• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.10 no.4
• /
• pp.659-666
• /
• 2006

Servo-motors are used as key components of automated system by performing precise motion control as accurate positioning and accurate speed regulation in response to the commands from computers and sensors. Especially, the linear brushless servo-motors have numerous advantages over the rotary servo motors which have connection with the friction induced transfer mechanism such as ball screws, timing belts, rack/pinion. This paper proposes an estimation method of unknown motor system parameters using the informations from the sinusoidal driving type linear brushless DC motor dynamics and outputs. The estimated parameters can be used to tune the controller gain and a disturbance observer. In order to meet this purpose high performance Digital Signal Processor, TMS320F240, designed originally for implementation of a Field Oriented Control(FOC) technology is adopted as a controller of the liner BLDC servo motor. Having A/D converters, PWM generators, rich I/O port internally, this servo motor application specific DSP play an important role in servo motor controller. This linear BLDC servo motor system also contains IPM(Intelligent Power Module) driver and hail sensor type current sensor module, photocoupler module for isolation of gate signals and fault signals.

• Proceedings of the KIPE Conference
• /
• 2001.12a
• /
• pp.41-45
• /
• 2001

This paper presents an implementation of motion control system of Switched Reluctance Motor (SRM) using digital hysteresis controller by TMS320F240 DSP. SRM position control system possess several advantages over other motors, including high efficiency, simple structure, low cost, and four-quadrant operation at a wide speed range, especially for the servo drive systems with precision, stability and fast response characteristics in the industrial applications. In the suggested motion control system, position control using digital hysteresis controller is developed, and is evaluated using experimental testing. The developed system for cost reduction and high-performance by fully digital controller is shown a good response characteristic of motion control results.

• Proceedings of the KIPE Conference
• /
• 2004.07b
• /
• pp.985-987
• /
• 2004

Switched Reluctance Motor(SRM) drive system is known to provide good torque characteristics and high efficiency drive. However, speed variation caused by higher torque ripple is one of main drawback. The Phase-Locked Loop (PLL) technique in conjunction with dynamic dwell angle control has good speed regulation characteristics. In this paper, appropriate advance angle control for high efficiency drive and PLL technique for accurate speed control is proposed. A TMS320F240 DSP is used to realize this drive system. Test results show that the system has good dynamic and precise speed control ability as well as high efficiency.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.567-569
• /
• 2001

This paper presents improved performance on the speed control of Switched Reluctance Motor(SRM) by using fuzzy logic speed controller. The nonlinear model of SRM is used and the motor used in experiment is a 6/4 SRM. In order to prove the superiority of the fuzzy logic controller, it is applied to make use of Matlab simulation program. And to implement the control method on the SRM drive. DSP(TMS320F240) based SRM speed controller is designed and fabricated. The simulation and experiment results show that FLC is effective in settling time maximum overshoot and torque ripple.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.583-585
• /
• 2001

This paper deals with a simulation and a position control for linear synchronous motor with Halbach array (HA) permanent magnet mover. The results of control simulation for HA-PMLSM having air-core primary are calculated using Matlab Simulink. The prototype of HA-PMLSM is tested DSP (TMS320F240 EVM).

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.647-649
• /
• 2001

It is a indispensible condition that the simulation and the experiment to improve a efficiency of maglev system. We usually carry out the simulation using the approximate equation, because it is impossible to use a exact modeling such as a practice modeling. This paper proposed a ideal simulation ap to the maglev system modeling by Finite Ele Method. To save the electrical energy, zero p control method is used, and verifying the feasibi FEM dynamic simulation, we make an exper with a TI DSP TMS320F240-based hardware.

• Proceedings of the KIEE Conference
• /
• 2001.07b
• /
• pp.1154-1156
• /
• 2001

This paper presents the implementation of a positon sensorless vector control system of a PM linear synchronous motor by sliding mode observer based on TMS320F240 DSP controller. Sliding mode observer estimates the secondary velocity and position based on the measurement of current, and it shows very robust characteristic to parameter variation. Therefore, it improves the system performance deterioration caused by system parameter variations. Simulation and experimental considerations are presented to confirm the applicability of sliding mode observer to the sensorless position control of PMLSM.

• Proceedings of the KIPE Conference
• /
• 2003.11a
• /
• pp.178-181
• /
• 2003

This paper presents a position sensorless control system of Switched Reluctance Motor(SRM) using Neural Network. The basic algorithm of this scheme is based on the flux linkage characteristic according to the phase currents and rotor position. A sufficient experimental data was used for neural network training. The proposed position sensorless control system was realized using TMS320F240 DSP. The experimental result shows some good results, and verifies the possibility of this algorithm.

• KIEE International Transaction on Electrical Machinery and Energy Conversion Systems
• /
• v.5B no.4
• /
• pp.324-330
• /
• 2005

The complex sensorless control scheme is not practical for use in the field of home appliance systems because it is not economical. Therefore, it is necessary to introduce a simplified sensorless control scheme that is composed of least calculation to estimate the rotor position. This paper presents the principle of the rotor position estimation with comparison of the estimated flux linkage and reference flux linkage. In order to verify the feasibility of the control scheme, ACSL is used for the simulation and TI DSP TMS320F240 is used for the experiment.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.5 no.3
• /
• pp.215-220
• /
• 2000

본 논문에서는 SRM운전에서 맥동토오크와 부하토오크의 변화로 인한 속도변경을 줄이기 위해 동적 도통각 제어 원리를 이용한 PLL(Phase Locked Loop) 속도제어 방식을 채택하였다. SRM은 많은 장점을 가지고 있으나 토오크리플에 따른 속도변동으로 정밀한 속도제어에 어려움이 있다. SRM 구동 시스템에 PLL을 적용한 결과 전동기는 강인한 정속도 운전을 할 수 있으며, 또한 운전속도에 따라 선행각을 조정함으로서 고효율 구동을 할 수 있었다. 구성된 시스템은 운전속도와 부하의 변화에 따라 선행각이 증가함으로써 뛰어난 동적 속도제어 특성을 갖고 있으며, 인버터 인가전압을 제어하는 선행각을 조정함으로서 일정부하 영역에서 높은 효율특성을 가진다. SRM 구동 시스템의 PLL 속도제어와 고효율 구동을 위한 도통각제어를 위해 TMS320F240 DSP를 사용함으로서 디지털 제어기의 유연성과 소형화를 꾀하였다.