• 한국세라믹학회지
• /
• 제18권2호
• /
• pp.75-78
• /
• 1981

The electrical conductivity of $(M_2O_3)_x (BaTiO_3)_{1-x}$ has been measured over the temperature range of 30 to 27$0^{\circ}C$. The substitution of rare earth oxide such as $La_2O_3$, $Nd_2O_3$, or $Dy_2O_3$ can be represented by $M_2O_3$. The additional mole fraction of the rare earth oxide is ranged over 0.0015 to 0.0030. The electrical conductivity exhibits an anomalous decrease near the tetragonal to cubic transition about 12$0^{\circ}C$. The decrease in the electrical conductivity is observed at the higher impurity concentrations owing to space charge layer. The increase in the electrical conductivity is observed as the impurity ion is varied from $La^{+3}$$Nd^{+3}$ to $Dy^{+3}$, due to overlap of 4f electrons of the inner shell.

• 대한조선학회지
• /
• 제24권1호
• /
• pp.35-41
• /
• 1987

An approximate method for calculating added resistance due to regular wave reflection has been established. In order to confirm the applicability of this method, an experimental work was carried out using a Series 60 model with oscillations in the 6-degrees of freedom restricted. Particular attention was paid to the case of the shorter wave length range where the effect of wave reflection is dominant compared to the effects of the ship's motions($\lambda/H=10.6-101.0,\;\lambda/L=0.23-1.18,\;F_n=0.10-0.25$). When comparing the measured and the computed resistance due to wave reflection in a head sea, good agreement is shown. This paper is based on research done by the Author as a member of the Ship Performance Group in the Department of Naval Architecture and Shipbuilding of the University of Newcastle-upon-Tyne in England, under the supervision of Dr. R.L. Townsin.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 1999년도 춘계학술대회 논문집
• /
• pp.150-153
• /
• 1999

The electrical and physical characteristics of MgO and Pt thin-films on Si wafers deposited by r.f magnetron sputtering, were analyzed with annealing condition(100$0^{\circ}C$, 120 min) by four point probe, SEM and XRD. Until annealing temperature of 100$0^{\circ}C$, MgO had the properties of improving Pt adhesion to SiO$_2$ and insulation without chemical reaction to Pt thin-films and the resistivity of Pt thin-films was improved. The thermal characteristics of Pt micro-heater were analyed with Pt-RTD integrated on the same substrate, In the analysis of properties of Pt-RTD, TCR value had 3927 ppm/$^{\circ}C$ and liner in the temperature range of 25~40$0^{\circ}C$ temperature of Pt micro-heater had up to 40$0^{\circ}C$ with 1.5 watts of the heating power.

• Bulletin of the Korean Chemical Society
• /
• 제29권9호
• /
• pp.1747-1751
• /
• 2008

Reactions of n-propyl fluoroformate in a variety of pure and binary solvents have been studied at 40.0 {^{\circ}C}. The extended (two-term) Grunwald-Winstein equation has been applied to the specific rates of solvolysis of npropyl fluoroformate. The sensitivities (l = 1.80 ${\pm}$ 0.17 and m = 0.96 ${\pm}$ 0.10) to changes in solvent nucleophilicity and solvent ionizing power and the $k_F/k_{Cl}$ values are similar to those for solvolyses of n-octyl fluoroformate over the full range of solvents, suggesting that the addition step of an addition-elimination mechanism is ratedetermining. These observations are also compared with those previously reported for the corresponding chloroformate and fluoroformate esters.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2007년도 하계학술대회 논문집 Vol.8
• /
• pp.311-312
• /
• 2007

In this study, composite $BaSrTiO_3$ has been studied for high frequency device applications. Composite $Ba_{0.5}Sr_{0.5}TiO_3$ has high dielectric permittivity and low loss tangent at the relative frequency range from MHz to GHz. 10,30 and 50 wt% of epoxy doped $Ba_{0.5}Sr_{0.5}TiO_3$ powders were prepared with bisphenol A and F polymer employing ball milling process. Epoxy/($BaSrTiO_3$) composites thick films were screen printed on the Cu plated PCB substrates through screen printing methods. The specimens were designed for the embedded capacitor applications. Temperature dependent dielectric permittivity of Epoxy doped $BaSrTiO_3$ ceramics was measured.

• 대한인간공학회:학술대회논문집
• /
• 대한인간공학회 1994년도 춘계학술대회논문집
• /
• pp.49-51
• /
• 1994

The aims of this study were first to determine the influence of vibration displacement amplitude $(200{\mu}m, 300{\mu}m peak-to-peak)$ at selected frequencies (40-200Hz) on a commonly observed but often undesired motor response elicited bylocal vibratory stimulation, the Tonic Vibration Reflex (TVR). Second, to determine the degree of synchronization of motor unit (MU) activity with vibratory stimuli. Vibration was applied to the distal tendons of the hand flexor muscles. Changes in root- mean-square electromyographic (EMG) activity of the finger and wrist flexor muscles were analyzed both as a function of their initial contraction level (0%, 10%, 20% of the maximal voluntarycontraction: MVC) and as a function of the vibration parameters. The results indicate that the TVR increased with the initial muscle contraction up to 10% MVC: The TVR increased with vibration frequency up to 100-150 Hz and decreases beyond; A significant increase of the TVR with vibration displacement amplitude was observed only for the wrist flexor muscle; MU synchronization at vibration frequency (VF) was found more often in the low frequency range $(f{\leq}100 Hz)$ and tended todecrease beyond; In the high frequency range $(f{\geq}120 Hz)$, MU activity at subharmonic frequency was predominant; The "cut-off" frequency of the synchronization with VF was neither affected by the vibration displacement amplitude nor initial muscle contraction level. The surface EMG turned out to be a useful means to analyze MU synchronization since it is noninvasive, and it can be easily used for analysis of different muscle contraction levels, while single MU technique might have some difficulties at high muscle contraction levels. Furthermore, these results indicate that high frequencyvibration (f>150 Hz) tends to induce less muscle/tendon stress and MU synchronization. Such remarks are of importance for the design of hand-held vibrating tools.ing tools.

• 지역사회간호학회지
• /
• 제28권2호
• /
• pp.156-164
• /
• 2017

Purpose: The purpose of this study is to investigate the level of pain, gait speed, and ROM (Range of motion) in community-dwelling older adults with knee joint pain. Methods: A convenience sample of 160 participants living in G city were recruited. Elderly people who suffer from knee joint pain with a pain level ${\geq}5$ during the last one year on a visual analogue scale were included in the study. The data were collected from June to August 2016. All statistical analyses were performed using IBM SPSS ver. 22.0. Results: Participants' pain was 6.81 by VAS. The mean gait speed was 13.9 sec/10m. The ROM of left knee and right knee were $54.06^{\circ}$ and $56.50^{\circ}$, respectively. The level of pain was different according to gender (t=-4.87, p<.001), economic status (t=3.51, p=.032), diseases (t=5.23, p<.001), diagnosis of arthritis (t=3.86, p<.001), region of knee joint pain (F=9.30, p<.001), duration of pain occurrence (F=13.82, p<.001), and limp (F=3.58, p<.001). The level of knee joint pain and gait speed had significant correlations. Conclusion: The gait speed in older adults is an important variable that should be taken into account in the assessment of their level of knee joint pain.

• 한국표면공학회지
• /
• 제48권3호
• /
• pp.82-86
• /
• 2015

$Dy^{3+}$- and $Eu^{3+}$-codoped $CaMoO_4$ Phosphors were synthesized by using the solid-state reaction method. The crystal structure, morphology, and optical properties of the resulting phosphor particles were investigated by using the X-ray diffraction, field-emission scanning electron microscopy, and photoluminescence spectroscopy. XRD patterns exhibited that all the synthesized phosphors showed a tetragonal system with a main (112) diffraction peak, irrespective of the content of $Eu^{3+}$ ions. As the content of $Eu^{3+}$ ions increased, the grains showed a tendency to agglomerate. The excitation spectra of the synthesized powders were composed of one strong broad band centered at 305 nm in the range of 220 - 350 nm and several weak peaks in the range of 350 - 500 nm resulting from the 4f transitions of activator ions. Upon ultraviolet excitation at 305 nm, the yellow emission line due to the $^4F_{9/2}{\rightarrow}^6H_{13/2}$ transition of $Dy^{3+}$ ions and the main red emission spectrum resulting from the $^5D_0{\rightarrow}^7F_2$ transition of $Eu^{3+}$ ions were observed. With the increase of the content of $Eu^{3+}$, the intensity of the yellow emission band gradually decreased while that of the red emission increased. These results indicated that the emission intensities of yellow and red emissions could be modulated by changing the content of the $Dy^{3+}$ and $Eu^{3+}$ ions incorporated into the host crystal.

• 한국운동역학회지
• /
• 제26권4호
• /
• pp.433-441
• /
• 2016

Objective: The purpose of this study was to understand the injury mechanism and to provide quantitative data to use in prevention or posture correction training by conducting kinematic and kinetic analyses of risk factors of lower extremity joint injury depending on the change of direction at different angles after a landing motion. Method: This study included 11 men in their twenties (age: $24.6{\pm}1.7years$, height: $176.6{\pm}4.4cm$, weight: $71.3{\pm}8.0kg$) who were right-leg dominant. By using seven infrared cameras (Oqus 300, Qualisys, Sweden), one force platform (AMTI, USA), and an accelerometer (Noraxon, USA), single-leg drop landing was performed at a height of 30 cm. The joint range of motion (ROM) of the lower extremity, peak joint moment, peak joint power, peak vertical ground reaction force (GRF), and peak vertical acceleration were measured. For statistical analysis, one-way repeated-measures analysis of variance was conducted at a significance level of ${\alpha}$ <.05. Results: Ankle and knee joint ROM in the sagittal plane significantly differed, respectively (F = 3.145, p = .024; F = 14.183, p = .000), depending on the change of direction. However, no significant differences were observed in the ROM of ankle and knee joint in the transverse plane. Significant differences in peak joint moment were also observed but no statistically significant differences were found in negative joint power between the conditions. Peak vertical GRF was high in landing (LAD) and after landing, left $45^{\circ}$ cutting (LLC), with a significant difference (F = 9.363, p = .000). The peak vertical acceleration was relatively high in LAD and LLC compared with other conditions, but the difference was not significant. Conclusion: We conclude that moving in the left direction may expose athletes to greater injury risk in terms of joint kinetics than moving in the right direction. However, further investigation of joint injury mechanisms in sports would be required to confirm these findings.

• 한국응용과학기술학회지
• /
• 제38권6호
• /
• pp.1709-1721
• /
• 2021

본 연구는 간호대학생의 진로정체감과 진로의사결정유형이 진로준비행동에 미치는 영향을 파악하기 위해 시행하였다. 연구대상자는 J도 소재 3,4학년 간호대학생 198명으로, 2021년 6월 14일부터 6월 27일까지 온라인 설문지를 이용하여 자료를 수집하였다. 자료는 SPSS/WIN 23.0 프로그램을 이용하여 기술통계, 독립 t-test, one-way ANOVA, Pearson's correlation, Hierarchical regression으로 분석하였다. 연구결과, 진로정체감 2.79점(범위 1~4), 합리적 유형 3.78점(범위 1~5), 직관적 유형 3.38점(범위 1~5), 의존적 유형 3.01점(범위 1~5), 진로준비행동 3.51점(범위 1~5)이었다. 진로준비행동은 진로정체감(r=.40, p<.001), 합리적 유형(r=.50, p<.001), 직관적 유형(r=.22, p=.002)과 양의 상관관계가 있었고, 의존적 유형(r=-.20, p=.004)과는 음의 상관관계가 있었다. 진로준비행동에 영향을 미치는 요인은 진로정체감(β=.23, p=.001), 합리적 유형(β=.31, p<.001), 직관적 유형(β=.27, p<.001), 의존적 유형(β=-.20, p=.002)으로 나타났다. 이 변수들은 진로준비행동을 24.6%p 설명하였다(F=11.93, p<.001). 본 연구결과를 바탕으로 간호대학생의 진로준비행동을 향상시키기 위해서 진로정체감 확립과 진로의사결정 유형에 따른 진로지도를 포함시킨 프로그램 개발 및 적용을 제안한다.