• 한국초전도학회:학술대회논문집
• /
• v.12
• /
• pp.4-4
• /
• 2002

• Proceedings of the Korean Magnestics Society Conference
• /
• 2000.09a
• /
• pp.247-248
• /
• 2000

• Journal of Ocean Engineering and Technology
• /
• v.7 no.2
• /
• pp.131-140
• /
• 1993

To study the corrosion fatigue begavior of T.M.C.P. steel, the rotary bending fatigue test with the change of concentration of NaCl solution was carried out. Fatigue life in the corrosion environment is decreased markedly in comparision with that in the air. Fatigue limit in the air was about 225 MPa. In case of 3.5% NaCl solution fatigue life could be expressed as .sigma./sub f/=10,392 * (N/sub f/)/sup -o.2923 . According to the paris's rule, crack growth rates could be expressed as da/dN=2.62.*10/sup -7/ .DELTA. K/sup 1.09/(3.5% NaCl solution), da/dN=1.95 *10/sup -7 .DELTA. K/sup 1.05/(1% NaCl solution), da/dN=2.62 * 10/sup -7/.DELTA./sup 0.72/(0.01% NaCl solution) with da/dN expressed in mm/cycle and .DELTA.K in MPa.GAMMA.m. The crack growth rate in the corrosion environment was highest under 3.5% NaCl solution.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 2012.10a
• /
• pp.627-628
• /
• 2012

• Korean Journal of Mathematics
• /
• v.17 no.4
• /
• pp.385-397
• /
• 2009

We study codes over the polynomial ring ${\mathbb{F}}_q[D]$ and their projections to the finite rings ${\mathbb{F}}_q[D]/(D^m)$ and the weight enumerators of self-dual codes over these rings. We also give the formula for the number of codewords of minimum weight in the projections.

• Kyungpook Mathematical Journal
• /
• v.18 no.2
• /
• pp.277-283
• /
• 1978

The first part of this paper is devoted to the study of F-structure satisfying: $F^K+(-)^{K+1}F=0$ and $F^W+(-)^{W+1}F{\neq}0$, for 1$${\geq_-}3$$) has been considered. In the later part some structures involving Lie-derivatives. exterior and co-derivatives have been studied.

• Korean Journal of Food Science and Technology
• /
• v.16 no.2
• /
• pp.235-241
• /
• 1984

Two fractions of pectinesterase from Chinese cabbage were isolated by ammonium sulfate fractionation, ion exchange chromatography on DEAE-cellulose and Sephadex G-150 gel filtration. The fraction F-A and F-B were purified approximately 340- and 10-fold. The similar salt effects and pH optima (pH 7.5-8.0) were obtained for the two pectinesterase fractions. The maximum activity of both two. fractions were obtained at 20-50mM of divalent rations and at 250mM of monovalent rations. The apparent Michaelis constant of the F-A was 0.01% for citrus pectin. The temperature optima for F-A and F-B were $48^{\circ}$ and $55^{\circ}C$, respectively and both fractions were stable in the region of pH 5.0-8.0 at room temperature. The thermal inactivation of the two fractions followed the first order reaction kinetics. From D and Z-values obtained the thermal resistance of the two fractions were characterized.

• The Journal of the Petrological Society of Korea
• /
• v.14 no.2 s.40
• /
• pp.108-115
• /
• 2005

Gyeonggi metamorphic complex in the Gwangju area include banded biotite gneiss and quartzofeldspathic gneiss. Detailed structural analysis suggests that structural elements in the study area were formed by at least five phase of deformations. Penetrative compositional foliations(S1) formed in the banded gneiss during the first metamorphism and deformation (D1). After intrusion of plutonic rocks, the second deformation (D2) produced S2 foliations in the banded gneiss and quartzofeldspathic gneiss during the second metamorphism. D3 structures are represented by isoclinal folds (F3) whose axial surfaces are parallel to S3 foliations. The N-S oriented shortening (D4) was accommodated by closed upright F4 fold with about 100m of axial surface separation. F4 fold is refolded by regional F5 folding resulting in different orientation and fold style of F4 fold according to the position of F5 fold. The F4 fold with tight interlimb angle is subparallel to the axial surface (north-south) of F5 fold in the core of the F5 fold. In contrast the F4 fold trends northeast in the western limb and northwest in the eastern limb of F5 fold. The interlimb angle is larger in the limbs than that in the core of F5 fold. The trace of foliations is constrained by mainly F4 and F5 folds. Joint fanning around fold is developed in the limbs of F5 fold and bc joints are dominant in the hinge area of F5 fold. A strike-slip fault had developed in tile central part of the study area after F5 folding. The orientation of joint and foliation is rotated anticlockwise about $15^{\circ}$ by the landslide occurred during the Quaternary.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 1996.10a
• /
• pp.167-172
• /
• 1996

A Dual Mass Flywheel system is a evolution to the reduction of torsional vibration and impact noise occuring in powertrain when a vehicle is eit-her moving or idling. The name already explains what it is : The mass of the conventional single mass flywheel is divided. One section continues to belong to the mass moment of inertia of the engine-side. The ot-her section increass the mass moment of inertia of the transmission-side. The two masses are connected via a spring /damping system. This reduces the speed at which the dreaded resonance occurs to below idle speed. Since 1984 Dual Mass Flywheel has been de-veloped again and again. But the prosidures of de-velopment of D.M.F system didn't have had differe-nce from conventional clutch system's trial and err-or This paper presents the method for systematical design of D.M.F system with demensionless design variables of D.M.F system mass ratio between two flywheels λ. natual frequency rate of two flywheel s, ${\gamma}$and viscosity coefficient ζ. And experimental re-sults are used to prove these theoretical results.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2006.09b
• /
• pp.733-734
• /
• 2006

Granulated powders, prepared from PF-5F($D_{50}=4(\mu}m$), PF-10F($D_{50}=6{\mu}m$) and PF-20F($D_{50}=10{\mu}m$) water atomized powder, were compacted, debound and sintered to evaluate the properties of sintered parts. As a result, the relative sintered density of about 97% at sintering temperature of 1423K was obtained. It can be considered that by using granulated finer particle size powder, mechanical properties of sintered parts were also improved.