• Journal of the Korean Wood Science and Technology
• /
• v.2 no.2
• /
• pp.5-7
• /
• 1974

1. This study indicates that above the fiber saturation point the drying rate can be increased with increasing the velocity of the air circutation, i.e., the drying rate of sample boards is proportional to the air velocity, but below the fiber saturation point, the effect of the velocity of air circulation is very low as shown in Figs. 1 and 2. 2. Under the controlled temperature and humidity in the kiln, the more the sample boards have moisture, the higher drying rate of it can be obtained. In other words, this means that even though in the case of drying various moisture content of wood, at the final drying stage, approximately the same percentage of moisture content of wood can be secured by employing the higher velocity of air circulation. 3. This study shows that the rate of drying in kiln changes distinctly at the fiber saturation point, i, e., above the fiber saturation point, the drying curve shows concave aginst the X axsis, but below the fiber saturation point, in the range from 30 percent of moisture content to 20 percent of moisture content, the curve shows convex as shown in Fig. 3. As the drying progresses, however, the drying curve shows concave again below 20 percent of moisture content. This means that inflection point of drying curve may be located clearly at the fiber saturation point, i.e., 30 percent of moisture content. As mentioned above, the 30 percent of moisture content of wood at which the inflectional point appears can be recognized as a critical point, i. e., the fiber saturation point at which all free water was removed from wood. The existence of inflectional point indicates that the evaporation of hygroscopic water in a cell wall is more difficult than the evaporation of free water in a cell cavity and the minor space of cell wall. The convex curve in the range of moisture content from 30 percent to 20 percent means that the evaporation of capillary condensed water has a tendency of the same rates of drying approximately, but as approaching to the 20 percent of moisture, the transfusion of moisture from wood becomes difficult because of having less moisture in cell wall. Below 20 percent of moisture content, the drying curve shows concave again, which means that it is difficult to remove the moisture located nearer to the surface of cellulose molecules and the surface bound water. These relations were revealed in Fig. 4. In comparison AC curve which does not have the two inflection points with BD curve which has two inflection points, i.e., Band D, they are mentioned already, by existence of the inflection points, the curve BD shows that the change of drying rate in the interval from 20 percent of moisture content to 30 percent of moisture content is not greater than in the case of the curve AC in the same interval. At the inflection point of 30 percent of moisture content, it can be noticed that the changing of the drying rate is very conspicuous. This phenomenon also can be recognized, as it is noticed by the Fig. 3, the drying rate from green to 30 percent of moisture content is very great. But the inclination of the curve is very slow from 30 percent of moisture content to 20 percent of moisture content, i.e., the inclination of the curve becomes almost horizontal lines. Acknowledgments Gratitude is expressed to Fred E. Dickinson, Professor of 'Wood Technology, School of Natural Resources, University of Michigan, USA for his suggestion to carry out this study.

• The Korean Journal of Nuclear Medicine Technology
• /
• v.18 no.1
• /
• pp.43-48
• /
• 2014

Purpose: In the PET/CT images, The SUV (standardized uptake value) enables the quantitative assessment according to the biological changes of organs as the index of distinction whether lesion is malignant or not. Therefore, It is too important to enter parameters correctly that affect to the SUV. The purpose of this study is to evaluate an allowable error range of SUV as measuring the difference of results according to input errors of Activity, Weight, uptake Time among the parameters. Materials and Methods: Three inserts, Hot, Teflon and Air, were situated in the 1994 NEMA Phantom. Phantom was filled with 27.3 MBq/mL of 18F-FDG. The ratio of hotspot area activity to background area activity was regulated as 4:1. After scanning, Image was re-reconstructed after incurring input errors in Activity, Weight, uptake Time parameters as ${\pm}5%$, 10%, 15%, 30%, 50% from original data. ROIs (region of interests) were set one in the each insert areas and four in the background areas. $SUV_{mean}$ and percentage differences were calculated and compared in each areas. Results: $SUV_{mean}$ of Hot. Teflon, Air and BKG (Background) areas of original images were 4.5, 0.02. 0.1 and 1.0. The min and max value of $SUV_{mean}$ according to change of Activity error were 3.0 and 9.0 in Hot, 0.01 and 0.04 in Teflon, 0.1 and 0.3 in Air, 0.6 and 2.0 in BKG areas. And percentage differences were equally from -33% to 100%. In case of Weight error showed $SUV_{mean}$ as 2.2 and 6.7 in Hot, 0.01 and 0.03 in Tefron, 0.09 and 0.28 in Air, 0.5 and 1.5 in BKG areas. And percentage differences were equally from -50% to 50% except Teflon area's percentage deference that was from -50% to 52%. In case of uptake Time error showed $SUV_{mean}$ as 3.8 and 5.3 in Hot, 0.01 and 0.02 in Teflon, 0.1 and 0.2 in Air, 0.8 and 1.2 in BKG areas. And percentage differences were equally from 17% to -14% in Hot and BKG areas. Teflon area's percentage difference was from -50% to 52% and Air area's one was from -12% to 20%. Conclusion: As shown in the results, It was applied within ${\pm}5%$ of Activity and Weight errors if the allowable error range was configured within 5%. So, The calibration of dose calibrator and weighing machine has to conduct within ${\pm}5%$ error range because they can affect to Activity and Weight rates. In case of Time error, it showed separate error ranges according to the type of inserts. It showed within 5% error when Hot and BKG areas error were within ${\pm}15%$. So we have to consider each time errors if we use more than two clocks included scanner's one during the examinations.

• Progress in Medical Physics
• /
• v.22 no.3
• /
• pp.140-147
• /
• 2011

The purpose of this study was to estimate internal motion using molecular sieve for quantitative improvement of lung tumor and to localize lung tumor in the small animal PET image by evaluated data. Internal motion has been demonstrated in small animal lung region by molecular sieve contained radioactive substance. Molecular sieve for internal lung motion target was contained approximately 37 kBq Cu-64. The small animal PET images were obtained from Siemens Inveon scanner using external trigger system (BioVet). SD-Rat PET images were obtained at 60 min post injection of FDG 37 MBq/0.2 mL via tail vein for 20 min. Each line of response in the list-mode data was converted to sinogram gated frames (2~16 bin) by trigger signal obtained from BioVet. The sinogram data was reconstructed using OSEM 2D with 4 iterations. PET images were evaluated with count, SNR, FWHM from ROI drawn in the target region for quantitative tumor analysis. The size of molecular sieve motion target was $1.59{\times}2.50mm$. The reference motion target FWHM of vertical and horizontal was 2.91 mm and 1.43 mm, respectively. The vertical FWHM of static, 4 bin and 8 bin was 3.90 mm, 3.74 mm, and 3.16 mm, respectively. The horizontal FWHM of static, 4 bin and 8 bin was 2.21 mm, 2.06 mm, and 1.60 mm, respectively. Count of static, 4 bin, 8 bin, 12 bin and 16 bin was 4.10, 4.83, 5.59, 5.38, and 5.31, respectively. The SNR of static, 4 bin, 8 bin, 12 bin and 16 bin was 4.18, 4.05, 4.22, 3.89, and 3.58, respectively. The FWHM were improved in accordance with gate number increase. The count and SNR were not proportionately improve with gate number, but shown the highest value in specific bin number. We measured the optimal gate number what minimize the SNR loss and gain improved count when imaging lung tumor in small animal. The internal motion estimation provide localized tumor image and will be a useful method for organ motion prediction modeling without external motion monitoring system.

• Journal of Chest Surgery
• /
• v.40 no.4 s.273
• /
• pp.264-272
• /
• 2007

Background: Vascular endothelial growth factor (VEGF) plays an important role in angiogenesis, including stimulating the proliferation and migration of vascular smooth muscle cells (VSMCs). It has been known that diabetes is associated with accelerated cellular proliferation via VEGF, as compared to that under a normal glucose concentration. We investigated the effects of selective blockade of a VEGF receptor by using anti-Flt-1 peptide on the formation and hyperplasia of the neointima in balloon injured-carotid arteries of OLETF rats and also on the in vitro VSMCS' migration under high glucose conditions. Material and Method: The balloon-injury method was employed to induce neointima formation by VEGF. For f4 days beginning 2 days before the ballon injury, placebo or vascular endothelial growth factor receptor-1 (VEGFR-1) specific peptide (anti-Flt-1 peptide), was injected at a dose of 0.5mg/kg daily into the OLETF rats. At 14 days after balloon injury, the neointimal proliferation and vascular luminal stenosis were measured, and cellular proliferation was assessed by counting the proliferative cell nuclear antigen (PCNA) stained cells. To analyze the effect of VEGF and anti-Flt-1 peptide on the migration of VSMCs under a high glucose condition, transwell assay with a matrigel filter was performed. And finally, to determine the underlying mechanism of the effect of anti-Flt-1 peptide on the VEGF-induced VSMC migration in vitro, the expression of matrix metalloproteinase (MMP) was observed by performing reverse transcription-polymerase chain reaction (RT-PCR). Result: Both the neointimal area and luminal stenosis associated with neointimal proliferation were significantly decreased in the anti-Flt-1 peptide injected rats, ($0.15{\pm}0.04 mm^2$ and $ 36.03{\pm}3.78%$ compared to $0.24{\pm}0.03mm^2\;and\;61.85{\pm}5.11%$, respectively, in the placebo-injected rats (p<0.01, respectively). The ratio of PCNA(+) cells to the entire neointimal cells was also significantly decreased from $52.82{\pm}4.20%\;to\;38.11{\pm}6.89%$, by the injected anti-Flt-1 peptide (p<0.05). On the VSMC migration assay, anti-Flt-1 peptide significantly reduced the VEGF-induced VMSC migration by about 40% (p<0.01). Consistent with the effect of anti-Flt-1 peptide on VSMC migration, it also obviously attenuated the induction of the MMP-3 and MMP-9 mRNA expressions via VEGF in the VSMCS. Conclusion: Anti-Flt-1 peptide inhibits the formation and hyperplasia of the neointima in a balloon-injured carotid artery model of OLETF rats. Anti-Flt-1 peptide also inhibits the VSMCs' migration and the expressions of MMP-3 and MMP-9 mRNA induced by VEGF under a high glucose condition. Therefore, these results suggest that specific blockade of VEGFR-1 by anti-Flt-1 peptide may have therapeutic potential against the arterial stenosis of diabetes mellitus patients or that occurring under a high glucose condition.

• Tuberculosis and Respiratory Diseases
• /
• v.47 no.3
• /
• pp.356-364
• /
• 1999

Backgrounds: Previous reports have revealed a high morbidity and mortality in fatal asthma patients, especially those treated in the medical intensive care unit(MICU). But it has not been well known about the predictable factors for the mortality of fatal asthma(F A) with acute respiratory failure. In order to define the predictable factors for the mortality of FA at the admission to MICU, we analyzed the relationship between the clinical parameters and the prognosis of FA patients. Methods: A retrospective analysis of all medical records of 59 patients who had admitted for FA to MICU at a tertiary care MICU from January 1992 to March 1997 was performed. Results: Over all mortality rate was 32.2% and 43 patients were mechanically ventilated. In uni-variate analysis, the death group had significantly older age ($66.2{\pm}10.5$ vs. $51.0{\pm}18.8$ year), lower FVC($59.2{\pm}21.1$ vs. $77.6{\pm}23.3%$) and lower $FEV_1$($41.4{\pm}18.8$ vs. $61.l{\pm}23.30%$), and longer total ventilation time ($255.0{\pm}236.3$ vs. $98.1{\pm}120.4$ hour) (p<0.05) compared with the survival group (PFT: best value of recent 1 year). At MICU admission, there were no significant differences in vital signs, $PaCO_2$, $PaO_2/FiO_2$, and $AaDO_2$, in both groups. However, on the second day of MICU, the death group had significantly more rapid pulse rate ($121.6{\pm}22.3$ vs. $105.2{\pm}19.4$ rate/min), elevated $PaCO_2$ ($50.1{\pm}16.5$ vs. $41.8{\pm}12.2 mm Hg$), lower $PaO_2/FiO_2$, ($160.8{\pm}59.8$ vs. $256.6{\pm}78.3 mm Hg$), higher $AaDO_2$ ($181.5{\pm}79.7$ vs. $98.6{\pm}47.9 mm Hg$), and higher APACHE III score ($57.6{\pm}21.1$ vs. $20.3{\pm}13.2$) than survival group (p<0.05). The death group had more frequently associated with pneumonia and anoxic brain damage at admission, and had more frequently developed sepsis during disease progression than the survival group (p<0.05). Multi-variate analysis using APACHE III score and $PaO_2/FiO_2$, ratio on first and second day, age, sex, and pneumonia combined at admission revealed that APACHE III score (40) and $PaO_2/FiO_2$ ratio (<200) on second day were regarded as predictive factors for the mortality of fatal asthma (p<0.05). Conclusions: APACHE III score ($\geq$40) and $PaO_2/FiO_2$ ratio (<200) on the second day of MICU, which might reflect the response of treatment, rather than initially presented clinical parameters would be more important predictable factors of mortality in patients with FA.

• Journal of Animal Science and Technology
• /
• v.45 no.6
• /
• pp.917-922
• /
• 2003

This study was conducted to investigate effects of farm, type of sow Landrace${\times}$Yorkshire, LY; Yorkshire${\times}$ Landrace, YL; Yorkshire${\times}$Yorkshire, YY and multi-cross bred sow, MBS), parity, farrowing year, farrowing season and mating method on reproductive traits such as total number born per litter, number of born alive per litter, number of weaned per litter, number of mummified per litter, number of stillbirth. The Reproductive Records of 3,387 litters from January, 1999 to September, 2002 were obtained from four pig farms managed by Electronic Data Processing(EDP) system. Reproductive performances for two types of F1 Sows(YL and LY) were estimated as 11.34${\pm}$0.266 and 11.57${\pm}$0.263 heads for total number of born per litter, 10.56${\pm}$0.216 and 11.81${\pm}$0.251 heads for number of born alive per litter, and 10.05${\pm}$0.131 and 9.96${\pm}$0.153 heads for number of weaned per litter, respectively. These records are significantly higher(P〈0.05) than those of YY and MBS. However, number of mummified per litter, number of stillborn per litter, number of dead by diarrhea per litter, number of dead by other reasons during lactating period per litter and estrus interval did not show significant difference between types of sows. There were more total number of born per litter and number of weaned per litter in year 2001 than other year. As year passed, number of dead by crush per litter, number of dead by diarrhea per litter and number of dead by other reasons during lactating period per litter reduced from 0.18${\pm}$0.023 to 0.07${\pm}$0.022 head, 0.12${\pm}$0.21 to 0.02${\pm}$0.020 head and 0.43${\pm}$0.041 to 0.22${\pm}$0.040 head, respectively and weaning rate increased from 0.94${\pm}$0.005% to 0.97${\pm}$0.005%. The total number of born per litter and number of born alive per litter were higher(P〈0.05) in the case of mating twice than mating once. The number of weaned per litter, number of mummified per litter and number of stillborn per litter were not significant(P〈0.05) between mating methods. Estrus interval was shorter on the occasion of twice artificial insemination(5.24${\pm}$0.153days) than twice natural mating(6.51${\pm}$0.466days).

• Journal of dental hygiene science
• /
• v.12 no.4
• /
• pp.413-421
• /
• 2012

The main purpose of this study is to present practical data for the development of the health enhancing programs for the dental hygiene students. This data is based on the investigation of the psychosomatic self-reported symptoms of the dental hygiene students. Out of the random selection of the current dental hygiene students in Gyeonggi-do and Gangwon-do districts. We conducted a survey and analyzed the collected data from 432 respondents. The results are as follows: 1. The mental appeals (19.37) were higher then the physical appeals (17.53) and of the items in psychosomatic symptoms, the point of mental instability the highest (21.85); whereas, that of mouth and anal scored the lowest (14.59). 2. In terms of the religion, statistical significance was shown among physical appeals (p<.01), mental appeals (p<.05), multiple subjective symptom (p<.01), digestive organs (p<.01), aggressiveness (p<.01), nervousness (p<.01), and eye and skin (p<.05), mental instability (p<.05). 3. Concerning the living conditions, Statistical significance was found on the items such as physical appeals (p<.05), mental appeals (p<.01), depression (p<.001), irregular and life (p<.001), multiple subjective symptom (p<.01), lie scale (p<.01) and mouth and anal (p<.05), digestive organs (p<.05). 4. As for regular health check-ups, statistical significance was shown in the following items such as mental appeals (p<.05), depression (p<.01), multiple subjective symptom (p<.05), mental instability (p<.05).

• Asian-Australasian Journal of Animal Sciences
• /
• v.19 no.4
• /
• pp.593-600
• /
• 2006

The effects of breed and sex on individual growth performance and feeding behaviour were studied between 45 and 90 kg BW in two replicates of forty group-housed pigs. The first and the second replicates were carried out during the warm season (i.e. between February and April 2003) and during the hot season (i.e. between August and October 2003), respectively. During the warm season, ambient temperature and relative humidity averaged $25.3^{\circ}C$ and 86.0%. The corresponding values for the hot season were $27.9^{\circ}C$ and 83.6%. The pigs were grouped in pens of 10 animals on the basis of breed (Creole or Large White) and sex (gilt or castrated male) and given ad libitum access to a grower diet (9.0 MJ/kg net energy and 158 g/kg crude protein) via feed intake recording equipment (Acema 48). An ear-tag transponder was inserted into each pig and this allowed the time, duration, and size of individual visits to be recorded. The growth performance and feeding pattern were significantly affected by breed, sex, and season. The Creole pigs (CR) had a lower average daily gain (ADG) (642 vs. 861 g/d, p<0.01) and carcass lean content ($LC_{90kg}$) (35.4 vs. 54.5%; p<0.01) and a higher backfat thickness at 90 kg BW ($BT_{90kg}$) (23.4 vs. 10.4 mm; p<0.01) than Large White pigs (LW) whereas the average daily feed intake (ADFI) was not affected by breed (2.34 vs. 2.22 kg/d, respectively for CR and LW pigs; p>0.10). Consequently, the food:gain ratio was higher in CR than in LW (3.65 vs. 2.58; p<0.01). CR had less frequent meals but ate more feed per meal than LW (5.9 vs. 8.8 meals/d and 431 vs. 279 g/meal; p<0.01). The rate of feed intake was lower (27.6 vs. 33.9 g/min; p<0.01) and the ingestion time per day and per meal were higher in CR than in LW (87.1 vs. 69.7 min/d and 15.8 vs. 8.4 min/meal; p<0.01). The ADFI and BT90 kg were higher (2.38 vs. 2.17 kg/d and 18.1 vs. 15.9 mm; p<0.05) and LC90 kg was lower (43.5 vs. 46.4%; p<0.01) in castrated males (CM) than in gilts (G) whereas ADG was not affected by sex (p = 0.12). The difference in lean content between CM and G was greater in CR than in LW. The ADFI and ADG were reduced during the hot season (2.18 vs.2.38 kg/d and 726 vs. 777 g/d, respectively; p<0.05) whereas feed conversion and carcass lean content were not affected by season (p>0.05). Average feeding time per meal and meal size decreased during the hot season (10.9 vs. 13.2 min/meal and 316 vs. 396 g/meal; p<0.01) whereas the rate of feed intake was not affected by season (p = 0.83). On average, 0.69 of total feed intake was consumed during the diurnal period. However, this partition of feed intake was significantly affected by breed, sex, and season. In conclusion, the breed, sex and season significantly affect performance and feeding pattern in growing pigs raised in a tropical climate. Moreover, the results obtained in the present study suggest that differences observed in BW composition between CR and LW are associated with difference in feeding behaviour, in particular, the short-term regulation of feed intake.

• Food Science and Preservation
• /
• v.21 no.6
• /
• pp.790-798
• /
• 2014

The nutritional compositions and antioxidative activities of the Kimcheon lowbush and Pyungtaek highbush blueberries cultivated in South Korea were investigated. The approximate compositions, pH, and soluble-solid and mineral contents of P, Ca, Mg, Na, and Zn were determined. Both blueberry cultivars had mainly fructose and glucose as free sugars while disaccharides such as sucrose, maltose, and lactose were not detected in both. Oleic, linoleic, and linolenic fatty acids were the major fatty acids in both types of blueberries. The total of 16 free amino acids, including seven essential and nine non-essential amino acids, were higher in the Pyungtaek highbush blueberry. Among the amino acids, arginine was especially much higher in the Pyungtaek highbush blueberry. The anthocyanin, resveratrol, and polyphenol compounds, which are the important biologically active compounds in blueberries, were found. The anthocyanin contents of the Kimcheon lowbush and Pyungtaek highbush blueberries were 22.0 and 18.1 mg/100 g, respectively; the resveratrol contents by HPLC, 0.12 and 0.11 mg/100 g; and the total polyphenol contents, 141.3 and 138.4 mg/100 g. The electron-donating ability determined based on the DPPH radical scavenging activity was increased in a concentration-dependent manner, and it was higher than that of the Pyungtaek highbush blueberries, which implies that it is highly correlated with the higher amounts of total polyphenol, anthocyanin, and resveratrol in it. In conclusion, the two varieties of Korean blueberries can be suggested as potential sources of high-value-added functional foods.

• Journal of radiological science and technology
• /
• v.38 no.3
• /
• pp.277-286
• /
• 2015

Diagnostic radiation devices that is used in the country has reached to 78,000 units. When used for human subjects diagnostic purposes, it is subject to Medical Service Act, when used in diagnostic purposes in animal subjects, the subject to Veterinarians Act. When used for other purposes are subject to the Nuclear Safety Act. Even the same radiation devices varies the legislation that is applied depending on the intended use and object. Diversified been p rovisions a re necessary compared to t he analysis o f l egal content in o rder t o prevent confusion of the legislation is a matter to be applied. It is a qualitative study that Nuclear Safety Act, Medical Service Act and Veterinarians Act administrative procedures for the introduction of the applied diagnostic radiation devices, safety inspection, human resources management, area management and the content related to administrative punishment. The Nuclear Safety Act sub-provisions, the introduction of diagnostic radiation generating devices, there are many complex and complete requirements administrative procedures on the concept of a permit. Inspection of safety associated with the use, would be subject to periodic inspection auditing characteristics over the entire field of radiation safety management. It must receive court regular education for the safety administrator and workers. Unlike the reference of the radiation dose rate to specify the radiation controlled area there is a measurement obligation of radiation dose rate. Unlike the reference of the radiation dose rate to specify the radiation controlled area there is a measurement obligation of radiation dose rate. Quantitative difference of administrative punishment that is imposed when legislation violation has reached up to 10 times, over the entire field, the largest burden of radiation safety management at the time of application of the Nuclear Safety Act sub provisions. And it is applied differently depending on the purpose and the imaging target using the same diagnostic radiation devices. Depending on the use mainly under the current legal system, radiation can be lacking in fairness of the contents of the legislation for safety management, there is a risk of confusion. Alternatives such as centralized and standardization of legislation by diagnostic radiation devices use is expected to be necessary.