• International Journal of Highway Engineering
• /
• v.19 no.1
• /
• pp.45-52
• /
• 2017

PURPOSES : The main purpose of this study is to develop a high elastic modulus and low-shrinkage roller-compacted concrete base (RCCB) in order to prevent fatigue cracking and reflective cracking in the asphalt surface layer of composite pavement. Using a rigid base material with low shrinkage can be a solution to this problem. Moreover, a strong rigid base with high elastic modulus is able to shift the location of critical tensile strain from the bottom of the asphalt layer to the bottom of the rigid base layer, which can prevent fatigue cracking in the asphalt layer. METHODS : Sensitivity analysis of composite pavement via numerical methods is implemented to determine an appropriate range of elastic modulus of the rigid base that would eliminate fatigue cracking. Various asphalt thicknesses and elastic moduli of the rigid base are used in the analysis to study their respective influences on fatigue cracking. Low-shrinkage RCC mixture, as determined via laboratory testing with various amounts of a CSA expansion agent (0%, 7%, and 10%), is found to achieve an appropriate low-shrinkage level. Shrinkage of RCC is measured according to KS F 2424. RESULTS : This study shows that composite pavements comprising asphalt thicknesses of (h1) 2 in. with E2 > 19 GPa, 4 in. with E2 > 15 GPa, and 6 in. with E2 > 11 GPa are able to eliminate tensile strain in the asphalt layer, which is the cause of fatigue cracking in this layer. Shrinkage test results demonstrate that a 10% CSA RCC mixture can reduce shrinkage by 84% and 93% as compared to conventional RCC and PCC, respectively. CONCLUSIONS : According to the results of numerical analyses using various design inputs, composite pavements are shown to be able to eliminate fatigue cracking in composite pavement. Additionally, an RCC mixture with 10% CSA admixture is able to reduce or eliminate reflective cracking in asphalt surfaces as a result of the significant shrinkage reduction in the RCC base. Thus, this low-shrinkage base material can be used as an alternative solution to distresses in composite pavement.

• Journal of Veterinary Clinics
• /
• v.22 no.4
• /
• pp.392-395
• /
• 2005

A three-year old intact female German shepherd dog weighing 32kg was presented with the history of regurgitation and vomiting. Physical examination revealed a thin body condition, hoarse voice, hypersalivation, and pelvic limb weakness. In radiograph, meagaesophagus was identified. The neostigmine challenge test was positive. The titer of acetylcholine receptor (AChR) antibody was 1.58 nmol/L (reference range, <0.6nmol). Therefore, the dog was diagnosed to be suffering with chronic generalized form of acquired myasthenia gravis and followed by treatment with pyridostigmine bromide, 1mg/kg, q12 hrs. Treatment improved the pelvic limb weakness, however intermittent regurgitation and vomiting persisted. This resulted in aspiration pneumonia f3r which antibiotics were administered However, the dog was euthanized due to poor management and owner's request.

• Asian-Australasian Journal of Animal Sciences
• /
• v.15 no.5
• /
• pp.751-756
• /
• 2002

A study was carried out to evaluate the incidences and causes of bovine mastitis in Tanzanian shorthorn zebu (Bos indicus) in the traditional sector and crossbred cows (Bos taurus${\times}$Bos indicus) in the dairy ranching sector, both found under the extensive range management system. Management practices were evaluated through a survey study using structured questionnaires. A total of 120 lactating cows (60 cows from each sector) were screened for the disease using the California Mastitis Test (CMT). Confirmatory tests used for infected cows included; the Direct Microscopic Somatic Cell Count (DMSCC), culture, bacteriological and biochemical laboratory assays. Survey results showed that management practices were generally very poor in both sectors with 84% of the surveyed herds being kept and milked under very unhygienic environmental conditions. The level of infection was higher in the crossbred cows (5% clinical and 38.3% sub-clinical mastitis) and lower in the zebu cows with only sub-clinical mastitis (23.3%). Crossbred cows had (p<0.05) higher somatic cell counts than zebu cows. The four highest-ranking bacterial isolates in order of importance were Staphylococcus aureus, Escherichia coli, Streptococcus agalactiae and Bacillus spp. It was concluded that bovine mastitis under the extensive management system in Tanzania was a result of poor management practices and that zebu cows were more resistant to the diseases than crossbred cows.

• Journal of Korean Neurosurgical Society
• /
• v.59 no.5
• /
• pp.512-517
• /
• 2016

Objective : The pathophysiology of idiopathic Chiari malformation (CM) type 1 is disturbance of free cerebrospinal fluid (CSF) flow and restoration of normal CSF flow is the mainstay of treatment. Additional migration of the medulla oblongata in pediatric patients is referred to as CM type 1.5, but its significance in adult patients is unknown. This study is to compare surgical outcomes of adult idiopathic CM type 1.5 with that of type 1. Methods : Thirty-eight consecutive adult patients (M : F=11 : 27; median, 33.5; range, 18-63) with syringomyelia due to idiopathic CM type 1 were reviewed. Migration of the medulla oblongata was noted in 13 patients. The modified McCormick scale (MMS) was used to evaluate functional status before and one year after surgery. All patients underwent foramen magnum decompression and duroplasty. Factors related to radiological success (${\geq}50%$ decrease in the diameter of the syrinx) were investigated. The follow-up period was $72.7{\pm}55.6$ months. Results : Preoperative functional status were MMS I in 11 patients and MMS II in 14 of CM type 1 and MMS I in 8 and II in 5 of CM type 1.5. Of patients with MMS II, 5/14 patients in group A and 3/5 patients in group B showed improvement and there was no case of deterioration. Radiological success was achieved in 32 (84%) patients and restoration of the cisterna magna (p=0.01; OR, 46.5) was the only significant factor. Conclusion : Migration of the medulla oblongata did not make a difference in the surgical outcome when the cisterna magna was restored.

• Korean Journal of Bronchoesophagology
• /
• v.13 no.1
• /
• pp.33-38
• /
• 2007

Background and Objectives: A plunging ranula represents a mucus escape reaction occuring because of the disruption of the sublingual salivary gland. It is commonly a condition of young adults, although the reported age range is 6-43 years. There is said to be a slightly female preponderance of about 1.9:1(F:M). Surgical incision has been considered the definite treatment, but sometimes complete excision is very difficult. Non-surgical treatment of these lesions has been attempted, but the results have not been satisfactory. In this study, we present our experiences with picibanil (OK-432) sclerotherapy for a plunging ranula. Materials and Methods: We retrospectively reviewed 41 patients who have undergone sclerotherapy with picibanil for plunging ranula. Information was collected on age, sex, a number of injection, post-sclerotherapy side effect and outcome of treatment. Results: 17 patients (41.5%) showed a complete response, and 20 patients (48.7%) showed inter-mediate response. No response was seen in 4 patients (9.8%). As a side effect of intracystic OK-432 injection therapy, fever (26.8%) and pain(39.0%) were observed. However, fever and pain disappeared after several days in all cases. Conclusion: The results are showing that OK-432 injection is an effective and safe treatment for plunging ranula.

• Korean Journal of Materials Research
• /
• v.19 no.5
• /
• pp.245-252
• /
• 2009

Changes in the surface morphology and light scattering of textured Al doped ZnO thin films on glass substrates prepared by rf magnetron sputtering were investigated. As-deposited ZnO:Al films show a high transmittance of above 80% in the visible range and a low electrical resistivity of $4.5{\times}10^{-4}{\Omega}{\cdot}cm$. The surface morphology of textured ZnO:Al films are closely dependent on the deposition parameters of heater temperature, working pressure, and etching time in the etching process. The optimized surface morphology with a crater shape is obtained at a heater temperature of $350^{\circ}C$, working pressure of 0.5 mtorr, and etching time of 45 seconds. The optical properties of light transmittance, haze, and angular distribution function (ADF) are significantly affected by the resulting surface morphologies of textured films. The film surfaces, having uniformly size-distributed craters, represent good light scattering properties of high haze and ADF values. Compared with commercial Asahi U ($SnO_2$:F) substrates, the suitability of textured ZnO:Al films as front electrode material for amorphous silicon thin film solar cells is also estimated with respect to electrical and optical properties.

• Korean Journal of Community Nutrition
• /
• v.8 no.6
• /
• pp.977-985
• /
• 2003

This study was done to evaluate the health and nutritional status of female college students in Seoul. The subjects were 63 healthy college students aged 20 to 29 years. Their body composition, dietary intakes, clinical blood indices were investigated. Their body composition was determined by means of a multifreqency bioelectrical impedance analysis. Their dietary intake was determined using 3-day record method and their nutrient intake was analyzed by Computer Aided Nutritional analysis program for professional (CAN-pro). Their hemoglobin, hematocrit, red blood cell (RBC), white blood cell (WBC) and mean corpuscular volume (MCV) were determined by semi-automated microcell counter (F-520). Their plasma total cholesterol, TG, and HDL-cholesterol levels were measured using test kits. All data were statistically analyzed by SAS PC package program. Their average consumption of calcium, iron vitamin A, vitamin B2 and niacin were 63.3%, 65.0%, 85.2%, 89.2% and 95.2% of RDA, respectively. The overall mean values of the hematological indices in the female college students were within the normal range. However anemic subjects with hemoglobin (< 12 g/dl) and hematocrit (<36%) accounted for about 20% of the subjects. The mean levels of total cholesterol, HDL-cholesterol and TG were 188.4mg/dl, 69.9mg/dl and 67.4mg/dl, respectively. The percentages of the subjects with plasma total cholesterol level (> 200mg/dl) and LDL-cholesterol (＞130mg/dl) were about 41% and 30.4%, respectively. The data showed a significantly positive correlation between either body fat (%) or BMI and TG. However. there was a significantly negative correlation between either body fat (%) or BMI and HDL-cholesterol. These overall results suggest that it is necessary for college women to be educated regarding consuming more iron and vitamin C and less fat, in order to prevent iron deficiency anemia and/or cardiovascular diseases in later life.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.413-414
• /
• 2008

We have studied an organic layer thickness dependent optical properties and microcavity effects for top-emission organic light-emitting diodes. Manufactured top emission device, structure is Al(100nm)ITPD(xnm)/$Alq_3$(ynm)/LiF(0.5nm)/Al(23nm). While a thickness of hole-transport layer of TPD was varied from 35 to 65nm, an emissive layer thickness of $Alq_3$ was varied from 50 to 100nm for two devices. A ratio of those two layers was kept to about 2:3. Variation of the layer thickness changes a traverse time of injected carriers across the organic layer, so that it may affect on the chance of probability of exciton formation. View-angle dependent emission spectra were measured for the optical measurements. Top-emission devices show that the emission peak wavelength shifts to longer wavelength as the organic layer thickness increases. For instance, it shifts from 490 to 555nm in the thickness range that we used. View-angle dependent emission spectra show that the emission intensity decreases as the view-angle increases. The organic layer thickness-dependent emission spectra show that the full width at half maximum decreases as the organic layer thickness increases. Top emission devices show that the full width at half maximum changes from 90 to 35nm as the organic layer thickness increases. In top-emission device, the microcavity effect is more vivid as the organic layer thickness increases.

• Proceedings of the KIEE Conference
• /
• 1998.07g
• /
• pp.2544-2546
• /
• 1998

The electrical and physical charateristics of Pt-Co alloy thin films on $Al_2O_3$ substrate, deposited by r.f cosputtering respectively, were analyzed with thickness of thin films ($1700{\sim}10000{\AA}$) and increasing annealing temperature ($800{\sim}1000^{\circ}C$). At input power of Pt : 4.4 W/$cm^2$, Co : 6.91 W/$cm^2$, working vacuum of 10 mTorr and annealing conditions of $1000^{\circ}C$) and 60 min, the resistivity and sheet resistivity of Pt-Co thin films with thickness of $3000{\AA}$ was $15{\mu}{\Omega}{\cdot}cm$ and 0.5 ${\Omega}/{\square}$, respectively. The TCR value of Pt-Co alloy thin films was measured with various thickness of thin films and annealing conditions. The optimum TCR value of 3850 ppm/$^{\circ}C$ in temperature range($200{\sim}400^{\circ}C$) is gained under conditions $3000{\AA}$ of thin films thickness and $1000^{\circ}C$ of annealing temperature. The thermal charateristics of Pt-Co micro heaters were analysed with Pt-Co RTD integrated on the same substrate. In the analysis of characteristics of Pt-Co micro heaters, the Pt-Co micro heaters with thickness of $3000{\AA}$ and annealing temperature of $1000^{\circ}C$ had a good linearity and temperature is up to $468.2^{\circ}C$ with 2.1 watts of the heating power.

• Journal of the Semiconductor & Display Technology
• /
• v.7 no.1
• /
• pp.1-5
• /
• 2008

In this paper, we fabricated pressure difference type gas flow sensor using only dry etching technology by ICP-RIE(inductive coupled plasma reactive ion etching). The sensor's structure consists of a common shear stress type piezoresistive pressure sensor with an orifice fabricated in the middle of the sensor diaphragm. Generally, structure like diaphragm is fabricated by wet etching technology using TMAH, but we fabricated diaphragm by only dry etching using ICP-RIE. To equalize the thickness of diaphragm we applied insulator($SiO_2$) layer of SOI(Si/$SiO_2$/Si-sub) wafer as delay layer of dry etching. Size of fabricated diaphragm is $1000{\times}1000{\times}7\;{\mu}m^3$ and overall chip $3000{\times}3000{\times}7\;{\mu}m^3$. We measured the variation of output voltage toward the change of gas pressure to analyze characteristics of the fabricated sensor. Sensitivity of fabricated sensor was relatively high as about 1.5mV/V kPa at 1kPa full-scale. Nonlinearity was below 0.5%F.S. Over-pressure range of the fabricated sensor is 100kPa or more.