• 제목/요약/키워드: F2C

검색결과 6,904건 처리시간 0.033초

연료용 알콜의 고온발효를 위해 분리한 고온성 효모균주 Saccharomyces cerevisiae F38-1의 발효 특성 (The Fermentation Characteristics of Saccharomyces cerevisiae F38-1 a Thermotolerant Yeast Isolated for Fuel Alcohol Production at Elevated Temperature)

  • 김재완;김상헌;진익렬
    • 한국미생물·생명공학회지
    • /
    • 제23권5호
    • /
    • pp.624-631
    • /
    • 1995
  • The fermentation characteristics of Saccharomyces cerevisiae F38-1, a newly isolated thermotolerant yeast strain from a high temperature environment have been studied using a fermentation medium containing 20% glucose, 0.2% yeast extract, 0.2% polypeptone, 0.3% (NH$_{4}$)$_{2}$SO$_{4}$, 0.1% KH$_{2}$PO$_{4}$, and 0.2% MgSO$_{4}$ without shaking at 30$\circ$C to 43$\circ$C for 5 days. The fermentability was over 90% at 30$\circ$C, 88% at 37$\circ$C, 77% at 40$\circ$C and 30% at 43$\circ$C. A similar fermentation result was obtained at pH between 4 and 6 at 30$\circ$C and 40$\circ$C. Aeration stimulated the growth of the strain at the beginning of the fermentation, but it reduced alcohol production at the end of alcohol fermentation. Optimal glucose concentration was determined to be between 18 and 22% at 40$\circ$C as well as 30$\circ$C, but the growth was inhibited at the glucose concentration of over 30%. A fermentability of over 90% was observed at 40$\circ$C in 2 days when the medium was supplemented by 2% yeast extract. A higher inoculum size increased the initial fermentation rate, but not the fermentation. A fermentability of over 90% was achieved in 2 days at 40$\circ$C in a fermentor experiment using an optimized medium containing 20% glucose and 1% yeast extract.

  • PDF

비정질 실리콘 태양전지 고효율화를 위한 전면투명전도막/p 최적연구 (A optimum studies of TCO/p-layer for high Efficiency in Amorphous Silicon Solar cell)

  • 이지은;이정철;오병성;송진수;윤경훈
    • 한국신재생에너지학회:학술대회논문집
    • /
    • 한국신재생에너지학회 2007년도 추계학술대회 논문집
    • /
    • pp.275-277
    • /
    • 2007
  • 유리를 기판으로 하는 superstrate pin 비정질 태양전지에서 전면투명전도막(TCO)과 p-layer의 계면이 태양전지의 효율을 내는데 가장 큰 기여를 한다. 전면투명전도막(TCO)으로 현재 일반적으로 사용되는 ZnO:Al는 $SnO_2:F$ 보다 전기,광학적으로 우수하고, 안개율(Haze)높으며, 수소 플라즈마에서의 안정성이 높은 특정을 갖고 있다. 그래서 박막 태양전지 특성향상에 매우 유리하나, 태양전지로 제조했을 때, $SnO_2:F$보다 충진율(Fill factor:F.F)과 V_{\infty}$ 가 감소한다는 단점을 가지고 있다. 본 실험실에서는 $SnO_2:F$의 F.F가 72%이 나온 반면 ZnO:Al의 F.F은 68%에 그쳤다. 이들 원인을 분석하기 위해 TCO/p-layer의 전기적 특성을 알아 본 결과, $SnO_2:F$보다 ZnO:Al의 직렬저항이 높게 측정되었다. 이러한 결과를 바탕으로 p-layer 에 R={$H_2/SiH_4$}=25로 변화, p ${\mu$}c$-Si:H/p a-SiC:H 로 p-layer 이중 증착, p-layer의 boron doping 농도를 증가시키는 실험을 하였다. 직렬저항이 가장 낮았던 p ${\mu$}c$-Si:H/p a-SiC:H 로 p-layer 이중 증착에서 Voc는 0.95V F.F는 70% 이상이 나왔다. 이들 각 p층의 $E_a$(Activation Energy)를 구해본 결과, ${\mu$}c$-Si:H의 Ea 가 가장 낮은 것을 관찰 할 수 있었다.

  • PDF

왼쪽 유방암 세기변조방사선 치료시 Skin Flash 적용에 대한 유용성 평가 (Evaluating efficiency of application the skin flash for left breast IMRT.)

  • 임경달;서석진;이제희
    • 대한방사선치료학회지
    • /
    • 제30권1_2호
    • /
    • pp.49-63
    • /
    • 2018
  • 목 적 : 왼쪽 유방암 세기변조방사선 치료 시 Skin flash를 적용함에 있어 치료계획의 변화를 알아보고, 적용하지 않았을 경우와 적용 했을 시 피부선량의 변화를 비교해 보고자 하였다. 또한 Skin flash를 다양한 두께별로 적용하여 두께별 피부선량의 변화를 비교, 분석해 보고, 적절한 Skin flash의 적용에 대해 알아보고자 한다. 대상 및 방법 : 실험대상은 Anthropomorphic phantom을 이용하였고, 치료계획을 위한 영상획득은 전산화 단층촬영(CT)으로 하였다. 전산화치료계획은 Eclipse(ver 13.7.16, Varian, USA)의 RTP 시스템을 이용하여 2 field hybrid IMRT와 6 field static IMRT의 두 가지 치료계획을 하였다. 위의 치료계획을 바탕으로 각 치료계획마다 Skin flash 두께를 0.5 cm, 1.0 cm, 1.5 cm, 2.0 cm, 2.5 cm으로 변경하여 추가치료계획을 수립하였고, 추가치료계획에 대해 총 MU값과 최대선량의 변화를 알아보았다. 치료 장비는 $VitalBeam^{TM}$(Varian Medical System, USA)의 6 MV를 이용하였다. 측정 장비는 MOSFET(metal oxide semiconductor field-effect transistor)을 이용하였고, 측정지점은 phantom의 왼쪽 유방의 센터를 기준으로 위(1번), 중간(2번), 아래(3번) 세 부위에 위치시켜 피부선량을 측정하였다. 그리고 인위적으로 좌표를 0.5cm 내측(medial), 외측(lateral)으로 이동시켜 피부선량의 변화를 비교 분석하였다. 결 과 : Skin flash를 적용하지 않은 치료계획 2F-hIMRT, 6F-sIMRT의 측정값을 기준선량으로 하였다. 2F-hIMRT의 1번 측정점 206.7 cGy, 2번 186.7 cGy, 3번 222 cGy였고, 6F-sIMRT의 기준값은 1번 192 cGy, 2번 213 cGy, 3번 215 cGy로 측정되었다. 이 기준값들과 비교하여 2F-hIMRT에서 1번 측정점은 Skin flash 2.0 cm, 2.5 cm 적용시 평균 261.3 cGy로 26.1 %diff로 가장 많은 선량차를 보였고, 2번 측정점은 Skin flash 2.0 cm일 때 평균 197.3 cGy, 5.6 %diff의 선량차가 났고, 3번 측정점은 Skin flash 2.5 cm일 때 최대 245.3 cGy, 10.5 %diff였다. 6F-sIMRT에서는 1번 측정지점이 Skin flash 2.0 cm 적용시에 216.3 cGy, 12.7 %diff로 가장 큰 선량차이를 보였고 측정지점별로 Skin flash 2.5 cm 적용시가 아닌 2.0 cm 적용시 선량차가 가장 크게 나타났다. 2F-hIMRT, 6F-sIMRT에서 각각 내측 0.5 cm 이동 후 Skin flash를 사용하지 않았을 때 측정치는 2F는 기준값과 비교시 1번, 3번 측정지점에서 -75.2 %diff, -70.1 %diff 차이였고, 6F는 1번, 2번, 3번 측정 지점에서 -14.8, -12.5, -21.0 %diff로 처방선량에 미치지 못하는 저선량이 측정되었다. 두 치료계획 모두 Skin flash 두께가 커질수록 총 MU와 최대선량이 증가하는 것으로 나타났고, 몇몇 결과를 제외하면 전체적으로 %diff도 증가했다. 모든 조건에서 0.5 cm의 Skin flash 두께 사용이 기준값의 피부선량과 약 20 % 이하의 차이로 가장 적은 것으로 나타났다. 결 론 : 결과에 따라 Skin flash의 두께를 0.5 cm으로 최소화 하는 것이 최대선량이나 MU의 증가를 최소화할 수 있었고, 기준이 되는 치료계획과도 가장 적은 피부선량차이를 보였기에 0.5 cm으로 최소화 하여 적용하는 것이 가장 이상적이라 할 수 있을 것이다. 또한 Skin flash 두께를 무한정 크게 한다고 해서 MU나 최대선량, 피부선량차가 증가하지 않고 수렴한다는 것을 알 수 있었다. 그러므로 유방암 환자의 호흡에 의한 PTV의 변화와 여러 오차의 인자들을 고려한다면 0.5~1.0 cm Skin flash 범위에서 Skin flash를 사용한다면 적용하지 않는 것보다는 더 많은 이점이 있을 것으로 사료된다.

  • PDF

Activation of Akt/PKB at Serine 473 by N-acetylphytosphingosine (NAPS) and $C_{2}-ceramide$ Reduces Melanin Synthesis in B16F10 Mouse Melanoma Cells

  • Yi, Seh-Yoon;Han, Seon-Kyu;Park, Mee-Kyung;Yoo, Young-Sook
    • Molecular & Cellular Toxicology
    • /
    • 제2권2호
    • /
    • pp.81-88
    • /
    • 2006
  • Sphingolipid metabolites regulate many aspects of cell proliferation, differentiation, and apoptosis. In the present study, we have assessed the effects of the novel phytosphingosine derivative, N-acetylphytospingosine (NAPS), on the depigmentation of murine B16F10 melanoma cells, and have also attempted to identify the possible signaling pathway involved, in comparison with $C_{2}-ceramide$. NAPS and $C_{2}-ceramide$ both inhibited the growth of the B16F10 cells in a dose-dependent manner. Melanin content and tyrosinase activity were significantly reduced in response to treatment with NAPS and $C_{2}-ceramide$ at concentrations in a range between $1-5\;{\mu}M$. However, the levels of tyrosinase mRNA, as well as the levels of tyrosinase related protein-1 (TRP-1) and tyrosinase related protein-2 (TRP-2) genes and the level of tyrosinase protein remained unaffected by treatment with either NAPS or $C_{2}-ceramide$. We also attempted to determine the signaling pathway exploited by NAPS and $C_{2}-ceramide$. Interestingly, the phosphorylation of Akt/PKB at serine 473 by NAPS was reduced at the 5 minute mark, whereas $C_{2}-ceramide$ induced the phosphorylation of Akt/PKB at serine 473. Finally, Akt/PKB activity in the NAPS-treated cells was elevated in comparison with the untreated cells. LY294002, a specific PI3-K inhibitor which is located upstream of Akt/PKB, inhibited the phosphorylation of Akt/PKB, but induced an increase in melanin synthesis. These results suggest that the activation of Akt/PKB at serine 473 is related with the suppression of melanin production in the B16F10 mouse melanoma cells. Therefore, the mechanisms exploited by NAPS and $C_{2}-ceramide$ responsible for the depigmentation of B16F10 cells were concluded to involve the inhibition of melanosomal tyrosinase activity.

$H_2/O_2$ 비에 따른 Hybrid HVOF 용사된 $Cr_3C_2$-7wt%(NiCr) 용사층의 특성 및 산화거동 (Characteristics and oxidation behavior of the hybrid-HVOF sprayed $Cr_3C_2$-7wt%(NiCr) coatings depending on $H_2/O_2$ ratio)

  • 김병희;서동수
    • Journal of Welding and Joining
    • /
    • 제15권4호
    • /
    • pp.126-135
    • /
    • 1997
  • $H_2/O_2$ 비에 따른 Hybrid HVOF 용사된 $Cr_3C_2$-7wt%(NiCr) 용사층의 특성 및 산화거동 This study was performed to investigate the influence of fuel/oxygen ratio (F/O=3.2, 3.0, 2.8) on the characteristics and the oxidation behavior of the hybrid-HVOF sprayed $Cr_3C_2$-7wt%NiCr coatings. Decomposition and the oxidation of the $Cr_3C_2$was occured during spraying. The degree of transformation from $Cr_3C_2$to $Cr_7C_3$ was increased with decreasing the F/O ratio. The microstructural differences of the as sprayed coating with F/O ratio can not be distinguished, However, large pores were diminished and then the coatings became dense by heat treatment. Microhardness of the as-sprayed specimen which sprayed with F/O=3.0 condition was hightest ($Hv_{300}$=1140) and the hardness was increased to 1500 after heat treatment at $600^{\circ}C$ for 50hrs in air. It was supposed that hardness was increased due to the formation of $Cr_2O_3$ within $Cr_3C_2$/$Cr_7C_3$matrix and the densification of coating layer during heat treatment. Apparent activation energy for oxidation was varied from 21.2 kcal$mol^{-1}K^{-1}$ to 23.8 kcal$mol^{-1}K^{-1}$ with respect to the F/O ratio. The surface morphology was changed to porous and oxide chusters were grown after oxidation $1000^{\circ}C$ for 50 hours by the aggressive evolution of gas phase ($CrO_3$ and$CO_2$). The oxide cluster was composed of Ni and Cr.

  • PDF

SiCf/SiC 복합재료의 굽힘 강도 특성 및 균열 치유 효과 (Bending Strength and Crack Healing of SiCf/SiC Composite Material)

  • 안석환;도재윤;문창권;남기우
    • 동력기계공학회지
    • /
    • 제17권4호
    • /
    • pp.94-102
    • /
    • 2013
  • Manufactured $SiC_f/SiC$ composites by NITE method was investigated fracture characteristics according to the size of the surface crack. Coated surface crack with a $SiO_2$ colloid in several ways was evaluating the possibility of healing. The strength of CCS and UCS is 313 and 230MPa, respectively and it is about 1/3 of the SPS. Bending strength of $SiC_f/SiC$ composites has no effect with the pre-crack size to the critical crack size. $SiC_f/SiC$ composites can not generate large amount of $SiO_2$ oxides to the bottom of crack, and is only generated randomly on surfaces, and can not contribute to the recovery of bending strength.

미생물을 이용한 원유 및 원유제품의 분해 특성

  • 오경택;박귀환;이정일;이중기;김성준;;정선용
    • 한국생물공학회:학술대회논문집
    • /
    • 한국생물공학회 2000년도 추계학술발표대회 및 bio-venture fair
    • /
    • pp.435-438
    • /
    • 2000
  • 토양으로부터 2종류 그리고 해양으로부터 1종류의 원유 분해 미생물을 분리하였고, 이들을 strain A132, strain F722 그리고 strain OM1으로 각각 명명하였다. 이들 미생물은 Acinetobacter sp., Pseudomonas aeruginosa, Acinetobacter calcoaceticus로 각각 동정되었다. Strain A132. F722의 최적 배양 및 분해온도는 $35^{\circ}C$ 이고, 최적 생장 pH는 각각 8과 9에서 나타났다. 원유를 유일한 탄소원으로 하여 배양을 하였을 때 원유농도 2.0%(w/v)에서 생장이 높았다. 한편, 해양에서 분리된 strain OM1은 pH 7, 원유농도 3.0%(w/v)에서 생장이 높았다. 원유 분해능 조사에서는 Eleuthera (OMAN) 원유를 2.0%(w/v) 기질로 하였을 때, strain A132가 $25^{\circ}C$에서 $5.49g/\;l\;{\cdot}\;day$의 분해능을 나타내었다. 반면, L-Zakum (AFRICA) 원유에서는 strain F722가 $35^{\circ}C$에서 $1.19g/\;l\;{\cdot}\;day$의 분해능을 보였다. 등유$(nC_9-nC_{20})$와 경유$(nC_9-nC_{28})$에 대하여 분해특성을 조사한 결과 strain OM1은 배양 7일 후 95, 75%를 각각 분해하였다. Strain F722는 배양10일 후 80%의 분해율을 나타내었다.

  • PDF

광화제로서 $Fe_2O_3$, $MnO_2$, $CaF_2$$TiO_2$의 혼합물이 Mullite화에 미치는 영향 (Influence of Mixtures Composed of $Fe_2O_3$, $MnO_2$, $CaF_2$ and $TiO_2$ as Mineralizers on Mullitization)

  • 백용혁;최상흘;정창주;박현수
    • 한국세라믹학회지
    • /
    • 제15권1호
    • /
    • pp.9-15
    • /
    • 1978
  • The possiblity of mullitization from the domestic alunite by adding of $Fe_2O_3-MnO_2$, $Fe_2O_3-MnO_2-TiO_2$, $Fe_2O_3-MnO_2-CaF_2$, and $Fe_2O_3-MnO_2-CaF_2-TiO_2$ mixtures as mineralizers was studied at the temperature range between $1, 250^{\circ}C$~$1, 430^{\circ}C$. The modifying method of domestic alunite was performed by calcination, wet ballmilling, and washing with water. The following results were obtained; 1) When added of 3.0% $Fe_2O_3$ plus 1.0-1.5% $MnO_2$ to modified alunite, the appropriate temperature range of mullite-forming was $1, 350^{\circ}C$-$1, 400^{\circ}C$. 2) When added of $TiO_2$ as mineralizer, the mullite-forming temperature was higher than not added. 3) When added of $CaF_2$ as mineralizer, the synthesized mullite was resolve at the temperature above $1, 350^{\circ}C$.

  • PDF

가수분해형 탄닌 1-desgalloylrugosin-F에 의한 100 kDa 세포질 포스포리파아제 $A_2$ 활성의 억제효과 (Inhibition of 100 kDa Cytosolic Phospholipase $A_2$ by Hydrolysable Tannin, 1-desgalloylrugosin-F)

  • 진미령;신혜숙;정광묵;강미선;이민원;김대경
    • 약학회지
    • /
    • 제44권1호
    • /
    • pp.47-51
    • /
    • 2000
  • To examine whether DGRF inhibits $cPLA_2$ activity in vitro, we purified a 100 kDa $cPLA_2$enzyme from porcine spleen and performed an inhibition study at two concentrations of 5.0 and 50.0 $\mu$M 1-stearoyl-2-[1-$^{l4C}$ ]arachidonoyl-sn -glycero-3-phosphocholine as a substrate to rule out an apparent inhibition due to "substrate depletion". Here we reported that DGRF inhibited $cPLA_2$activity with $ID_{50}$ of 3.2 $\mu$M and virtually complete inactivation of the enzyme occurred at 60 $\mu$M. Interaction experiment between enzyme protein and inhibitor by ultrafiltration method indicated that 1-desgalloylrugosin-F inactivates $cPLA_2$enzyme by an irreversible mechanism.

  • PDF