• Korean Chemical Engineering Research
• /
• v.53 no.6
• /
• pp.723-729
• /
• 2015

The moment analysis of cyclic adenosine monophosphate (cAMP) was performed using chromatograms that were obtained with the pulse input method from an octadecyl silica (ODS) high-performance liquid chromatography (HPLC) column. The general rate (GR) model was employed to calculate the first absolute moment and the second central moment. Three important coefficients for moment analysis, which are molecular diffusivity ($D_m$), external mass transfer coefficient ($k_f$), and intra-particle diffusivity ($D_e$), were estimated by the Wilke-Chang equation, Wilson-Geankoplis equation, and comparing van Deemter equation to theoretical plate number equation, respectively. Experiments were conducted by various conditions of flow rates, methanol volume ratio of the mobile phase, and solute concentration. After the moment analysis, results were organized by van Deemter plots. Also van Deemter coefficients were compared each other to effect $H_{ax}$, $H_f$, and $H_d$ on height equivalent to a theoretical plate (HETP, $H_{total}$). The value of intraparticle diffusion ($H_d$) was the primary factor which makes for HETP whereas external mass transfer ($H_f$) was disregardable factor.

• The Korean Journal of Mycology
• /
• v.38 no.2
• /
• pp.160-166
• /
• 2010

A homothallic filamentous fungus Aspergillus nidulans has been used as the a model organism for studying growth and development for eukaryotic system. Various studies about specific transcription factors have been performed for elucidating the molecular mechanisms of growth, asexual and sexual developmental processes. Among them, the fkhE gene (AN2025.3) is located in chromosome VII and contains an ORF encoding 718 amino acid polypeptide intervening with two short introns. The cDNA sequencing revealed that at least four types of alternative splicing events were occurred when the fkhE gene was transcribed. The putative FkhE polypeptide contains a conserved forkhead domain and a bipartite nuclear localization signal at it's N-terminus and C-terminus, respectively. Deletion of fkhE resulted in impaired conidiophore formation in a solid medium. However, the sexual developmental process or cleistothecia formation was normal. Furthermore, fkhE deletion mutant produced conidiophores and conidia under the submerged culture, indicating that the fkhE gene is involved in asexual developmental process similar to the fkhF gene.

• Wind and Structures
• /
• v.6 no.6
• /
• pp.451-470
• /
• 2003

The classical two-degree-of-freedom (2-d-o-f) "sectional model" is of common use to study the dynamics of suspension bridges. It takes into account the first pair of vertical and torsional modes of the bridge and describes well global oscillations caused by wind actions on the deck, yielding very useful information on the overall behaviour and the aerodynamic and aeroelastic response; however, it does not consider relative oscillations between main cables and deck. On the contrary, the 4-d-o-f model described in the two Parts of this paper includes longitudinal deformability of the hangers (assumed linear elastic in tension and unable to react in compression) and thus allows to take into account not only global oscillations, but also relative oscillations between main cables and deck. In particular, when the hangers go slack, large nonlinear oscillations are possible; if the hangers remain taut, the oscillations remain small and essentially linear: the latter behaviour has been the specific object of Part I (Sepe and Augusti 2001), while the present Part II investigates the nonlinear behaviour (coexisting large and/or small amplitude oscillations) under harmonic actions on the cables and/or on the deck, such as might be generated by vortex shedding. Because of the discontinuities and strong nonlinearity of the governing equations, the response has been investigated numerically. The results obtained for sample values of mechanical and forcing parameters seems to confirm that relative oscillations cannot a priori be excluded for very long span bridges under wind-induced loads, and they can stimulate a discussion on the actual possibility of such phenomena.

• Proceedings of the KSRS Conference
• /
• 2003.11a
• /
• pp.207-209
• /
• 2003

Quantifying crop production is one of the most important applications of remote sensing in which the temporal and up-to-date data can play very important role in avoiding any immediate insufficiency in agricultural production. A combination of climatic data and biophysical parameters derived from Landsat7 ETM+ was used to develop a mathematical model for wheat yield forecast in different geographically wide Wheat growing districts in Egypt. Leaf Area Index (LAI) and fraction of Absorbed Photosynthetically Active Radiation (fAPAR) with temperature were used in the modeling. The model includes three sub-models representing the correlation between the reported yield and each individual variable. Simulation results using district statistics showed high accuracy of the derived correlations to estimate wheat production with a percentage standard error (%S.E.) of 1.5% in El- Qualyobia district and average (%S.E.) of 7% for the whole wheat areas.

• Geomechanics and Engineering
• /
• v.21 no.4
• /
• pp.349-356
• /
• 2020

Rock brittleness, which is closely related to the failure modes, plays a significant role in the design and construction of many rock engineering applications. However, the brittle-ductile failure transition is mostly ignored by the current statistical damage constitutive model, which may misestimate the failure strength and failure behaviours of intact rock. In this study, a new statistical damage model considering rock brittleness is proposed for brittle to ductile behaviour of rocks using brittleness index (BI). Firstly, the statistical constitutive damage model is reviewed and a new statistical damage model considering failure mode transition is developed by introducing rock brittleness parameter-BI. Then the corresponding damage distribution parameters, shape parameter m and scale parameter F₀, are expressed in terms of BI. The shape parameter m has a positive relationship with BI while the scale parameter F₀ depends on both BI and ε_e. Finally, the robustness and correctness of the proposed damage model is validated using a set of experimental data with various confining pressure.

• Journal of Soil and Groundwater Environment
• /
• v.27 no.6
• /
• pp.47-57
• /
• 2022

A number of different methods have been used for modeling the sorption of volatile organic chlorinated compounds such as tetrachloroethylene/perchloroethylene (PCE). In this study, PCE was adsorbed in several natural sorbents, i.e., Pahokee peat, vermicompost, BionSoil^®, and natural soil, in the batch experiments. Several sorption models such as linear, Freundlich, solubility-normalized Freundlich model, and Polanyi-Manes model (PMM) were used to analyze sorption isotherms. The relationship between sorption model parameters, organic carbon content (f_oc), and elemental C/N ratio was studied. The organic carbon normalized partition coefficient values (log K_oc = 1.50-3.13) in four different sorbents were less than the logarithm of the octanol-water partition coefficient (log K_ow = 3.40) of PCE due to high organic carbon contents. The log K_oc decreased linearly with log f_oc and log C/N ratio, but increased linearly with log O/C, log H/C, and log (N+O)/C ratio. Both log K_F,oc or log K_F,oc decreased linearly with log f_oc (R² = 0.88-0.92) and log C/N ratio (R² = 0.57-0.76), but increased linearly with log (N+O)/C (R² = 0.93-0.95). The log q_max,oc decreased linearly as log f_oc and log C/N increased, whereas it increased with log O/C, log H/C and log (N+O)/C ratios. The log q_max,oc increased linearly with (N+O)/C indicating a strong dependence of q_max,oc on the polarity index. The results showed that PCE sorption behaviors were strongly correlated with the physicochemical properties of soil organic matter (SOM).

• Proceedings of the Korean Vacuum Society Conference
• /
• 1999.07a
• /
• pp.183-183
• /
• 1999

The phases and interface formation of MgF2 on Si(111) were studied by using LEED, AES, and TPD. When thick MgF2 film was deposited on the Si(111) surface at RT뭉 annealed at higher temperatures, a sequence of LEED patterns (no LEED pattern $\longrightarrow$1$\times$1$\longrightarrow$3$\times$1$\longrightarrow$7$\times$7) was observed. On the 1$\times$1 model in which Mg adsorbs on T4 site and F on H3 site could explain the simultaneous desorption of SiF2 and Mg. When thin MgF2 film was deposited, and initial $\alpha$-$\times$1 phase transforms to 3$\times$3 and $\beta$-1$\times$1 by thermal annealing with a slow evaporation of F and diffusion of Mg into the surface. the 3$\times$3 surface changes to ${\gamma}$-1$\times$1 by the selective desorptioon of F under e-beam irradiation and subsesquently to a Mg-induced {{{{ SQRT { 3} }}}} structure by annealing at $600^{\circ}C$.

• Asian-Australasian Journal of Animal Sciences
• /
• v.26 no.11
• /
• pp.1536-1544
• /
• 2013

A least squares regression interval mapping model was derived to detect quantitative trait loci (QTL) with a unique mode of genomic imprinting, polar overdominance (POD), under a breed cross design model in outbred mammals. Tests to differentiate POD QTL from Mendelian, paternal or maternal expression QTL were also developed. To evaluate the power of the POD models and to determine the ability to differentiate POD from non-POD QTL, phenotypic data, marker data and a biallelic QTL were simulated on 512 F2 offspring. When tests for Mendelian versus parent-of-origin expression were performed, most POD QTL were classified as partially imprinted QTL. The application of the series of POD tests showed that more than 90% and 80% of medium and small POD QTL were declared as POD type. However, when breed-origin alleles were segregating in the grand parental breeds, the proportion of declared POD QTL decreased, which was more pronounced in a mating design with a small number of parents ($F_0$ and $F_1$). Non-POD QTL, i.e. with Mendelian or parent-of-origin expression (complete imprinting) inheritance, were well classified (>90%) as non-POD QTL, except for QTL with small effects and paternal or maternal expression in the design with a small number of parents, for which spurious POD QTL were declared.

• Korean Chemical Engineering Research
• /
• v.54 no.4
• /
• pp.487-493
• /
• 2016

The moment analysis of lysozyme was implemented using chromatograms that were obtained from weak cation exchange column in high performance liquid chromatography system. Three elution sodium phosphate buffers containing 1.0, 0.75, 0.5M sodium chloride were used. Experiments were conducted by varying flow rate, elution sodium chloride concentration, and lysozyme solute concentration. The general rate (GR) model was employed to calculate the first moment and the second moment. By plotting $L/u_0$ vs. $({\mu}_1-t_0)/(1-{\varepsilon}_e)(1-{\varepsilon}_i)$] equilibrium constants (K) were obtained from first moment analysis. Intra-particle diffusivity was obtained from theoretical plate number data. Based on the results of moment analysis, van Deemter plots were drawn in order to investigate the contributions of $H_{ax}$, $H_f$, and $H_d$ to total Height Equivalent to a Theoretical Plate (HETP, $H_{total}$). The effect of intra-particle diffusion ($H_d$) was the most dominant factor contributing to HETP while external mass transfer ($H_f$) was negligible factor.

• Journal of Appropriate Technology
• /
• v.5 no.2
• /
• pp.82-90
• /
• 2019

The Box-Benhken Design (BBD) model of response surface methodology (RSM) was used to optimize fluoride adsorption conditions in water using a 350℃ thermally treated cow bone. Water temperature, pH, contact time, and initial fluoride concentration were selected as variables to be optimized. A second order reaction equation was obtained from a Box-Behnken Design DoE experimental matrix of 29 runs. R² and p-value of the model were 0.9242 and <0.0001, respectively, indicating that the selected variables had a very substantial effect on the adsorption results. The optimized adsorption capacity of the thermally synthesized bone char was estimated to be 6.46 mgF/g at the water temperature of 39.68℃, pH 6.25, contact time of 88.81 minutes and an initial fluorine concentration of 14.64 mgF/L.