• Progress in Superconductivity
• /
• v.11 no.1
• /
• pp.30-35
• /
• 2009

We have investigated the characteristics of a superconductive Pb shield for hemispherical shape and plate to improving signal-to-noise ratio(SNR) of biomagnetism. We measured the shielding factor for the position of helmet shape Pb and for changing the distance from Pb surface. To make a uniform magnetic field, a $1.5m{\times}1.5m$ set of the helmholtz coils activated at several frequencies. The shielding factor of hemispherical shape Pb was from 20 to 57 dB and of Pb plate was about $6{\sim}26dB$ as a function of distance from the lead surface. The shielding factor was rapidly reduced as increasing the distance from Pb surface. The white noise of superconductive quantum interference device(SQUID) with a superconductive shield was about $12fT/Hz^{1/2}$ at 1 Hz, $7fT/Hz^{1/2}$ at 100 Hz. The white noise was more increased about two times than conventional SQUID system without Pb shielding. An auditory signal was measured by first order gradiometer and magnetometer with Pb superconductive shield and compared the SNR. The SQUID system with Pb shield had better performance at low frequency noise level.

• Proceedings of the Korean Powder Metallurgy Institute Conference
• /
• 2002.07a
• /
• pp.133-155
• /
• 2002

1. Quasicrystalline powders shows exotic physical and mechanical p properties 2. Applications: structural application: strengthening particles for composites C Coating application: wear resistance, low friction coefficient 3. For thermal spaying: material loss during process should be c considered to control chemical composition of deposit 4. Friction coefficient is strongly dependent on contact geometry F Friction coefficient from pin on plate: 0.1-0.2 Friction coe야icient from flat on plate: about 0.46. 5. Quasicrystalline materials show lower friction coefficient but higher w wear rate than corresponding values of $Cr_20_3$ coated layer. 6. Amorphous coating seems to be promising

• Journal of Korean Foot and Ankle Society
• /
• v.17 no.2
• /
• pp.143-149
• /
• 2013

Purpose: Open reduction and internal fixation of calcaneal fracture using plate has been used. While numerous plates have been manufactured, most of the conventional plates are designed for westerners, realistically the size is larger for Korean. The domestic products, on the other hand, often have the undesirable screw holes and path. Therefore, we measured the radiologic parameter of Korean calcaneus for providing the plate and screw hole placements. Materials and Methods: We measured the outer lines and angles with over the 20 years old 291 females and 322 males. A: Length of inferior plane of calcaneus, B: Length of anterior plane of calcaneus, C: Length from line A to sinus tarsi, D: Length from line A to posterior point of posterior facet, E: Length from line A to calcaneal tuberosity, F: Length of posterior facet, G: Length from anterior point of line A to C, H: Length from line C to line D, a: Angle between A and B, b: Gissane angle, c: Bohler angle, d: Calcaneal pitch angle using Marosis m-view$^{(R)}$. Results: Mean A, B, C, D, E, F, G, H were 63.6, 26.4, 23.2, 43.7, 40.5, 26.9, 12.8, 18.1 mm. Mean a, b, c, d angle were 105.8, 122.4, 32.4, $20.5^{\circ}$. Male's calcaneus is significantly bigger than female's (p<0.001). Conclusion: AP calcaneus length 63.6 mm, maximal height 43.7 mm is considered to be helpful in making the Korean calcaneal plate.

• Korean Journal of Food Science and Technology
• /
• v.18 no.5
• /
• pp.345-350
• /
• 1986

Crude saponins of soybean and Azuki bean (2.0 mg/plate)were most effective against Trp-p-2, and also all of legume saponins (2.0 mg/plate)were excellent effective against aflatoxin $B_1$. Crude saponins of taro, burdock and ginseng were remarkably effective at ranging from 1.0 mg to 2.0 mg per plate against MeIQ. Especially ginseng saponin was excellent effective and arrow root saponins was remarkably effective against MeIQ, respectively. Plant saponins of taro, lotus burdock, arrow root and ginseng except for dodok were most effective activities against aflatoxin $B_1$.

• Korean journal of applied entomology
• /
• v.18 no.2 s.39
• /
• pp.63-71
• /
• 1979

Tests were made to find new non-mercurious seed disinfectants that were best for rice seeds. For these experiments four seed samples carr)?ing natural infection of Pyricularia oryzae, Helminthosporium oryzae, and Fusarium moniliforme were used and the following fungicides were used; Zinc Omadine, Sodium Omadine, Panoctine, Tecto-F, Benlate-T, Homai, Sisthane, $P_{242}$, Busan 30, Tecto-Wp and Terracoat Zn. Blotter method and water agar plate method used in the laboratory and growing-on test used in greenhouse. Results have shown that Sisthane, $P_{242}$ and Sodium Omadine have equal or superior effect to organic mercury compound against P. oryzae, H. oryzae, and F. moniliforme. Benlate T and Homai are effective against blast and Bakanae disease, but are inferior to organic mercury compound against brown spot disease. Busan 30 and Panoctine are effective against blast and brown spot disease, but have moderately inferior effects against F. monilifome. It is considered that the recommendable testing methods of seed treatment were blotter method for P. oryzae and water agar plate method for H, oryzae and F. moniliforme according to the experimental results obtained. No phytotoxicity against seed germination and seedling growth were observed when treated with disinfectants before germination of seeds.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.29 no.5
• /
• pp.922-934
• /
• 2000

To investigate the composition of carotenoids present in marine organisms and the biological activity of the carotenoids, carotenoids of the muscles and tunic of tunicates and shellfishes were isolated and identified. Anitmutagenic activities of the carotenoids for S. typhimurium TA 98 and cytotoxic activity for cancer cell lines were determined. Total carotenoid contents in the muscle of tunicata ranged from 18.65 mg% to 2.39 mg%. The highest amount of the total carotenoid was found in the muscle of Halocynthia aurantium, followed by Styela clava (HERDMAN), H. roretzi, H. hilgendorfi f. igaboya, H. hilgendorfi f. retteri, S. plicata (LESUEUR) in order. Interestingly, total carotenoid content in the muscle of S. clava (HERDAMAN) was higher than that of H. roretzi. Total carotenoid content of all tunicata, other than H. aurantium and H. roretzi, were higher in muscle than tunic. The major carotenoids in H. roretzi, H. aurantium, S. plicata (LESUEUR), and S. clava (HERDAMAN) were cynthiaxanthin (25.1∼42.2%), halocynthiaxanthin (9.7∼26.3%), diatoxanthin (8.0∼18.7%) and β-carotene (7.7%∼21.7%). Similarly, cantaxanthin (19.6%), cynthiaxanthin (15.4%), halocynthiaxanthin (14.8%), and (3R, 3'R), (3S, 3'S)-astaxanthin (22.6%) in H. hilgendorfi f. retteri and fucoxanthin (26.6%), cynthiaxanthin (21.8%), halocynthiaxanthin (15.2%), and β-carotene (9.3%) in H. hilgendorfi f. igaboya were major carotenoids in both tunicate. However, the composition of carotenoids in muscle and tunic of tunicata was similar each other. Among the shellfishes examined, total carotenoid content of the muscle of Peronidia venulosa (Schrenck) and Corbicula fluminea, and of the gonad of Atrina pinnata and Chlamys farreri, was ranged from 2.51 to 6.83 mg% which were relatively higher than that of other shellfishes. The composition of the carotenoids of shellfishes, which might depend upon their living environments, was varied. But cynthiaxanthin (15.9∼39.0%) and zeaxanthin (9.6∼21.9%) in gonad of C. farreri, and muscles of Buccinum Volutharpa perryi (JAY) and Crassostrea gigas, cynthiaxanthin (21.5∼48.6%) and mytiloxanthin (14.6%) in muscle of C.fluminea and gonad of A. pinnata, and canthaxanthin (60.6%) and isozeaxanthin (20.5%) in muscles of P. venulosa (Schrenck), and β-carotene (23.7%∼37.8%) and zeaxanthin (18.2∼20.4) in muscles of Semisulcospira libertina and Meretrix lusoria were major carotenoids. Interestingly, diester type-carotenoids were present along with free type-carotenoids in muscles of C. gigas. antimutagenic effect of the carotenoids isolated from tunicata and shellfishes against 2-amino-3-methylimidazol [4,5-f]quinoline (IQ) for S. typhimurium TA 98 was proportional to the amount (20, 50 and 100㎍/plate) treated. Mutagenicity of IQ was significantly reduced by astaxanthin, isozeaxanthin, mytiloxanthin and halocynthiaxanthin, whereas the mutagenicity of aflatoxin B₁(AFB₁) was significantly reduced by β-carotene, isozeaxanthin, and mytiloxnthin. Growth inhibition effect of carotenoids isolated from tunicata and shellfishes for cancer cell was proportional to the amount (5, 10, and 20㎍/plate) treated. The growth of HeLa cell by β-carotene, cynthiaxanthin, astaxanthin and halocynthiaxanthin, NCI-H87 cell by β-carotene, astaxanthin, cynthiaxanthin, and halocynthiaxanthin, HT-29 cell by β-carotene, cynthiaxanthin, mytiloxanthin and halocynthiaxanthin, and MG-63 cells by β-carotene, cynthiaxanthin, astaxanthin, canthaxanthin and halocynthiaxanthin were statistically reduced.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07b
• /
• pp.710-713
• /
• 2003

The PZT(KP12) powder was synthesized by sintering at $1250^{\circ}C$ for 2hrs and wet milling for 24 hrs. The PZT composite mixed with PVdF was fabricated into bulk, sheet, and plate type and the characteristics of three types were estimated. The bulk type which has PZT volume percent of 70 showed the best piezoelectric constant. Dielectric constant increased exponentially as an increase of PZT volume percent. The figure of merit of bulk and plate type was better than pure PZT over PZT volume percent of 50.

• Transactions of the Korean Society of Mechanical Engineers B
• /
• v.25 no.12
• /
• pp.1869-1878
• /
• 2001

Experiments are carried out to investigate the effect of pulsations on the flow and heat transfer characteristics of an axisymmetric impinging jet on a flat plate heated by using a gold coated aim. Vertex motion in the impinging jet is visualized using a fog generator, and a thermochromatic liquid crystal (TLC) technique is used to measure the time averaged local temperature distributions on the impingement plate. In addition, the quantitative data for mean velocity and turbulence intensity are obtained employing hot-wire anemometer. Parameters such as pulsating frequency (f = 0, 10 and 20 Hz) and the nozzle-to-palate spacing (H/D = 2, 10) are considered at the jet Reynolds number of 20,000. Consequently, the significant changes of flow structure and local Nusselt number distribution due to pulsations are observed. In the case of H/D = 2, the enhanced heat transfer coefficient exceeding 30 % is observed at the stagnation point. At the high H/D, heat transfer rate increases with pulsation frequency.

• International Journal of Automotive Technology
• /
• v.3 no.4
• /
• pp.171-176
• /
• 2002

A bench test set-up is employed to simulate the friction characteristics of a paper-based friction material operating against a steel plate. Dry friction tests are run as well as tests with transmission fluids. Glazed friction material produces a negative coefficient of friction versus sliding velocity (f-v) curve for both dry friction and lubrication with transmission fluids. At low sliding speeds, the coefficient of friction when operating in transmission fluids for glazed friction materials is greater than that under dry friction. An appreciable negative f-v slope occurs at low sliding speeds for glazed friction materials when running with the transmission fluid. The friction material after running in produces a constant f-v curve under dry friction and a negative slope when lubricated with transmission fluid. At low sliding speeds, the coefficient of friction of the run-in friction material is lower than that of the glazed wet material. On the other hand, the run-in friction material has a larger friction coefficient than does the glazed friction material at higher sliding speeds.

• Electrical & Electronic Materials
• /
• v.9 no.9
• /
• pp.906-910
• /
• 1996

Ferroxplana N $i_{2}$Y(B $a_{2}$N $i_{2}$F $e_{12}$ $O_{22}$ ) magnetic particles, which is one of the hexagonal ferrite were synthesized by a coprecipitation method. The coprecipitates were prepared by adding aqueous solution of BaC $I_{2}$ - 2 $H_{2}$O, NiC $I_{2}$ - 6 $H_{2}$O and FeC $I_{3}$ - 6 $H_{2}$O(of which the mole ratio is $Ba^{+2}$ : N $i^{+2}$ : F $e^{3+}$= 1 : 1 : 6) to a mixture of NaOH and N $a_{2}$C $O_{3}$. The shape of Ferroxplana N $i_{2}$Y magnetic particles obtained at 1, 100(.deg. C) was hexagonal plate-like, average particle size and aspect ratio were 2(.mu.m) and 7, respectively.y.