• The Korean Journal of Mycology
• /
• v.18 no.3
• /
• pp.164-177
• /
• 1990

This study was carried out to obtain some useful data for increasing an effective ginseng production. There was a direct relationship (r=0.2645) between spore germination of Fusarium solani and soil pH, and (r=0.315) between Cylindrocarpon destructans and soil pH. On the other hand, there was a direct relationship (r=0.19) between relative hyphal growth of Rhizoctonia solani and soil pH. There was a direct relationship (r=0.21) between number of total bacteria and F. solani, (r=0.37) between actinomycetes and F. solani and (r=0.20) between celluloytic bacteria and F. solani. However, there was an inverse relationship (r=-0.20) between number of total fungi and F. solani. There was a direct relationship (r=0.24) between number of actinomycetes and R. solani. Each ginseng pathogen-suppressive soil screened was 40 in F. solani, 20 in C. destructans and 9 soil samples in R. solani among 146 soil samples, respectively. The mean contents of K, Ca and Mg were fairly lower in each ginseng pathogen-suppressive soil than conducive soil, whereas Na were somewhat lower. The mean contents of organic matter were over 2 times higher in each ginseng pathogen-suppressive soil than conducive soil. The mean contents of phosphate were fairly lower in F. solani and R. solani-suppressive soil than conducive soil and, on the other hand, were somewhat higher in C. destructans-suppressive soil than conducive soil. The mean soil pH was somewhat lower in each ginseng pathogen-suppressive soil than conducive soil. The mean contents of sand were about 2 times higher in each ginseng pathogen­suppressive soil than conducive soil, whereas silt and clay were somewhat lower. The microbial numbers of total bacteria, total fungi and celluloytic fungi were higher in F. solani-suppressive soil than conducive soil, whereas actinomycetes and celluloytic bacteria were lower. Each microbial number of total bacteria or total fungi indicated a significant difference (p=0.05) between F. solani­suppressive and conducive soil, and the microbial number of actinomycetes was a highly significant difference (p=0.01) between F. solani-suppressive and conducive soil. The microbial numbers of total bacteria, total fungi, actinomycetes and celluloytic fungi were higher in C. destructans-suppressive soil than conducive soil, whereas celluloytic bacteria were about 2 times lower. On the other hand, the microbial numbers of total fungi were higher in R. solani-suppressive soil than conducive soil, whereas total bacteria, actinomycetes, celluloytic bacteria and celluloytic fungi were lower. Fourteen of 16 F. solani-suppressive soils tested were suppressive to ginseng root rot, whereas fifteen of 16 C. destructans-suppressive soils were suppressive. Ginseng root rots of ginseng disease-suppressive soils were in the range of 1.0-17.4% in F. solani-suppressive soil and 0.2-20.4% in C. destructans-suppressive soil, respectively.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2011.02a
• /
• pp.217-217
• /
• 2011

플라즈마를 이용하는 식각 및 증착등의 반도체공정에 있어서 최근에는 기판의 크기가 점차 증가하는 추세에 있다. 이러한 대면적 플라즈마 발생장치 내에서 플라즈마 밀도와 라디칼 농도의 공간적인 특성을 이해하는 것에 대한 중요성이 더해지고 있다. 이를 위해 Langmuir probe와 같은 전기적 접근법에 의한 진단방법이나 광학적 접근법에 의한 진단방법에 대한 연구가 이루어 졌다. 전기적 접근법에 의한 플라즈마의 진단방법은 원리가 간단하고 정확도가 높다는 장점이 있지만 진단 장치에 의한 플라즈마의 간섭이 크고 식각가스의 경우 진단이 어렵다는 단점이 있다. 그에 비해 광학적 진단방법은 플라즈마에 간섭이 많지 않은 방법으로 알려져 있고 레이저 형광법(LIF), 원적외선 레이저 흡수 분광법(IR laser Absorption Spectroscopy), 광량측정법(Actinometry)등이 있다. 이 중 레이저 형광법, 원적외선 레이저 흡수 분광법의 경우, 진단장치가 매우 복잡하고 가격이 비싸다는 단점을 가지고 있다. 반면 광량측정법의 경우 다른 광학적 접근법에 의한 진단방법에 비해 원리와 실험장치가 간단하고 공간적인 라디칼 분포의 진단이 쉽다는 점에서 장점을 가지고 있다. Actinometry는 Ar과 같은 불활성 기체를 작은 비율을 넣어서 여기 된 불활성 기체의 파장세기와 여기 된 측정 라디칼의 파장세기의 비교를 통해 상대밀도를 측정하는 방법이다. 이 측정 방법에 Abel's inversion equation을 적용함으로 해서 대면적 M-ICP(Magnetized - Induced Coupled Plasma)에서 식각가스인 $CF_4$플라즈마에서 F 라디칼 농도의 공간적인 분포를 측정하고 분석하였다. 또한 플라즈마의 압력, 소스 전력 값과 기판 전력 값등의 조건의 변화에 따라 F 라디칼 농도의 분포가 어떻게 달라지는지에 대해 측정 분석하여 다루었다.

• KOREAN JOURNAL OF CROP SCIENCE
• /
• v.23 no.2
• /
• pp.34-39
• /
• 1978

Partial dominance was exhibited by flowering(heading), panicle length, panicle numbers, $F_1$ag leaf length, 1000 kernel weight in $F_1$ and $F_2$ hybrids by 7 \times 7 and 5 \times 5 diallel crosses. Over dominance was exhibited by culm length, flag leaf width, appearance degree of panicle in $F_1$ generation of the crosses, and also over dominance was exhibited by kernel weight in $F_2$ generation of the crosses.

• Journal of Life Science
• /
• v.7 no.4
• /
• pp.355-357
• /
• 1997

Seed size is a important yield components in soybean (Glycine max L.). The seed size frequency distributions in the mating between two G. max parents possessing quite different seed size exhibited a continuous distribution in the F$_{2}$ and F$_{3}$ generations. A progeny seed size equal to that of either parent was not observed in either generation. The population mean seed size in each generation was less than the mid-parent, with the distribution of lines skewed toward the small seeded parent.

• Korean Journal of Plant Taxonomy
• /
• v.40 no.3
• /
• pp.157-162
• /
• 2010

Sequences of the trnL/F intergenic spacer of chloroplast DNA were used to investigate the intraspecific evoution and phylogeography of Sedum takesimense (Crassulaceae). The trnL/F intergeneric spacer sequences from 32 individuals of S. takesimense were either 291 bp (17 samples "without indel" in the following) or 297 bp (15samples "with indel 1") in length due to an indel of 6 bp. Two main cpDNA haplotypes were detected within S. takesimense. The haplotype with indel was found on Ulleung Island and without indel on Ulleung Island and Dok Island. This confirmed the existence of two cpDNA lineages with different geographical distributions. The cpDNA sequence analysis also suggested a putative long-distance dispersal event between Ulleung Island and Dok Island.

• Proceedings of the Computational Structural Engineering Institute Conference
• /
• 2002.10a
• /
• pp.549-556
• /
• 2002

주변이 Kinney의 정의에 따른 부분 고정도를 가지고 지지된 직4각형 평판이 부분 분포하중을 받고 있을 때의 안정해석을 유한 요소법으로 수행하였다. 수치해석에서 고려한 변수는 평판의 변장비 (=λ)와 부분 분포하중 작용폭 (=γ) 및 부분 고정도 (=f) 값이다. 여기서 특히 f=0.0 은 주변이 단순지지를 표시하고 f=1.0은 고정지지를 뜻하는데 수치해석에서는 f=0.0, 0.2, …, 1.0으로 변화시켰다. 유한 요소법으로 산정한 판의 좌굴계수 변화는 각각의 변장비에 대하여 나머지 두 개의 매개변수를 변랑으로 하는 대수 함수식으로 표시하였다. 제안한 대수식으로 추정한 임계하중치와 유한 요소법으로 산정한 임계하중치 간의 상관계수는 모든 변장비에 대하여 거의 단위치 (ρ=1.0)에 가까웁다. 따라서 제안한 대수 함수식은 구조 설계자들의 판 설계 및 안정 검토시에 유익한 자료로 이용될 수 있다.

• The Korean Journal of Applied Statistics
• /
• v.8 no.2
• /
• pp.87-97
• /
• 1995

When there is no main effcts or only one main effect in a $2 \times 2$ factorial design, Type I error rates and power for the rank transformed F test (FR test) for interaction are nearly equal to those of the classical F test. However the power of FR test is quite superior under the exponential distribution rather than the of FR test is quite superior under the exponential distribution rather than the normal distribution. Meanwhile when both main effects are in the model, Type I error rates of FR test, compared with those of F test, decrease as the effect size increases and are dependent on the fashion in which main effects are constructed. In addition, the power of FR test increases as the effect size and the sample size increase and is highly dependent on the manner in which main effects are constructed and the type of population distribution.

• Journal of the Korean Ceramic Society
• /
• v.40 no.7
• /
• pp.677-682
• /
• 2003

The physical properties of sintered body made from 3 kinds of slip, F (Flocculated), M (Moderate), and D (Dispersed) for coal fly ash 70-clay 30 (wt%) were studied in terms of slip states and pore size distribution of sintered bodies. The floc particle size distribution for slip F was wider than slip D and the slip F contained flocs larger than 11 $\mu\textrm{m}$. The pore size distribution of the green body of all slips ranged over 1∼4 $\mu\textrm{m}$. The pores smaller than 1 $\mu\textrm{m}$ almost disappeared during the sintering process, while the larger pore of 2.5∼3 $\mu\textrm{m}$ growed by 1 $\mu\textrm{m}$. The pore distribution for the green body of slip F became a narrow in width and high in height after sintering and the large pore limit in a slip F sintered body was 5.1 $\mu\textrm{m}$ which is smaller than that of other slip. The slip F rather flocculated was favorable over slip D well dispersed, in offering a higher compressive strength. From these results, the mechanical strength of sintered body is dependent on the pore distribution which could be controlled by dispersion state of the slips.

• Journal of Korea Water Resources Association
• /
• v.34 no.1
• /
• pp.67-80
• /
• 2001

This study is to propose temporal pattern of design rainfall which causes maximum peak discharge and to analyze the variation in peak discharge according to design rainfall durations. In this study, the Mononobe, the Yen and Chow triangular, the Huff's 4th quartiles and the Keifer and Chu methods are applied to estimate the proper temporal pattern of design rainfall and three rainfall-runoff models such as SCS, Nakayasu, and Clark methods are used to estimate the runoff hydrograph. And to examine the variability of peak discharge, the hydrologic characteristics from the rainfall-runoff models to which uniform rainfall intensity is applied are used as the standard values. The type of temporal pattern of design rainfall which causes maximum peak discharge in both of the watersheds and the rainfall-runoff models has resulted in Yen and Chow distribution method with the dimensionless vague of 0.75. On the basis of determined temporal pattern, the examination of the variability of peak discharge according to design rainfall durations shows that design rainfall duration varies greatly with the types of probable intensity formula, and the variation of peak discharge is more affected by the types of probable intensity formula and I-D-F currie than rainfall-runoff models.

• KSCE Journal of Civil and Environmental Engineering Research
• /
• v.3 no.3
• /
• pp.95-106
• /
• 1983

The probability of failure is used to analyze the reliability of three dimensional slope failure, instead of conventional factor of safety. The strength parameters are assumed to be normal variated and beta variated. These are interval estimated under the specified confidence level and maximum likelihood estimation. The pseudonormal and beta random variables are generated using the uniform probability transformation method according to central limit theorem and rejection method. By means of a Monte-Carlo Simulation, the probability of failure is defined as; $$P_f$$=M/N N: Total number of trials M: Total number of failures some of the conclusions derived from the case study include; 1. If the strength parameters are assumed to be normal variated, the relationship between safety factor and the probability of failure is fairly consistent, regardless of the procedures of analysis and dimensions of assumed rupture surfaces. 2. However if the strength parameters are beta variated, general relationship between $F_s$ and $P_f$ is hardly found.