• Journal of Advanced Marine Engineering and Technology
• /
• 제32권5호
• /
• pp.670-676
• /
• 2008

A diesel engine requires a high Performance of lubrication because of the extreme conditions such as high temperature and pressure during combustion process in a cylinder. Many researches to improve the lubrication performance on the extreme condition have been executed. The lubricant oil suspended with nano-metal particles is the one of the measure. In this study, the nano-lubricant oil is applied on a commercial diesel engine, and the engine performance is tested. The results show the increase of maximum torque and the decrease of cylinder pressure, exhaust gas temperature, CO emission.

• 동력기계공학회지
• /
• 제17권1호
• /
• pp.77-84
• /
• 2013

The proportional pressure control valve that was used to relief valve has different dynamic characteristics on each case. Because this valve has different assembling or processing error and environmental condition. However, a customer who used the relief valve wants to have a steadily performance even if the dynamic characteristics of valve was changed. For this reason, the manufacturer try to make the robust controller that has simple structure. This paper concerns about the design of robust controller that didn't affected by plant parameter's changing. The control strategy is a model reference control that conducted by on line identification problem, gradient method and Lyapunov equation. This adaptvie control law's validity that this paper deal with was confirmed by an results of step response test or hysteresis test.

• Smart Structures and Systems
• /
• 제32권4호
• /
• pp.219-233
• /
• 2023

Crack width is an important indicator to evaluate the health condition of the concrete structure. The crack width is measured by manual using crack width gauge commonly, which is time-consuming and laborious. In this paper, we have proposed a fast and simplified crack width quantification method via deep Q learning and geometric calculation. Firstly, the crack edge is extracted by using U-Net network and edge detection operator. Then, the intelligent decision of is made by the deep Q learning model. Further, the geometric calculation method based on endpoint and curvature extreme point detection is proposed. Finally, a case study is carried out to demonstrate the effectiveness of the proposed method, achieving high precision in the real crack width quantification.

• 한국산업융합학회 논문집
• /
• 제7권4호
• /
• pp.419-424
• /
• 2004

In order to increase the efficiency of the sawdust machine, the helical type drums with an oblique cutting condition (3D) were developed. The preexisting drums have an orthogonal cutting condition (2D) considering of a saw cutter and a wood cutting pattern. Unfortunately, the disadvantages of this type drum are the big cutting resistance, the high cost of a cutting power and the extreme occurrence of a vibration. To improve this shortcoming, the helical type drum with an oblique cutting condition was developed. Therefore, this type drum decreased the vibration and the cutting resistance of the sawdust machine, and also improved the productivity of 30% or more and the porosity of the sawdust.

• 한국공작기계학회:학술대회논문집
• /
• 한국공작기계학회 2004년도 춘계학술대회 논문집
• /
• pp.88-92
• /
• 2004

We developed a helical type drum with an oblique cutting condition for sawdust machine. The existing drum has an orthogonal cutting(2D) condition considering of saw cutter and wood cutting pattern. Additional disadvantage of this type include big cutting resistance, high cost of cutting power and extreme occurrence of vibrations. To improve this shortcoming, we developed a helical type drum with an oblique cutting(3D) condition, therefore, this type drum decreased the vibration and cutting resistance of sawdust machine, and also improved productivity and sawdust porosity.

• 대한토목학회논문집
• /
• 제32권6C호
• /
• pp.275-284
• /
• 2012

남극대륙은 바람이 강하며 지구상에서 가장 기온이 낮고 건조한 극한환경 조건으로서 지표면의 암석은 동결-융해에 의해 암석의 역학적 특성이 변해왔다. 극지 암석의 지반공학적 특성을 이해하기 위하여 남극에서 직접 암석을 채취하여 암석의 물리적 역학적 특성을 분석하였다. 서남극 케이프 벅스 및 동남극 테라노바 만의 암석은 국내 편마암이 보이는 대표적인 물성 값의 범위내에 존재하고 있었으며, 케이프 벅스의 노출된 암석이 테라노바 만에 비하여 암반 강도가 큰 것으로 나타났다. 테라노바 만의 지표에 노출된 암석의 평균 흡수율은 0.56%, 평균 P파 속도는 3,717m/s, 일축압축 강도는 109MPa로 측정되었으며, 시추조사로부터 채취한 심도 2.9m 이상의 암석 평균 흡수율은 0.24%, 평균 P파 속도는 4,670m/s, 일축압축 강도는 88MPa로 측정되었다. 테라노바 만의 지표면에 노출된 암석과 심부에서 채취한 암석을 비교한 결과, 노출된 암석은 동결-융해의 영향으로 판단되는 역학적 특성 변화는 나타나지 않았으나 흡수율-P파 속도 변화의 물리적 특성 변화는 잘 나타났다.

• Geomechanics and Engineering
• /
• 제31권5호
• /
• pp.439-452
• /
• 2022

A forecast of slope behavior during catastrophic events, such as earthquakes is crucial to recognize the risk of slope failure. This paper endeavors to eliminate the significant supposition of predefined slip surfaces in the slope stability analysis, which questions the relevance of simple conventional methods under seismic conditions. To overcome such limitations, a methodology dependent on the slip line hypothesis, which permits an automatic generation of slip surfaces, is embraced to trace the extreme slope face under static and seismic conditions. The effect of earthquakes is considered using the pseudo-static approach. The current outcomes developed from a parametric study endorse a non-linear slope surface as the extreme profile, which is in accordance with the geomorphological aspect of slopes. The proposed methodology is compared with the finite element limit analysis to ensure credibility. Through the design charts obtained from the current investigation, the stability of slopes can be assessed under seismic conditions. It can be observed that the extreme slope profile demands a flat configuration to endure the condition of the limiting equilibrium at a higher level of seismicity. However, a concurrent enhancement in the shear strength of the slope medium suppresses this tendency by offering greater resistance to the seismic inertial forces induced in the medium. Unlike the traditional linear slopes, the extreme slope profiles mostly exhibit a steeper layout over a significant part of the slope height, thus ensuring a more optimized solution to the slope stability problem. Further, the susceptibility of the Longnan slope failure in the Huining-Wudu seismic belt is predicted using the current plasticity approach, which is found to be in close agreement with a case study reported in the literature. Finally, the concept of equivalent single or multi-tiered planar slopes is explored through an example problem, which exhibits the appropriateness of the proposed non-linear slope geometry under actual field conditions.

• 대기
• /
• 제32권1호
• /
• pp.1-15
• /
• 2022

Recently, Japan's Meteorological Research Institute presented the d4PDF database (Database for Policy Decision-Making for Future Climate Change, d4PDF) through large-scale climate ensemble simulations to overcome uncertainty arising from variability when the general circulation model represents extreme-scale precipitation. In this study, the change of precipitation characteristics between the historical and future climate conditions in the Yongdam-dam basin was analyzed using the d4PDF data. The result shows that annual mean precipitation and seasonal mean precipitation increased by more than 10% in future climate conditions. This study also performed an analysis on the change of the return period rainfall. The annual maximum daily rainfall was extracted for each climatic condition, and the rainfall with each return period was estimated. In this process, we represent the extreme-scale rainfall corresponding to a very long return period without any statistical model and method as the d4PDF provides rainfall data during 3,000 years for historical climate conditions and during 5,400 years for future climate conditions. The rainfall with a 50-year return period under future climate conditions exceeded the rainfall with a 100-year return period under historical climate conditions. Consequently, in future climate conditions, the magnitude of rainfall increased at the same return period and, the return period decreased at the same magnitude of rainfall. In this study, by using the d4PDF data, it was possible to analyze the change in extreme magnitude of rainfall.

• 한국수자원학회논문집
• /
• 제51권10호
• /
• pp.905-916
• /
• 2018

본 연구의 목적은 금강유역($9,645.5km^2$)을 대상으로 극한 기후변화 사상에 따른 수문 및 유황의 변동을 평가하는 것이다. 본 연구에서는 객관적인 극한 기후변화 사상을 평가하기 위해 강우관련 극한지수(STARDEX)를 적용하고, GCM 10개의 RCP 8.5 기후변화 시나리오에 대해 4개의 평가기간별(Historical: 1975~2005, 2020s: 2011~2040, 2050s: 2041~2070, 2080s: 2071~2100)로 분석하였다. 분석 결과 5개의 습윤(CESM1-BGC, HadGEM2-ES), 중간(MPI-ESM-MR) 건조(INM-CM4, FGOALS-s2) 극한 기후변화 사상 시나리오를 선정하여 SWAT 모형에 적용하였다. 2080s 기간에서 중간시나리오 대비 2080s의 증발산은 -3.2~+3.1 mm로 변화하였고, 2080s의 총 유출량은 $+5.5{\sim}+128.4m^3/s$ 변화하였다. 건조한 시나리오의 경우 2020s 중간시나리오대비 큰 변화를 보였다. 건조한 시나리오에서의 2020s의 증발산량은 -16.8~-13.3 mm의 변화를 보였고, 총 유출량은 $-264.0{\sim}132.3m^3/s$의 변화를 보였다. 유황 변동의 경우, 2080s 기간의 습윤한 시나리오에서 CFR은 +4.2~+10.5, 2020s 기간의 건조한 시나리오에서는 +1.7~2.6으로 변화 하였다. 극한 기후변화 시나리오를 적용한 금강유역의 수문인자의 변화에 따라 유황분석을 실시한 결과, INM-CM4는 극한 건조상태를 나타내기에 적절한 시나리오로 나타났고 FGOALS-s2는 유황변동이 큰 가뭄 상태 분석에 적절한 시나리오로 나타났다. HadGEM2-ES는 유황변동이 작게 나타났기 때문에 최대유량 분석 시 활용 가능한 시나리오로 평가되었고, CESM1-BGC의 경우 유황변동이 큰 것으로 나타나 극한 홍수 분석 시 적용할 수 있는 시나리오로 평가되었다.

• 한국해양공학회지
• /
• 제26권4호
• /
• pp.77-85
• /
• 2012

A study was performed on the design of a mooring line to maintain the position of a floating WEC (wave energy conversion) system. The procedure to design a mooring line is set up and the safety of the designed mooring system is evaluated using commercial software, Orcaflex. The characteristics curve for one line is analyzed to determine the properties and pretension of a mooring line. While considering the ocean environmental condition and importance of a floating WEC system, a multi-line layout is determined. A 4-point mooring system with 4 lines shows the instability in the yaw motion of the floating WEC system under a designed ocean environmental condition. The redesigned 4-point mooring system with 8 lines is found to be safe on the condition of a harsh ocean environment. The floating WEC system with the redesigned mooring system also shows stable motion in surge and pitch under operating conditions. From a parametric study on the mooring line length, the extreme value of the mooring line tension is found to be very sensitive to the pretension and length of mooring line. The results of this study can contribute to the establishment of a design procedure for mooring lines.