• Ocean and Polar Research
• /
• v.33 no.4
• /
• pp.435-445
• /
• 2011

We investigated geochemical properties, and microbial sulfate- and iron(III) reduction in sediment influenced by the aquaculture of abalone in the Nohwa-do, southern coastal sea in Korea. Concentrations of ammonium, phosphate, and sulfide in the pore-water were higher at farm sites than at control sites. The differences between the 2 types of sites were most apparent in terms of the weights of abalone and the temperature increase during September. Accordingly, the rates of sulfate reduction at the farm sites during September (61 mmol S $m^{-2}d{-1}$) were 3-fold higher than the sulfate reduction during May (20 mmol S $m^{-2}d{-1}$). In contrast, Fe(III) reduction rates were highest at the control sites in May, but its significance was relatively decreased at farm sites during September when sulfate reduction rates were highest. During September, benthic ammonium flux was 3-fold greater at the farm sites (35 mmol N $m^{-2}d{-1}$) than at the control sites (12 mmol N $m^{-2}d{-1}$), and phosphate flux was 8-fold higher at the farm sites (0.018 mmol P $m^{-2}d{-1}$) than at control sites (0.003 mmol P $m^{-2}d{-1}$). Overall results indicated that the inappropriate operation of a large-scale aquaculture farm may result in excess input of biodeposits and high nutrient fluxes from the sediment, thereby decreasing diversity of the benthic ecosystem and deepening eutrophication in coastal waters.

• Journal of the Korean Magnetics Society
• /
• v.21 no.3
• /
• pp.116-119
• /
• 2011

A Chinese shipping boat collided with two Japanese coast guard boats in waters near the disputed Senkaku islands (known as Diaoyudao in China) in the East China Sea on September 7th last year. The boat was held and captain was arrested by Japanese Government. The incident soon turned into a big political and economic conflict between the two countries. Japan's intention was to show her tight control over Senkaku, whereas China's intention was to make it a disputed territory in the eyes of international politics. While the conflict was going on, a top-rank bilateral talk between the two countries was suspended, boycott of Japanese goods was suggested, numerous rallies were held in both countries. This situation lasted for several months until China used an extreme card of "Cutting Supply of Rare Earth to Japan". Under this pressure, Japan instantly released the captain and closed the case. Over this incident, public noticed the importance of rare earth and its impact on the global economy. Since then, the policy of Chinese Government for the rare earth has created more confusion and turmoil in the global market. The purpose of this article is to overview the price rally and future of the rare earth.

• Journal of Aquaculture
• /
• v.17 no.2
• /
• pp.122-127
• /
• 2004

On protein equivalence base, fishmeal (FM) was replaced by lysine cell mass (LCM) in selected different diets in Korean rockfish, Sebastes schlegeli (Hilgendorf) Eight experimental diets were formulated to contain 100% FM (LC $M_{0}$), 90% FM+10% LCM (LC $M_{10}$),80% FM+20% LCM (LC $M_{20}$), 70% FM+30% LCM (LC $M_{30}$), 60% FM+40% LCM (LC $M_{40}$ ), 70% FH+30% LCM+lysine (LC $M_{+Lys}$), 60% FM+40% LCM+lysine (LC $M_{40+Lys}$), and 50% FM+50% LCM+lysine (LC $M_{50+Lys}$). Experimental individuals of the fish (12.6 g) were randomly fed on one of the experimental diets. After 6 weeks of feeding trial, weight gain (WG) and feed efficiency (FE) of fish fed LC $M_{0}$ diet was significantly (P〈0.05) higher than those of fish fed LC $M_{20}$, LC $M_{30}$, LC $M_{40}$ , LC $M_{30+Lys}$, LC $M_{40+Lys}$, and LC $M_{50+Lys}$ diets, however, there was no significant difference in WG of fish fed LC $M_{0}$ and LC $M_{10}$ diets. Supplementation of lysine has no effect on WG. There was no significant difference in condition factor (CF) of fish fed LC $M_{0}$, LC $M_{10}$ and LC $M_{20}$ diets. Hemoglobin (Hb) of fish fed LC $M_{0}$, LC $M_{10}$, LC $M_{20}$, LC $M_{30}$, LC $M_{40}$ , LC $M_{30+Lys}$, and LC $M_{40+Lys}$, diets were not significantly different from each other. No significant differences were observed in hematocrit (PCV) and hepatosomatic index (HSI) among all dietary treatments. Apparent digestibility of dry matter (ADM) and protein (ADP) of diets significantly decreased with increase in dietary LCM level, though there was no difference in ADM and ADP between LC $M_{0}$ and LC $M_{10}$. These results indicate that LCM could replace up to 10% of fishmeal in Korean rockfish diets.ish diets.iets.ish diets.s.ish diets.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.44 no.5
• /
• pp.554-559
• /
• 2011

To measure the proximate composition and mineral content of laver Porphyra yezoensis, we collected 30 raw and 30 dried laver from the major production area of the south coast of Korea (Busan, Goheung, Haenam, Wando). The approximate composition of a 100 g edible portion of raw laver was $89.9{\pm}1.4$ g moisture, $3.7{\pm}1.0$ g protein, $0.5{\pm}0.2$ g lipids, $2.1{\pm}1.8$ g carbohydrate and $3.9{\pm}0.6$ g ash. The approximate composition of a 100 g portion of dried laver was $8.9{\pm}1.6$ g moisture, $31.5{\pm}6.5$ g protein, $1.9{\pm}0.3$ g lipids, $48.4{\pm}6.5$ g carbohydrate and $9.3{\pm}1.1$ g ash. No clear regional variation in laver composition was observed. The mineral content of laver was expressed as dry weight. The mean macro mineral content per 100 g portion of raw laver was (in descending order): K ($1,979{\pm}863.0$ mg), Na ($1,063.2{\pm}498.8$ mg), P ($658.7{\pm}101.8$ mg), Mg ($432.3{\pm}83.5$ mg) and Ca ($394.2{\pm}136.5$ mg). In comparison, the mean micro mineral content of raw laver was (in descending order): Fe ($243.72{\pm}154.75\;{\mu}g/g$), Zn ($72.76{\pm}30.61\;{\mu}g/g$), Mn ($41.53{\pm}15.33\;{\mu}g/g$), Cu ($4.16{\pm}1.66\;{\mu}g/g$) and Ni ($0.43{\pm}0.70\;{\mu}g/g$) No clear regional variation in the mineral content of laver was observed; however, raw laver contained a higher mineral content than dried laver.

• Ocean and Polar Research
• /
• v.24 no.2
• /
• pp.123-134
• /
• 2002

Seasonal variations of settling particles and metal fluxes were monitored at a nearshore site of Marian Cove, King Geroge Island, Antarctica from 28th February 1998 to 22nd January 2000. Near-bottom sediment traps were deployed at 30m water depth of the cove, and sampling bottles were recovered every month by SCUBA divers. Total particulate flux and metal concentrations were determined from the samples. Total particulate flux showed a distinct seasonality, high in austral summer and low in austral winter: the highest flux $(21.97g\;m^{-2}d^{-1})$ was found in February of 1999, and the lowest $(2.47g\;m^{-2}d^{-1})$ in September of 1998, when sea surface was frozen completely. Lithogenic particle flux accounted for 90% of the total flux, and showed a significantly negative correlation with the thickness of snow accumulation around the study site. It was suggested that the most of the lithogenic particles trapped in the bottles was transported by melt water stream from the surrounding land. Fluxes of Al, Fe, Ti, Mn, Zn, Cii, Co, Ni, Cr, Cd, and Pb showed similar seasonal variations with the total flux, and their averaged fluxes were 34000, 9000,960, 180, 13.8, 17.6, 3.0,2.1, 5.4, 0.02, and $1.5nmol\;m^{-2}d^{-1}$ respectively. Among the metals, Cu and Cd showed the most noticeable seasonal patterns. The Cd flux correlated positively with the fluxes of biogenic components while the Cu flux correlated with both the lithogenic and biogenic particle fluxes. The Cu flux peak in the late summer is likely related to a substantial amount of inflow of ice melt water laden with Cu-enriched lithogenic particles. On the other hands, the Cd flux peak in the early spring may be associated with the unusually early occurred phytoplankton bloom.

• Journal of the Mineralogical Society of Korea
• /
• v.22 no.2
• /
• pp.129-138
• /
• 2009

The XRF core scanner was used, to analyze high resolution chemical elements in deep sea sediment cores from Clarion-Clipperton fracture zone of the northeastern Pacific. Comparison of data estimated by the XRF core scanner with ICP-AES showed relatively weak correlation coefficients between elements (especially Ba, Pb, Sr, Zr) except for Mn contents ($r^2$ > 0.89). However down-core variations of most elements seemed to be well matched each other and furthermore, XRF core scanner data reflected changes of sedimentary facies characterized by sediment colors. Mn/Al ratio dramatically changed at boundaries of facies in BC08-02-05 and BC08-02-13 but progressive changes occured in BC08-02-02, BC08-02-09 and BC08-02-10 where the sediments have been affected by bioturbations. The difference of Mn/Al ratio in each facies (Facies I, Facies II, Facies III) has been caused by redox condition of depositional environment. Vertical change of Mn/Al ratio were divided into two types probably affected by activities of benthic organisms in the study area.

• KSBB Journal
• /
• v.27 no.6
• /
• pp.352-360
• /
• 2012

Bacillus clausii I-52 which produced SDS- and $H_2O_2$-tolerant extracellular alkaline protease (BCAP) was isolated from heavily polluted tidal mud flat of West Sea in Incheon, Korea and stable strain (transformant C5) of B. clausii I-52 harboring another copy of BCAP gene in the chromosome was developed using the chromosome integration vector, pHPS9-fuBCAP. When investigated the production of BCAP using B. clausii transformant C5 through pilot-scale submerged fermentation (500 L) at $37^{\circ}C$ for 30 h with an aeration rate of 1 vvm and agitation rate of 250 rpm, protease yield of approximately 105,700 U/mL was achieved using an optimized medium (soybean meal 2%, wheat flour 1%, sodium citrate 0.5%, $K_2HPO_4$ 0.4%, $Na_2HPO_4$ 0.1%, NaCl 0.4%, $MgSO_4{\cdot}7H_2O$ 0.01%, $FeSO_4{\cdot}7H_2O$ 0.05%, liquid maltose 2.5%, $Na_2CO_3$ 0.6%). The enzyme stability of BCAP was increased by addition of polyols (10%, v/v) and also, the stabilities of BCAP towards not only the thermal-induced inactivation at $50^{\circ}C$ but also the SDS and $H_2O_2$-induced inactivation at $50^{\circ}C$ were enhanced. Among the polyols examined, the best result was obtained with propylene glycol (10%, v/v). The BCAP supplemented with propylene glycol exhibited extreme stability against not only the detergent components such as ${\alpha}$-orephin sulfonate (AOS) and zeolite but also the commercial detergent preparations. The granulized enzyme of BCAP was prepared with approximately 1,310,000 U/g of granule. Wash performance analysis using EMPA test fabrics revealed that BCAP granule exhibited high efficiency for removal of protein stains in the presence of anionic surfactants as well as bleaching agents. When compared to Savinase 6T$^{(R)}$ and Everlase 6T$^{(R)}$ manufactured by Novozymes, BCAP under this study probably showed similar or higher efficiency for the removal of protein stains. These results suggest that the alkaline protease produced from B. clausii transformant C5 showing high stability against detergents and high wash performance has significant potential and a promising candidate for use as a detergent additive.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.38 no.4
• /
• pp.419-425
• /
• 2014

This study applied finite element analysis (FEA) to the body frame of the 200-meter class multi-legged subsea walking robot known as Crabster (CR200). The body frame of the CR200 is modeled after the ribcage of a human so that it can disperse applied external loads. It is made of carbon-fiber-reinforced plastic (CFRP). Therefore, the frame is lighter and stronger than it would be if it were made of other conventional materials. In order to perform FEA for the CFRP body frame, we applied the material properties of the CFRP as obtained from a specimen test to an FE model of CFRP frame. Finally, we performed FEA with respect to the load conditions encountered when the robot is launched into and recovered from the sea. Also, we performed FEA for the frame, assuming that it was fabricated using a conventional material, in order to compare its characteristics with CFRP.

• Korean Journal of Ecology and Environment
• /
• v.33 no.1 s.89
• /
• pp.31-37
• /
• 2000

For the purpose of surveying the physicochemical composition of sediment collected from Kwangyang Bay, the percentage of water loss, COD, $H_2S$, grain size and 10 heavy metals were studied at 17 sites. During the surveying period, the changes of the percentage of water loss were appeared $35.5\;{\sim}\;53.8%$. COD and $H_2S$ were showed $3.8\l{\sim}\;12.9\;mg/g$, and $0.1\;{\sim}11.4\;{\mu}g/g$, respectively, In composition of grain size on the sediment, percentages of grain sizes under $74\;{\mu}m$ were varied from 40.5% to 86.7% and above $74\;{\mu}m$ were varied from 11.5% to 43.0%. From the spatial distribution of heavy metal using contour map, we can suppose some heavy metal discharges which affect sediment of Kwangyang Bay, It was estimated that Shinpung creek, Ssang-bong creek, and draining area of sewange treatment plant were the main discharge among the heavy metal output sources. By comparison between present study and heavy metal guideline of nonpolluted sea sediment that is provided by EPA, US, it was showed that the contents of Pb and Hg were acceptable but contents of Mn, Zn, Cu, Fe, As, and Cr were higher than those of EPA guideline.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.21 no.6
• /
• pp.744-750
• /
• 2015

In this paper, development of mobile robot for the inspection of hull surface was mentioned. In the sea, it is difficult to proceed with the visual inspection of hull side and thus mobile robot for checking the status could be run with strap-on its surface. To do this, permanent magnet module to generate magnetic force between hull surface and mobile robot, and structure to minimize variance of the force under curvature circumstance were considered on the design. Based on the design, mobile robot with four NdFeB, four driving wheels and image aquisition module was applied. Load experiment to check the adhesive force, slip test during stop state and driving test to measure driving speed were executed. From the experiments 13 Kgf adhesive force was obtained and slip was not happened until 8 Kgf load on the inclined plate. Driving speed of mobile robot was measured at 0.82 m/s corresponding to 6.5 ampere. We confirmed the effectiveness of developed mobile robot by experiments to check its characteristics.