Under vertical and oblique load, the stress in type I, II, III bone was found to be the highest at the marginal bone and the lowest at the bone around apical portions of implant. Higher stresses occurred at the top of the crestal region and lower stresses occurred near the tip of the implant with greater thickness of the cortical shell while high stresses surrounded the fixture apex for type N. The stresses in the crestal region were higher in Model 2 than in Model 1, the stresses near the tip of the implant were higher in Model 1 than Model 2, and Model 2 showed more effective stress distribution than Model.