• 제목/요약/키워드: Extraction-spectrophotometric

검색결과 58건 처리시간 0.021초

납-티오황산 착물생성과 구리치환에 의한 미량 납(II)의 비색분석에 관한 연구 (Spectrophotometric Determination of Trace Lead(II) After Extraction of Lead-Thiosulfate Complex into Aliquat336-CHCl$_3$ and Replacement by Cu)

  • Lee, Seok-Ki;Joung, Chang-Ung
    • 한국환경보건학회지
    • /
    • 제24권3호
    • /
    • pp.1-5
    • /
    • 1998
  • A spectrophotometric method was developed for the acidic solution stripped after an extraction of 0.5 to 2.5 ppm of Lead(II) from 50 mL of $Na_2S_2O_3$ solution into chloroform as the ion-pairs formed between their thiosulfate complexes and alkylamine, Aliquat336. Pb(II) in the stripped solution forms an complex with DDTC in pH 7.3 buffer solution, and was developed in yellow by copper replacement. The ydlow-colored solution have the maximum absorbance at 435 nm in the measurement of absorbance by UV-Visible spectrophotometer. The interference ions such as Fe(III), Hg (II), Al(III), Co, Cu, Ni, Zn, Ca, Sn, have great effects on the extraction, but they were overcomed by the usage of adequate masking agents before an extraction. At last, a good result was obtained in applying this method to synthetic water.

  • PDF

Spectrophotometric Determination of Palladium after Solid-liquid Extraction with 4-(2-Pyridylazo)-resorcinol at 90°C

  • Dong, Yanjie;Gai, Ke
    • Bulletin of the Korean Chemical Society
    • /
    • 제26권6호
    • /
    • pp.943-946
    • /
    • 2005
  • An effective spectrophotometric determination of palladium with 4-(2-pyridylazo)-resorcinol (PAR) using molten naphthalene as a diluent has been studied. A red complex of palladium with PAR is formed at 90 ${^{\circ}C}$. In the range of pH 9.0-11.0, the complex is quantitatively extracted into molten naphthalene. The organic phase is anhydrously dissolved in $CHCl_3$ to be determined spectrophotometrically at 520 nm against the reagent blank. Beer’s law is obeyed over the concentration range of 0.1-2 ${\mu}g{\cdot}mL^{-1}$. The molar absorptivity and Sandell’s sensitivity are 8.0 ${\times}\;10^5\;L{\cdot}mol^{-1}{\cdot}cm^{-}1\;and\;0.49\;{\mu}g{\cdot}cm^{-2}$ respectively. From the results of tolerance limits, it was found that there was no interferences were observed for most of the ions examined and those somewhat high interferences by Co(II), Fe(II) and Bi(III) could be effectively masked by EDTA.

티몰블루와 함께 이온쌍으로서 약제 샘플에서 시메티딘의 추출-분광광도 측정 (Extraction-Spectrophotometric Determination of Cimetidine in Pharmaceutical Samples as an Ion Pair with Bromothymol Blue)

  • Zargar, B.;Pourreza, N.;Shahrouz, M.
    • 대한화학회지
    • /
    • 제55권1호
    • /
    • pp.46-49
    • /
    • 2011
  • 감도가 높고 선택적인 추출-분광광도법은 미량의 시메티딘의 측정을 위해 개발되어 왔다. 이 방법은 클로로포름안에 브로모티몰 블루(BTB)와 함께 이온 쌍으로 시메티딘의 추출에 기초했다. 그리고 417 nm에서 흡광도를 측정하고 있다. pH, BTB의 농도, 클로로포름의 부피, 섞는 시간과 같은 다른 변수들의 효과를 연구하였다. 또한, 추출에서 간섭이온의 효과도 연구하였다. 보정곡선은 0.9997의 상관계수와 함께 0.25~8 ug/mL의 범위에서 선형이다. 3Sb에 기초한 검출한계는 0.14 ug/mL이고 시메티딘의 0.1과 4.0 ug/mL의 10번 측정에 대한 상대표준편차는 3.2와 1.49%이었다. 제안된 방법은 좋은 회수와 함께 약제 샘플에서 시메티딘의 측정에 적용되었다.

2-Oximino-1-indanone을 이용한 Pt(IV) ion의 정량에 관한 연구 (Spectrophotometric Determination of Platinum (IV) with 2-Oximino-1-indanone)

  • 김정균;유미경;원미숙;심윤보;고영심
    • 약학회지
    • /
    • 제28권2호
    • /
    • pp.61-67
    • /
    • 1984
  • A method is described for the spectrophotometric determination of platinum (IV) with 2-oximino-1-indanone based on solvent extraction of Pt:2-oximino-1-indanone complex. The 2-oximino-1-indanone reacted with Pt(IV) to form a dark-orange complex which shows a characterisic maximum absorption at 342nm. The optimum PH for the platinum extraction lies between 5.4~8.0. Beer's law obeys up to 0.98-16.3ppm of platinum (IV) and the molar absorption coefficient is $1.06{\times}10^{-4}L.mol^{-1}.cm^{-1}$. The relative standard deviation of the method was $\times2.1%$. The composition of the complex is estimated to be Pt : In= 1 : 1, by the mole ratio method and ion exchange resin experiment. The optimum condition for the determination of platinum has been studied in detail. The 2-oximin-1-indanone is found to be a selectivereagent for the determination of platinum, since the synthesixed 2-oximino-1-indanone did not react with other metals such as cobalt, cadmium, copper, manganese nickel, iron, lead and zinc, to form the complex. In this studies, we have also clarified Sindhwani and Singh's spectrophotometric determination data of various metals with acenaphthenequinone monooxime (Talanta 20,248, 1973), whose results were not correct.

  • PDF

역추출과 PAR법에 의한 수질중 미량 수은의 비색정량에 관한 연구 (Colorimetric Determination of Trace Mercury(II) in Water by Back Extraction and PAR)

  • 정창웅
    • 한국환경보건학회지
    • /
    • 제21권3호
    • /
    • pp.96-101
    • /
    • 1995
  • A selective and highly sensitive spectrophotometric measurements have been developed for the determination of trace mercury(II) with thiosulfate and PAR. Hg(II)-thiosulfate complex was extracted into high molecular alkylamine such as quaternary ammonium salt and back extracted into 1 M-HCl solution. The Hg(II)-PAR complex has maximum absorbance at 499 nm and obeys Beer's law in the range of 0.04~1.0 $\mu g/mL$ of mercury(II). The molar absorptivity and Sandell's sensitivity are $6.27\times 10^4 L.mole^{-1} cm^{-1}$ and $3.2\times 10^{-3}g/cm^2$ respectively.

  • PDF

토마토의 품질평가에 관한 연구 - 색 및 공동(空胴) 현상을 중심으로 - (Quality Evaluation of Raw Tomato Fruits - With special reference to color and puffiness -)

  • 이미순;김건희
    • 한국식품과학회지
    • /
    • 제18권5호
    • /
    • pp.335-338
    • /
    • 1986
  • 토마토의 색도를 측정하기 위해 색소의 sequential extraction을 이용한 spectrophotometric technique을 시도하였다. 파장 480nm 와 660nm에서 각기 80% acetone과 chloroform으로 추출된 용액의 흡광도를 합한 다음 두 파장에서의 총 흡광도 차이를 구한 결과 토마토의 숙성(ripening) 정도가 잘 반영되었다. 이러한 측정방법은 토마토 색소의 객관적 측정을 위한 간단하고 신뢰성 있는 방법으로 간주된다.

  • PDF

Tris(1,10-phenathroline) Fe(II) chelate에 의한 undecylenic acid의 흡광광도 정량법 (The spectrophotometric determination of undecylenic acid using tris (1,10-phenanthroline) Fe(II) chelate)

  • 강삼식;백남호
    • 약학회지
    • /
    • 제16권4호
    • /
    • pp.180-185
    • /
    • 1972
  • A new spectrophotometric method was established for the determination of undecylenic acid. The method is based on the solvent extraction into nitrobenzene of the ion pair formed between tris(1,10-phenanthroline)Fe(II) chelate and the anion of undecylenic acid. The maximum absorbance of the extract in the organic phase was at 518nm. A maximum extraction was obtained at pH 9-11, when excess of at least 50-fold(molar) of the phenanthroline-Fe(II) chelate to undecylenic acid was present. The color intensity of the extracted species remained constant at room temperature for the several hours after separation of the organic layer. A linear relationship was obtained over the tested range of 5-20${\gamma}$/ml of undecylenic acid. The effect of several other fungicids on this method was investigated. The method was applied to the determination of undecylenic acid in preparations and the results were in good agreement with those added amounts.

  • PDF

피크린 산에 의한 항히스타민제의 추출분광광도 정량 (Extraction Spectrophotometric Determination of Antihistamines with Picric Acid)

  • 신태용;엄동옥
    • 약학회지
    • /
    • 제37권2호
    • /
    • pp.119-123
    • /
    • 1993
  • A spectrophotomertic method is proposed for the determination of antihistamines. The method is based on solvent extraction of the ion pair formed between antihistamines and colored picric acid into chloroform. The binding state of antihistamines-picric acid complexes were presumed by IR and $^{1}$H-NMR spectra as intermolecular hydrogen bonding. This method was applicable to the determination of antihistamines in the pharamaceutical preparations.

  • PDF

Spectrophotometric Determination of Nitrite Based on Its Reaction with p-Nitroaniline in the Presence of Diphenylamine in Micellar Media

  • Afkhami, Abbas;Masahi, Shokofeh;Bahram, Morteza
    • Bulletin of the Korean Chemical Society
    • /
    • 제25권7호
    • /
    • pp.1009-1011
    • /
    • 2004
  • In the present work a very simple, sensitive and selective spectrophotometric method for the determination of nitrite in micellar media is described. The method is based on the color reaction of nitrite with p-nitroaniline in the presence of diphenylamine in acid media. In order to remove the extraction step, Triton X-100, a non-ionic surfactant was used as micellar media. The optimum reaction conditions such as acid concentration, reagents concentration and effect of time have been studied and the analytical characteristics of the method such as limit of detection, linear range and molar absorptivity have been obtained. The interference of some anions and cations was also tested. The method was applied to the determination of nitrite in real samples.

Determination of Plutonium Present in Highly Radioactive Irradiated Fuel Solution by Spectrophotometric Method

  • Dhamodharan, Krishnan;Pius, Anitha
    • Nuclear Engineering and Technology
    • /
    • 제48권3호
    • /
    • pp.727-732
    • /
    • 2016
  • A simple and rapid spectrophotometric method has been developed to enable the determination of plutonium concentration in an irradiated fuel solution in the presence of all fission products. An excess of ceric ammonium nitrate solution was employed to oxidize all the valence states of plutonium to +6 oxidation state. Interference due to the presence of fission products such as ruthenium and zirconium, and corrosion products such as iron in the envisaged concentration range, as in the irradiated fuel solution, was studied in the determination of plutonium concentration by the direct spectrophotometric method. The stability of plutonium in +6 oxidation state was monitored under experimental conditions as a function of time. Results obtained are reproducible, and this method is applicable to radioactive samples resulting before the solvent extraction process during the reprocessing of fast reactor spent fuel. An analysis of the concentration of plutonium shows a relative standard deviation of <1.2% in standard as well as in simulated conditions. This reflects the fast reactor fuel composition with respect to uranium, plutonium, fission products such as ruthenium and zirconium, and corrosion products such as iron.