• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2006년도 춘계학술대회논문집
• /
• pp.157-163
• /
• 2006

Vibration and deformation sensing control of lightweight structures using optical fiber sensor technology is introduced in this presentation. This paper shows several examples of vibration control and deformation estimation for structures using these optical fiber sensor systems. Among various optical fiber sensors, in this paper, two types of optical fiber sensors, Fabry-Perot Interferometer(EFPI) and Fiber Bragg Grating(FBG) sensors, are mainly dealt with. Fiber optic sensors show many advantages over conventional strain gages for the measurement of vibration and deformation of lightweight structures.

• 한국소음진동공학회논문집
• /
• 제12권4호
• /
• pp.294-301
• /
• 2002

Vibration control of a plate using an optical fiber sensor and a piezoelectric actuator is considered in the present study, An aluminum plate with attached Extrinsic Fabry-Perot Interferometer (EFPI) and piezoelectric actuator is prepared for experimental investigation. Vibration level of EFPI that can represent the mechanical strain without severe distortion Is validated by forced nitration experiment. A linear time invariant system model is constructed based on the experimentally obtained frequency responses, and an optimal controller is designed for the multi-modal vibration suppression. Control performance is presented in frequency and time domains. It is found that the nitration level of the first three modes can be greatly reduced. The effect of low-pass filtering used to eliminate high frequency noise on the stability and control performance is also considered.

• Molecules and Cells
• /
• 제20권2호
• /
• pp.157-166
• /
• 2005

The c-myc proto-oncogene encodes a nuclear protein that is deregulated and/or mutated in most human cancers. Acting primarily as an activator and sometimes as a repressor, MYC protein controls the synthesis of up to 10-15% of genes. The key MYC targets contributing to oncogenesis are incompletely enumerated and it is not known whether pathology arises from the expression of physiologic targets at abnormal levels or from the pathologic response of new target genes that are not normally regulated by MYC. Regardless of which, available evidence indicates that the level of MYC expression is an important determinant of MYC biology. The c-myc promoter has architectural and functional features that contribute to uniform expression and help to prevent or mitigate conditions that might otherwise create noisy expression. Those features include the use of an expanded proximal promoter, the averaging of input from dozens of transcription factors, and real-time feedback using the supercoil-deformable Far UpStream Element (FUSE) as physical sensor of ongoing transcriptional activity, and the FUSE binding protein (FBP) as well as the FBP interacting repressor (FIR) as effectors to enforce normal transcription from the c-myc promoter.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2000년도 하계종합학술대회 논문집(2)
• /
• pp.16-19
• /
• 2000

DC and low frequency noise characteristics of InGaP/InGaAs pseudomorphic HEMTs (p-HEMTs) grown by compound source MBE are investigated for temperature range of 150K to 370K. Equivalent input noise spectra( $S_{iv}$ ) were measured as a function of frequency and temperature. $S_{iv}$ was measured to be 3.4 $\times$ 10$^{-12}$ $V^2$/ Hz at 1kHz for 1.3 X 50${\mu}{\textrm}{m}$$^2$InGaP/InGaAs p-HEMT at room temperature. Measurements of the low-frequency noise spectra of the p-HEMT as a function of temperature show that the trap with an activation energy level around 0.589 eV is a dominant trap that accounts for the low-frequency noise behavior of the device. The normalized extrinsic gm frequency dispersion of the p-HEMT. was as low as 2.5％ at room temperature, indicating that the device has well-behaved low-frequency noise characteristics. Sub-micron (0.25 $\times$ 50${\mu}{\textrm}{m}$$^2$) gate p-HEMT showed $f_{T}$ and $f_{max}$ of 40GHz and 108GHz, respectively.y.y.

• 한국소음진동공학회논문집
• /
• 제14권8호
• /
• pp.726-733
• /
• 2004

On-line phase tracking of an extrinsic Fabry-Perot interferometer (EFPI) and experimental vibration control of a composite beam with a sensing-patch are investigated. We propose a sensing-patch for the compensation of the interferometric non-linearity. In this paper. a sensing-patch that comprises an EFPI and a piezo ceramic(PZT) is fabricated and the characteristics of the sensing-patch are experimentally investigated. A simple and practical logic is applied for the real-time tracking of optical phase of an interferometer Experimental results show that the proposed sensing-patch does not have the non-linear behavior of conventional EFPI and hysteresis of piezoelectric material. Moreover, it has good strain resolution and wide dynamic sensing range. Finally, the vibration control with the developed sensing-patch has been performed using Fuzzy logic controller, and the possibility of sensing-patch as a sensoriactuator is considered.

• 대한전자공학회논문지SD
• /
• 제45권8호
• /
• pp.48-53
• /
• 2008

본 논문에서는 100 nm InGaAs/InAlAs/GaAs metamorphic HEMT (high electron mobility transistor)를 이용하여 94 GHz 대역 응용에 적용 가능한 MMIC (millimeter-wave monolithic integrated circuit) 저잡음 증폭기를 구현하였다. 94 GHz MMIC 저잡음 증폭기 구현을 위하여 제작된 $100nm\times60{\mu}m$ MHEMT의 측정결과, 655 mA/mm의 드레인 전류 밀도, 720 mS/mm의 최대전달컨덕턴스를 얻었으며, RF 특성으로 전류이득차단주파수는 195 GHz, 최대공진주파수는 305 GHz의 양호한 성능을 나타내었다. 구축된 MHEMT와 CPW 라이브러리를 이용하여 구현된 MMIC 저잡음 증폭기의 측정결과, 94 GHz에서 $S_{21}$ 이득은 14.8 dB, 잡음지수는 4.6 dB의 우수한 특성을 얻었다. 전체 칩의 크기는 $1.8mm\times1.48mm$이다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 2000년도 제15차 학술회의논문집
• /
• pp.440-440
• /
• 2000

In general, camera calibration is consisted of Indoor and Outdoor system. In case of Indoor system, it was optimized experimental condition. However, Outdoor system is different camera parameters for each image that is compared to equaled position. That is, it imply that camera parameters are varied by an environment with light or impulse noise, etc. So we make use of Image sequence because that they provide the more information for each image. In addition to, we use Corresponding line because it has less error than Corresponding point. Corresponding line has also the more information. In this paper, we suggest on-line camera calibration method using the time-varying Image sequence and Corresponding line. So we calculate camera parameters with intrinsic and extrinsic parameters in On-line system.

• ETRI Journal
• /
• 제36권4호
• /
• pp.591-598
• /
• 2014

This paper proposes a new min-sum algorithm for low-density parity-check decoding. In this paper, we first define the negative and positive effects of the received signal-to-noise ratio (SNR) in the min-sum decoding algorithm. To improve the performance of error correction by considering the negative and positive effects of the received SNR, the proposed algorithm applies adaptive scaling factors not only to extrinsic information but also to a received log-likelihood ratio. We also propose a combined variable and check node architecture to realize the proposed algorithm with low complexity. The simulation results show that the proposed algorithm achieves up to 0.4 dB coding gain with low complexity compared to existing min-sum-based algorithms.

• 대한전자공학회논문지TC
• /
• 제44권2호
• /
• pp.6-14
• /
• 2007

본 논문에서는 V-BLAST (Vertical-Bell-lab Layered Space Time) 복호 알고리즘의 ordering과 slicing 과정에 MAP(Maximum A Posteriori) 디코더의 외부 정보 (extrinsic information)를 이용한 최적의 터보 부호화된 (Optimal Turbo Coded) V-BLAST 적응 변조 시스템을 제안 후 성능을 관찰한다. 외부정보는 ordering과 slicing에 사전 확률 (a priori probability) 로서 사용되며 시스템 복호 과정은 주 반복 (Main Iteration) 및 부 반복 (Sub Iteration) 과정으로 이루어진다. 채널 상태에 따라 변조 방식을 달리하는 적응 변조 시스템을 기존의 터보 부호화 (Turbo Coding) 된 V-BLAST 시스템과 최적의 터보 부호화된 V-BLAST 시스템에 각각 적용하고 전송률 (throughput) 을 비교하여 제안된 시스템을 적용할 경우 어느 정도의 성능 개선이 있는가를 살펴본다. 또한, 제안된 시스템에 선택적 전송 다이버시티 (STD : Selection Transmit Diversity) 기법을 적용한 후 성능의 향상을 관찰한다. 모의 실험결과, 적응 변조 시스템에서 최적의 터보 부호화된 V-BLAST 기법을 적용한 경우가 기존의 터보 부호화된 V-BLAST 기법을 적용한 경우에 비하여 11 dB의 SNR (Signal to Noise Ratio) 영역에서 최대 약 350 kbps의 전송률 향상이 나타났다. 특히, 제안된 시스템에 선택적 전송 다이버시티가 적용된 경우에는 송수신 안테나가 각각 2개인 기존의 터보 부호화된 V-BLAST 기법을 적용한 시스템의 경우에 비하여 같은 SNR 영역에서 최대 약 1.77 Mbps의 전송률이 개선됨을 보였다.

• 대한전기학회논문지:시스템및제어부문D
• /
• 제51권5호
• /
• pp.212-219
• /
• 2002

In this paper, the epipolar geometry, genera17y used as a pin-hole camera model, is newly adapted to our proposed method that enables the affine reconstruction of the 3D object from two projected views. The proposed method models the projective projection of inherent X-ray imaging system, obviates the need to attach artifirially constructed material on the body, and requires none of the prior-knowledge regarding to intrinsic and extrinsic parameters of two X-ray imaging systems. The optimum numerical solution is obtained by applying the least mean square estimator to corresponding points on two projected X-ray planes. The performance of this proposed method is Quantitatively analyzed using computer synthesized model of Cochlear implantation electrodes. In simulated experiments, the propnsed method is insensitive to the added random noise, the scaling factor change, the center point change, and rotational angular change between two projection planes, as well as enables the stable 3D reconstruction in least square sense even in worst testing cases.