• 제목/요약/키워드: Extruder

검색결과 368건 처리시간 0.022초

연구용 압출기를 활용한 PLA와 텅스텐 혼합물의 차폐 성능 (Shielding Performance of PLA and Tungsten Mixture using Research Extruder)

  • 김도성;김태형;윤명성;김상현
    • 한국방사선학회논문지
    • /
    • 제17권4호
    • /
    • pp.557-564
    • /
    • 2023
  • 본 연구에서는 차폐성능의 우수함이 증명된 납 사용에 있어 나타나는 단점을 보완하고 불필요한 인체 피폭을 제어하기 위하여 3D 프린팅 기술을 이용하였다. 3D 프린터는 3차원 형상 구현이 가능하며, 개인의 아이디어를 즉각적으로 적용할 수 있어 시제품 제작 비용 및 기간을 줄여주면서 기술 보완 유지에 큰 장점이 있다. 다양한 특증의 3D 프린터 중 FDM 방식을 채택하였으며, 출력에 사용되는 필라멘트를 폴리락트산 (Polylactic acid, PLA)와 텅스텐 두 가지 소재를 혼합하여 연구용 압출기를 활용해 제작하였다. 출련된 혼합 필라멘트를 형태학적 차폐체로 구현하였으며, 선량평가를 통해 유효성 검증과 동시에 다양한 물질의 차페체 제작에 기초 정보 제공에 목적을 두었다. PLA와 텅스텐을 혼합하여 연구용 압출기로 제작된 필라멘트는 텅스텐 함유 비율에 따라서 10 %, 20 %, 30 %, 40 %, 50 %로 구분하여 제작하였다. 3D Modeling, STL File 저장, G-code생성, 출력등의 처리과정으로 10 cm × 10 cm × 0.5cm의 크기로 각각 제작하였고, 관전압 60 kVp, 80 kVp, 100 kVp, 120 kVp와 관전류 20 mAs, 40 mAs의 조건으로 선량 및 차폐성능 평가 실험하였다.

Gas Barrier성 Ionomer-Clay 하이브리드 막의 제조 및 물성 (Preparation and Properties of Ionomer-Clay Hybrid Gas Barrier Membranes)

  • 남상용;구형서;김인호;김영진;주대성;박지순;김진학
    • 멤브레인
    • /
    • 제14권4호
    • /
    • pp.320-328
    • /
    • 2004
  • 본 연구에서는 ionomer와 여러 가지의 유기화물로 처리된 MMT type의 clay를 이용하여 ionomer-clay 하이브리드 막을 용융삽입법으로 제조하였다. Twin extruder를 사용하여 clay를 ionomer에 분산시켰으며, 제조된 ionomer-clay 하이브리드에서 clay의 특성피크가 완전히 박리되거나 이동하는 XRD 결과로부터 clay의 층간거리가 넓어지는 고분자의 clay 층간삽입을 확인하였다. Clay의 종류에 따라서 제조된 ionomer-clay 하이브리드 막의 가스투과도, 기계적 물성 및 열적 성질을 측정하였다. ionomer-clay 하이브리드 막은 clay 자체의 도입과 층간거리의 확대로 기체분자의 tortuosity를 증가시켜서 가스투과도를 저하시키는 것을 확인하였다.

다른 수분함량으로 압출성형한 다수확 멥쌀가루의 이화학적 특성 (Physicochemical Properties of High Yielding Non-waxy Rice Flours Extruded with Different Moisture Contents)

  • 정소희;강위수;신말식
    • 한국식품조리과학회지
    • /
    • 제27권6호
    • /
    • pp.745-754
    • /
    • 2011
  • To improve the textural properties of gluten free rice flour based products, the physicochemical and pasting properties of extruded non-waxy rice flours using extruder were investigated. The high yielding Tongil type rice variety, Hanarum was used. Hanarum rice flour was prepared by dry milling from soaked and dried rice grain. The operation conditions of twin screw extruder were 250 rpm of screw speed, $160^{\circ}C$ of barrel temperature, and 24, 27, and 30% of moisture content. Hanarum extruded rice flour (HERF) were lower in crude lipid and ash contents, but higher in crude protein than Hanarum rice flour (HRF). The color values of HERF showed significantly different (p<0.05) with different moisture contents. Water binding capacities, apparent amylose contents, and damaged starch of HERF were higher than those of HRF. Moisture contents affected water binding capacities of HERF. Solubility increased with increasing heating temperature and solubilities of HERF differed significantly (p<0.05). X-ray crystallinity was changed after extrusion cooking and that of HERF showed sharp peaks at $2{\theta}=18-20^{\circ}$. The pasting viscosities of HERF kept lower values (~ 10 RVU) constantly.

펙틴/전분 블렌드 필름의 기계적 물성 및 형태학 (Mechanical Properties and Morphology of Pectin/Starch Blend Films)

  • 신부영
    • 공업화학
    • /
    • 제10권7호
    • /
    • pp.1008-1013
    • /
    • 1999
  • 펙틴/전분 블렌드의 열가소성과 펙틴/전분 비와 가소제 함량이 블렌드의 기계적 물성과 형태에 미치는 영향을 조사하였다. 블렌드는 이축 압출기로 제조하였으며 시험용 필름은 슬릿 다이가 부착된 일축 압출기로 제조하였다. 대부분의 블렌드는 열가소성 성질을 가지고 있었으나, 펙틴/전분비가 아주 높은 블렌드는 열가소성 성질이 매우 약하였다. 필름의 인장 물성은 가소제인 글리세롤의 함량에는 크게 변화였으나 펙틴/전분 비의 변화에 대하여는 상대적으로 적게 변화하였다. 습조성 블렌드의 DSC 곡선은 $125^{\circ}C$에서 유리전이온도와 유사한 전이온도를 포함하고 있었다. 파단면의 전자현미경사진은 펙틴과 전분의 계면에서는 접착 현상이 좋다는 것을 보여주었다.

  • PDF

Polymerization of Sugar by Extrusion

  • Hwang, Jae-Kwan;Kim, Chul-Jin;Chong-Tai, Kim
    • Preventive Nutrition and Food Science
    • /
    • 제2권4호
    • /
    • pp.296-300
    • /
    • 1997
  • Glucose syrup and lactose, mixed with citric acid as a polymerizing catalyst, was processed using twin screw extruder, in which 40 of L/D(length/diameter) ratio was designed to provide sufficient retention in extruder for polymerization of sugars. The polymerization yields of glucose syrup were 36.90%, 55.44% and 77.10% at 160, 180 and 20$0^{\circ}C$, respectively, while those of lactose were 26.45%, 38.16% and 45.86% at the same temperatures. Gel permeation chromatography exhibited that the higher molecular weight fractions were increased with extrusion temperature, which also led to increasing hydrodynamic intrinsic viscosity. Both uco-oligosaccharides and lacto-oligosaccharides produced by extrusion of glucose syrup and lactose were stable for thermal treatments over a wide range of pH3.0~11.0. In addition, $\alpha$-amylase and amyloglucosidase treatment of gluco-oligosaccharides did not affect the solution viscosity, indicating the random linkage rather than $\alpha$-1, 4 linkages of glucose and thus the potential applications as a dietary fiber. In this research it was clearly observed that twin screw extrusion can be successfully utilized to produce gluco-oligosaccharides and lacto-oligosaccharides rapidly and continuously in conjunction with selective control of polymerized composition.

  • PDF

고분자 나노복합재료의 가공조건 및 물성 최적화 (Optimization of Processing Conditions and Mechanical Properties in Polymer Nanocomposite)

  • 남병욱;홍채환;황태원
    • 한국자동차공학회논문집
    • /
    • 제15권6호
    • /
    • pp.73-80
    • /
    • 2007
  • Nanocomposites are used as a new class of polymer system and many researchers have been interested in the clay nanocomposite because of its good mechanical properties, heat resistance, flame retardancy, and barrier property. Modified layered silicates as fillers are dispersed at a nanometer-level within a polymer matrix and then new extraordinary properties are observed. In this study, polypropylene/clay nanocomposites were prepared in a twin screw extruder by the melt compounding method. In order to increase the compatibility of PP with the clay, the MAPP was used as a compatibilizer. And organic modified clays were used as a nanometric filler during the melt extrusion. Through the analysis of SAXS, WAXS, the dispersion of clay was investigated. These nanocomposites compared with a neat polypropylene/talc composite have high modulus, low toughness, and reduced shrinkage at the stable dispersion.