• Journal of the Korea Concrete Institute
• /
• v.26 no.2
• /
• pp.159-169
• /
• 2014

This study generalizes the lateral load-displacement relationship of reinforced concrete shear walls from the section analysis for moment-curvature response to straightforwardly evaluate the flexural capacity and ductility of such members. Moment and curvature at different selected points including the first flexural crack, yielding of tensile reinforcing bar, maximum strength, 80% of the maximum strength at descending branch, and fracture of tensile reinforcing bar are calculated based on the strain compatibility and equilibrium of internal forces. The strain at extreme compressive fiber to determine the curvature at the descending branch is formulated as a function of reduction factor of maximum stress of concrete and volumetric index of lateral reinforcement using the stress-strain model of confined concrete proposed by Razvi and Saatcioglu. The moment prediction models are simply formulated as a function of tensile reinforcement index, vertical reinforcement index, and axial load index from an extensive parametric study. Lateral displacement is calculated by using the moment area method of idealized curvature distribution along the wall height. The generalized lateral load-displacement relationship is in good agreement with test result, even at the descending branch after ultimate strength of shear walls.

• Journal of Wetlands Research
• /
• v.15 no.2
• /
• pp.233-250
• /
• 2013

Gradually or radically change how the characteristics of the climate characteristic using change point analysis for the precipitation indicators were investigated. Significantly the amount, extreme and frequency were separated by precipitation indicators, each indicator RIA(Rainfall Index for Amount), RIE(Rainfall Index for Extremes) and RIF(Rainfall Index for Frequency) was defined. Bayesian Change Point was applied to investigate changing over time of precipitation indicators calculated. As the result of analysis, precipitation indicators in South Korea was found to recently increase all indicators except for the annual precipitation days and 200-yr precipitation. RIA revealed that there was a very clear point of significance for the change in Ulleungdo, Relatively significant results for RIE were identified in Gumi, Jecheon and Seogwipo. Also, since the 1990s, an increase in the number of variation points, and the horizontal width of the fluctuation point was being relatively wider. Based on these results, rethink the precipitation on the assumption of stationarity was judged necessary.

• Journal of Korean Society of Water and Wastewater
• /
• v.23 no.3
• /
• pp.345-352
• /
• 2009

The purpose of inlet baffle is to distribute the flow uniformly over the entire cross-sectional area of the sedimentation basin. The goal when designing this baffle is to achieve some head loss while keeping the velocity gradients through the ports equal to the velocity gradient in the end of the flocculator, so as to not break up the flocs. Sedimentation tank performance is strongly influenced by hydrodynamic and physical effects such as inlet design. This study was conducted to evaluate the effect of open ratio of the inlet baffle on hydraulic behavior within a rectangular sedimentation basin using CFD simulation and ADV technique. In order to verify the CFD simulation, we measured the factual velocity at 18 points in the full-scale sedimentation basin at Y water treatment plant. Good agreement was obtained between the CFD predictions and the experimentally measured data. From the simulation results of the existing basin with 7.4 % open ratio, it was investigated that extreme decrease in velocity occurred in the middle of basin. Since then, flow features was unstable. The region which the velocity decrease rapidly moved forward to the flow direction in proportion to the increase of inflow velocity. Also, it was investigated that the flow characteristic of 6.0 % open ratio was significantly different from 7.4 % open ratio at the same configuration condition. These results are a clear indication that inflow momentum and open ratio are the parameters affecting the characteristics of hydraulic patterns. The influence of these parameters on the sedimentation performance requires further study.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.1
• /
• pp.77-82
• /
• 2004

In this paper we present a barcode reader to decode two-dimensional symbology PDF417 and propose a novel method to extract the bar-space Patterns directly from the gray-level barcode image, which employs the location and the distance between extreme points of each row or column of the barcode image. This algerian proves to be very robust from the high convolutional distortion environments such as defocussing and warping, even under badly illuminating condition. If the scanned barcode image is a result of the convolution of a Gaussian-shaped point spread function with a hi-level image, popular image segmentation methods such as image thresholding can not distinguish between very narrow bar-space patterns. The Proposed algorithm shows improved Performance over current barcode readers.

• Wind and Structures
• /
• v.27 no.3
• /
• pp.163-173
• /
• 2018

The design wind pressure for low-rise buildings in the ASCE 7-10 is defined by procedures that are categorized into the Main Wind Force-Resisting System (MWFRS) and the Components and Cladding (C&C). Some of these procedures were originally developed based on steel portal frames of industrial buildings, while the residential structures are a completely different structural system, most of which are designed as low-rise light-frame wood constructions. The purpose of this study is to discuss the rationality (or irrationality) of the extension of the wind loads calculated by the ASCE 7-10 to the light-frame wood residential buildings that represent the most vulnerable structures under extreme wind conditions. To serve this purpose, the same approach as used in the development of Chapter 28 of the ASCE 7-10 that envelops peak responses is adopted in the present study. Database-assisted design (DAD) methodology is used by applying the dynamic wind loads from Louisiana State University (LSU) database on a typical residential building model to assess the applicability of the standard by comparing the induced responses. Rather than the postulated critical member demands on the industrial building such as the bending moments at the knee, the maximum values at the critical points for wood frame buildings under wind loads are used as indicators for the comparison. Then, the critical members are identified through these indicators in terms of the displacement or the uplift force at connections and roof envelope. As a result, some situations for each of the ASCE 7 procedures yielding unconservative wind loads on the typical low-rise residential building are identified.

• The Journal of The Korea Institute of Intelligent Transport Systems
• /
• v.15 no.4
• /
• pp.68-80
• /
• 2016

This study proposes the traffic prediction and optimal traffic control system based on cell transmission model and genetic algorithm in cloud environment. The proposed prediction and control system consists of four parts. 1) Data preprocessing module detects and imputes the corrupted data and missing data points. 2) Data-driven traffic prediction module predicts the future traffic state using Multi-level K-Nearest Neighbor (MK-NN) Algorithm with stored historical data in SQL database. 3) Online traffic simulation module simulates the future traffic state in various situations including accident, road work, and extreme weather condition with predicted traffic data by MK-NN. 4) Optimal road control module produces the control strategy for large road network with cell transmission model and genetic algorithm. The results show that proposed system can effectively reduce the Vehicle Hours Traveled upto 60%.

• Journal of the Korea Society of Computer and Information
• /
• v.16 no.12
• /
• pp.93-102
• /
• 2011

This paper presents a walking guidance system for blind pedestrians in an outdoor environment using just one single camera. Unlike many existing travel-aid systems that rely on stereo-vision, the proposed system aims to get necessary information of the road environment by using just single camera fixed at the belly of the user. To achieve this goal, a top-view image of the road is used, on which obstacles are detected by first extracting local extreme points and then verified by the polar edge histogram. Meanwhile, user motion is estimated by using optical flow in an area close to the user. Based on these information extracted from image domain, an audio message generation scheme is proposed to deliver guidance instructions via synthetic voice to the blind user. Experiments with several sidewalk video-clips show that the proposed walking guidance system is able to provide useful guidance instructions under certain sidewalk environments.

• Journal of the Ergonomics Society of Korea
• /
• v.31 no.3
• /
• pp.437-444
• /
• 2012

The purpose of this study was to suggest appropriate human model for ergonomic evaluation considering working postures on 3D space. Background: Traditionally extreme design rules have been widely utilized at the stage of designing products. Body size of 5th percentile and 95th percentile in stature has been generally selected for controllability and clearance evaluation, respectively. However, these rules had limitations in reflecting working posture in ergonomic evaluation. Method: In order to define working posture on 3D space, not only sagittal plane but also lateral plane was considered. Kinematic linkage body model was utilized for representation of working posture. By utilizing the anthropometric data of 2,836 South Korean male populations, the point cloud for end points of linkage models was derived. The individuals who were lacking in certain controllability were selected as human models for the evaluation. Result: In case of standing posture it was found that conventional approach is proper for all controllability evaluations. Contrary to standing posture, tall people had less controllability on control location below shoulder point in sitting posture. Conclusion: From the derived proper range on controllability, ergonomic evaluation rule was suggested according to working posture especially in standing and sitting. Application: The results of the study are expected to aid in selection of appropriate human model for ergonomic evaluation and to improve the usability of products and work space.

• Journal of the Korean Society of Food Culture
• /
• v.10 no.1
• /
• pp.67-74
• /
• 1995

This study researched microbial change of quality according to the various phases of product flow of cooked pea and rice, cold cucumber and seaweed soup, soybean sprouts japchae feeding urban type of a commissary school and a satellite school in Daejeon area, also it suggested the possibility that the central commissary foodservice system can be established and utilized more developmental to identify its food of variation of temperature and state of safety unitl 3 hours after cooking for the case of delay of distribution and holding because of the satellite school of geographical location and traffic problem. The critical Control Points identified for each category of menu items were: Boiled pea and rice: inadequate distribution, holding and storing before assembly; Cold cucumber and seaweed soup: pre-preparation and post-preparation after cooking; Soybean sprouts japchae: Pre-preparation, post-preparation and storing. As the result of observation of the variation of temperature and microbial safety according to the delay of distribution and holding for each food, all of them were relatively safe until 3 hours after cooking, but cold cucumber and seaweed soup being stored for 3 hours, the value of E. coli is $10^3$ CFU/g. The variation of temperature was more extreme in soybean sprouts japchae than cooked pea and rice and cold cucumber and seaweed soup. It was proved that the stainless container was excellent and that adequate holding container should be used.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2011.05a
• /
• pp.27-31
• /
• 2011

우리나라의 지점들은 강우자료 관측기간이 다른 나라에 비해 상대적으로 짧고 50년이 넘는 지점이 적기 때문에 지점빈도해석에 의한 확률강우량 추정시 불확실성을 내포하는 문제점을 갖고 있다. 또한, 긴 재현기간에 대한 확률강우량 추정시 더 큰 불확실성이 내포되는데 이러한 이유로 짧은 강우 관측기간의 문제를 보완하고자 지역빈도해석 기법에 대한 연구가 진행되고 있다. 본 연구에서는 전국의 838개소 지점자료로부터 지속기간별 연 최대 강우자료를 추출하였으며, FORGEX 기법의 절차에 따라 확률강우량을 추정하고자 하는 대상지점을 중심으로 네트워크를 구성하였다. 강우자료에 대하여 자료 이상치 보정 후 지속시간별 연 최대강우량 자료를 추출하여 신뢰성 있는 자료를 구축하였다. 구축된 자료를 토대로 중앙값(median)을 이용하여 표준화하였으며 자료 보존기간이 상대적으로 긴 대상지점들을 중심으로 네트워크를 형성하였다. 네트워크별로 pooled points 자료와 netmax 자료를 매년마다 추출하여 구축하였고 이 자료를 이용하여 성장곡선을 유도한 뒤 긴 재현기간에 대한 확률강우량을 구하였다. 또한, 우리나라 강우자료의 지역빈도해석에 적합한 모집단 성장곡선으로부터 netmax 자료의 분포 위치를 조사하기 위하여 강우지점자료를 토대로 기존의 영국에서 사용된 $lnN_e$식이 아닌 새로운 $lnN_e$식을 산정하여 FORGEX기법을 적용하였다. $lnN_e$식은 GEV분포를 토대로 기상청 산하 545개소 지점자료를 이용하여 산정하였다. 지점빈도해석과 FORGEX 그리고 새로운 $lnN_e$식이 도입된 FORGEX기법을 적용하였고, 긴 재현기간에 대한 확률강우량 값을 비교 분석하였다.