• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.17 no.10
• /
• pp.1074-1080
• /
• 1992

A(5,8) block binary line code is proposed. The new line code called MB58 has the properties of being dc-free and runlength-limited, and it is strictly bandwidth-limited to the Nyquist frequency, such that bandwidth efficiency is improved. This new code is a memoryless code with a simple decoding rule and capability of error monitoring. The power spectrum and the eye pattern of the new code are obtained by simulation, wherein spectral nulls at DC(f=0) and Nyquist frequency (f=1/2Ts) are clearly identified.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.10 s.352
• /
• pp.1-9
• /
• 2006

In this paper, a couple of 10Gb/s transimpedance amplifiers are realized in a 0.18um standard CMOS technology for optical communication applications. First, the voltage-mode inverter TIA(I-TIA) exploits inverter input configuration to achieve larger effective gm, thus reducing the input impedance and increasing the bandwidth. I-TIA demonstrates $56dB{\Omega}$ transimpedance gain, 14GHz bandwidth for 0.25pF photodiode capacitance, and -16.5dBm optical sensitivity for 0.5A/W responsivity, 9dB extinction ration and $10^{-12}$ BER. However, both its inherent parasitic capacitance and the package parasitics deteriorate the bandwidth significantly, thus mandating very judicious circuit design. Meanwhile, the current-mode RGC TIA incorporates the regulated cascade input configuration, and thus isolates the large input parasitic capacitance from the bandwidth determination more effectively than the voltage-mode TIA. Also, the parasitic components give much less impact on its bandwidth. RGC TIA provides $60dB{\Omega}$ transimpedance gain, 10GHz bandwidth for 0.25pF photodiode capacitance, and -15.7dBm optical sensitivity for 0.5A/W responsivity, 9dB extinction ration and $10^{-12}$ BER. Main drawback is the power dissipation which is 4.5 times larger than the I-TIA.

• Journal of the Institute of Electronics Engineers of Korea SD
• /
• v.43 no.4 s.346
• /
• pp.16-22
• /
• 2006

Gigabit transimpedance amplifiers are realihzed in submicron CMOS technologies for Gigabit Ethernet applications. The regulated cascode technique is exploited to enhance the bandwidth and noise performance simultaneously so that it can isolate the large input parasitic capacitance including photodiode capacitance from the determination of the bandwidth. The 1.25Gb/s TIA implemented in a 0.6um CMOS technology shows the measured results of 58dBohm transimpedance gain, 950MHz bandwidth for a 0.5pF photodiode capacitance, 6.3pA/sqrt(Hz) average noise current spectral density, and 85mW power dissipation from a single 5V supply. In addition, a 10Gb/s TIA is realized in a 0.18um CMOS incorporating the RGC input and the inductive peaking techniques. It provides 59.4dBohm transimpedance gain, 8GHz bandwidth for a 0.25pF photodiode capacitance, 20pA/sqrt(Hz) noise current spectral density, and 14mW power consumption for a single 1.8V supply.

• The Journal of the Acoustical Society of Korea
• /
• v.25 no.3
• /
• pp.137-143
• /
• 2006

The aim of this paper is to investigate the prosodic characteristics of Korean distant speech. Four speakers (2 males and 2 females) produced 36 2-syllable words in both distant-talking and normal environments. totaling 288 spoken 2-syllable words. The results showed that ratios of second syllable to first syllable in vowel duration and vowel energy were significantly larger in the distant-talking environment compared to the normal environment and f0 range also bigger in the distant-talking environment. In addition, 'HL%' contour boundary tone in the second syllable and/or 'L+H' contour tone in the first syllable were used in the distant-talking environment.

• The KIPS Transactions:PartC
• /
• v.9C no.3
• /
• pp.385-398
• /
• 2002

To accommodate the increasing number of mobile terminals in the limited radio spectrum, wireless systems have been designed as micro/picocellular architectures for a higher capacity. This reduced coverage area of a cell has caused a higher rate of hand-off events, and the hand-off technology for efficient process becomes a necessity to provide a stable service. Population-based Bandwidth Reservation(PBR) Scheme is proposed to provide prioritized handling for hand-off calls by dynamically adjusting the amount of reserved bandwidth of a cell according to the amount of cellular traffic in its neighboring cells. We analyze the performance of the PBR scheme according to the changes of a fractional parameter, f, which is the ratio of request reservation to the total amount of bandwidth units required for hand-off calls that will occur for the next period. The vague of this parameter, f should be determined based on QoS(Quality of Service) requirement. To meet the requirement the value of Parameter(f) must be able to be adjusted dynamically according to the changing traffic conditions. The best value of f can be determined by a function of the average speed of mobile stations, average call duration, cell size, and so on. This paper considers the average call duration and the cell size according to the speed of mobile stations. Although some difference exists as per speed, in the range of 0.4 $\leq$ f $\leq$ 0.6, Blocking Probability, Dropping Probability and Utilization show the best values.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.15 no.7
• /
• pp.565-573
• /
• 1990

In this paper, optimum bandwidth at BbT=0.25 was simulated uisng the formular of S.Elnoubi, who analyzed effect of receiving bandpass filter of discriminator type GMSK modem under static and fast Rayleigh fading channel which is applicable to land mobile channel environment, and measured with experimental system. The experimental results were well agreed with the simulation. The result shows that filter bandwidth is optimal at BrT=0.7 under static fading(fDT=0), while the performance is less sensitive to the bandwidth as Eb/No and fading rate fDT bacome higher.

• The Journal of the Acoustical Society of Korea
• /
• v.9 no.3
• /
• pp.48-55
• /
• 1990

We analyze the effect of second-order sampling on estimating the mean frequency of the Doppler signal. In order to reduce the sampling frequency of analogue-to-digital converter, it is possible to obtain the Doppler signal by sampling the radio frequency echo signal with the low frequence of $4f_0$/5 or $4f_0$/9 instead of $4f_0$, where $f_0$ is the center frequency of the transmitted signal. The computer simulation and experiments show that if the narrowband signal is transmitted as is usual in the Doppler system, the error of the mean frequency estimates due to the low sampling frequency is negligible.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.12 no.1
• /
• pp.39-45
• /
• 2008

In this parer a branch type inverted-F structure antenna with dual-band is proposed. The proposed antenna has a size of about $70mm{\times}35mm{\times}0.8mm$ with a total mobile phone PCB for support and patch of about $12mm{\times}8mm{\times}0.8mm$. This antenna is designed to operate of frequency 2.45GHz and 5.8GHz, Bandwidth at each other frequency is satisfied $83MHz{\sim}100MHz$ in frequencies. Also, The designed and fabricated dual-band antenna for 2.45GHz, 5.8GHz have a gain between 2.0dBi and -1.0dBi at all bands.

• Journal of the Korean Institute of Telematics and Electronics A
• /
• v.29A no.8
• /
• pp.10-17
• /
• 1992

A new line code design technique based on the BUDA(Binary Unit DSV and ASV) concept is introduced. The new line code called MB34 and designed by this new technique is of the minimum bandwidth, dc-free, and runlength limited. To confirm the performance of the new code, its power spectrum and eye pattern are obtained, wherein spectral nulls at dc(f=0) and Nyguist frequency (f=1/2Ts) are clearly identified. It is also discussed how the transmission errors can be detected by monitoring the DSV, the ASV, and the runlength.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.13 no.7
• /
• pp.625-632
• /
• 2002

In this paper, a wide band modified inverted-F type antenna printed on a high dielectric ceramic material is designed and fabricated. This antenna is designed to have optimum antenna characteristics analyzing the effects of design parameters such as printed antenna pattern, ceramic dielectric material dimension and dielectric constant on antenna characteristics using the commercial simulation tool HFSS. The fabricated antenna's width, length and height are 8 mm, 8 mm and 3 mm, respectively. Measurement results show that it has -10 dB bandwidth of 270 MHz which satisfies the IMT-2000 bandwidth required for handset and that its maximum radiation gain is 2 dBi.