• 한국약용작물학회지
• /
• 제21권2호
• /
• pp.105-111
• /
• 2013

This study was performed to investigate the enhancement of immunomodulatory activities of Lithospermum erythrorhizon by extreme process. The extracts are WE100 (water extract for 24 hours at $100^{\circ}C$), WE80 (water extract for 24 hours at $80^{\circ}C$), EE (70% ethyl alcohol extract for 24 hours at $80^{\circ}C$) and EPE (extreme process for 30 minutes at $25^{\circ}C$, 500 MPa after 70% ethyl alcohol extracts for 3 hours at 40, 50, $60^{\circ}C$). Extraction yield was increased up to 5~10% by extreme process, compare to the normal extraction such as water solvent extraction, 70% ethyl alcohol solvent extraction. The cytotoxicity of the extracts was showed in the range of 12.68~15.89% at $1.0mg/m{\ell}$ for human lung cell (HEL299). The EPE40 was showed the lowest cytotoxicity 12.68%. The EPE60 extracted by extreme process increased the growth of human B and T cells up to $12.12{\times}10^4\;cells/m{\ell}$ and $14.88{\times}10^4\;cells/m{\ell}$, respectively and the EPE60 greatly increased the cytokine secretion of both IL-6 and TNF-${\alpha}$. The extracts by extreme process also exhibited higher levels of nitric oxide production from macrophages than the lipopolysaccaharides. It can be concluded that Lithospermum erythrorhizon has immune activities and The extreme process could increase higher immune activities possibly by immunomodulatory compounds.

• 한국기계가공학회지
• /
• 제18권11호
• /
• pp.103-108
• /
• 2019

The cooling rate and the uniformity of mold temperature, in the injection molding process, possess great influences on the productivity and quality of replications. The conformal cooling channel, which is of a uniform spacing from the mold cavity by the metal additive manufacturing process, receives much attention recently. The purpose of this study is to develop a mold core with a curved conformal cooling channel for a pottery-shaped thick-wall cosmetic container through the hybrid method of direct metal tooling (DMT) process. In this study, we design a mold core that contains the curved cooling channel for the container. A method that divides the cavity is proposed and the DMT process is carried out to form the curved cooling channel. The test mold core, with the curved conformal cooling channel, has been fabricated by the proposed method to confirm the feasibility of the design concept. We show that no leakage is observed for the additive manufactured test mold core, and its physical properties demonstrate that it can be sufficiently used as the injection mold core.

• Communications for Statistical Applications and Methods
• /
• 제15권5호
• /
• pp.793-798
• /
• 2008

Extreme value inference deals with fitting the generalized extreme value distribution model and the generalized Pareto distribution model, which are recently combined to give a single model, namely a two-dimensional non-homogeneous Poisson exceedance point process model. In this paper, we extend the two-dimensional non-homogeneous Poisson process model to include non-stationary effect or dependence on covariates and then derive the likelihood for the extended model.

• 한국소성가공학회:학술대회논문집
• /
• 한국소성가공학회 2003년도 춘계학술대회논문집
• /
• pp.258-261
• /
• 2003

In this study, finite element analysis for multi-stage deep drawing process of rectangular configuration with extreme aspect ratio is carried out especially for the blank design. The analysis of rectangular deep drawing process with extreme aspect ratio is likewise very difficult with respect to the design process parameters including the intermediate die profile. In order to solve the difficulties, numerical approach using finite element method is performed in the present analysis and design. A series of experiments for multi-stage rectangular deep drawing process are conducted and the deformed configuration is investigated by comparing with the results of the finite element analysis. Additionally, to minimize amount of removal material after trimming process, finite element simulation is applied for the blank modification. The analysis incorporates brick elements for a rigid-plastic finite element method with an explicit time integration scheme using LS-DYNA3D.

• 한국정보통신학회논문지
• /
• 제7권6호
• /
• pp.1351-1359
• /
• 2003

극한 프로그래밍은 빠르게 변화되는 사업 환경에 기민하게 대응하는 애자일 소프트웨어 개발 방법론 중에서 가장 대표적인 방법론이다. 소프트웨어 산업이 성숙됨에 따라 소프트웨어 품질 요소중 사용성이 점차 강조되고 있으나, 극한 프로그래밍에서 사용성을 확보하기 위한 노력이 부족한 실정이다. 극한 프로그래밍의 사용성 향상을 위하여 본 논문에서는 소프트웨어 생명주기를 조사, 계획, 릴리즈 반복, 제품화, 유지보수, 사망의 6단계로 정의한다. 사용성 평가를 위한 통합시험과 인수시험을 포함한 11개의 활동을 정의하여 사용성을 향상시킬수 있는 극한 프로그래밍 프로세서를 제안한다. 제안한 프로세서의 타당성을 4가지 측면에서 확인하였다. 제안한 프로세스는 극한 프로그래밍 프로세스가 인수시험 활동을 지원하도록 개선하였으며, 극한 프로그래밍 프로세스가 CMM 레벨4를 지원하도록 하며, CMM 품질보증 실무를 지원하도록 하였다.

• 한국기계가공학회지
• /
• 제17권2호
• /
• pp.83-88
• /
• 2018

Additive manufacturing (AM) technologies have attracted wide attention as key technologies for the next industrial revolution. Among AM technologies using various materials, powder bed fusion (PBF) processes and direct energy deposition (DED) are representative of the metal 3-D printing process. Both of these processes have a common feature that the laser is used as a heat source to fabricate the 3-D shape through melting of the metal powder and solidification. However, the material properties of the deposited metals differ when produced by different process conditions and methods. 17-4 precipitation-hardening stainless steel (17-4PH SS) is widely used in the field of aircraft, chemical, and nuclear industries because of its good mechanical properties and excellent corrosion resistance. In this study, we investigated the differences in microstructure and mechanical properties of deposited 17-4PH SS by PBF and DED processes, including the heat treatment effect.

• Communications for Statistical Applications and Methods
• /
• 제16권5호
• /
• pp.803-812
• /
• 2009

금융자료에 극단값이론을 적용하는 것은 위험관리에서 중요한 최신 통계기법 중의 하나라고 할 수 있다. 극단값분석에서 전통적으로 사용해 오던 연간 최대값방법은 시계열자료의 연간 최대값들에 대하여 일반화 극단값분포를 적합시키는 것이고, 최근 대안으로 널리 사용되고 있는 분계점 방법은 시계열자료 중 충분히 큰 하나의 분계점을 넘어서는 초과값들에 대하여 일반화파레토분포를 적합시키는 것이다. 그러나, 보다 실질적인 방법은 분계점을 넘어서는 초과값들을 하나의 점과정으로 해석하는 것인데, 즉 초과값들의 초과시점과 초과여분을 점근적으로 비동질 포아송과정을 갖는 하나의 2차원 점과정으로 간주하는 것이다. 본 논문에서는 이러한 2차원 비동질 포아송과정 모형을 1982.1.4부터 2008.12.31까지 수집된 원/달러 환율 시계열자료로부터 계산된 일별 환율투자손실률, 즉 일별 로그 손실률에 적용한다. 여기서 주된 관심은 10년 혹은 50년에 한번 정도 발생하는 대형 손실률 수준과 같은 극단분위수를 어떻게 추정하느냐 하는 것이다.

• Ocean Systems Engineering
• /
• 제4권4호
• /
• pp.293-308
• /
• 2014

Unlike the traditional displacement type vessels, the high speed planing crafts are supported by the lift forces which are highly non-linear. This non-linear phenomenon causes their motions in an irregular seaway to be non-Gaussian. In general, it may not be possible to express the probability distribution of such processes by an analytical formula. Also the process might not be stationary or ergodic in which case the statistical behavior of the motion to be constantly changing with time. Therefore the extreme values of such a process can no longer be calculated using the analytical formulae applicable to Gaussian processes. Since closed form analytical solutions do not exist, recourse is taken to fitting a distribution to the data and estimating the statistical properties of the process from this fitted probability distribution. The peaks over threshold analysis and fitting of the Generalized Pareto Distribution are explored in this paper as an alternative to Weibull, Generalized Gamma and Rayleigh distributions in predicting the short term extreme value of a random process.

• 한국기계가공학회지
• /
• 제17권2호
• /
• pp.89-94
• /
• 2018

Due to industrial advancement and environmental concerns, there is a demand for light-weight material parts with high-performance characteristics. In order to meet this demand, various studies have been conducted on developing high-performance castings to achieve composite features by coating only specific parts that require high performance, with dissimilar joining, rather than coating the entire material part. This study analyzed the possibility of forming a local composite layer on an aluminum alloy through evaporation pattern casting, and the effects of parameters on the aluminum alloy.

• Tribology and Lubricants
• /
• 제35권6호
• /
• pp.362-368
• /
• 2019

In this study, mechanical and tribological properties were investigated by varying the process temperature (50, 100, 125 and 150℃) to reduce internal stress. The internal stress reduction by thermal dissociation ta-C coating film with increasing temperature is confirmed through the curvature radius of the ta-C coating according to the temperature of the SUS plate. As the coating temperature increased, the mechanical properties (hardness, modulus, toughness) deteriorated, which is in agreement with the Raman analysis results. As the temperature increased, the sp² phase ratio increased owing to the dissociation of the sp³ phase. The friction and wear properties are related to the process temperature during ta-C coating. Low friction and wear properties are observed in high hardness samples manufactured at 50℃, and wear resistance properties decreased with increasing temperature. The contact area is expected to increase owing to the decrease of hardness(72 GPa to 39 GPa) and fracture toughness with increasing temperature which accelerated wear because of the debris generated. It was confirmed that at process temperature of over than 100℃, the bond structure of the carbon film changed, and the effect of excellent internal stress was reduced. However, the wear resistance simultaneously decreased owing to the reduction in fracture toughness. Therefore, in order to increase industrial utilization, optimum temperature conditions that reduce internal stress and retain mechanical properties.