• Korean Chemical Engineering Research
• /
• v.53 no.6
• /
• pp.695-702
• /
• 2015

Liquid-liquid extraction (LLE) using various solvents was studied for recovery of acetic acid from a synthetic ethanol fermentation broth. The microbial fermentation of sugars presented in hydrolyzate gives rise to acetic acid as a byproduct. In order to obtain pure ethanol for use as a biofuel, fermentation broth should be subjected to acetic acid removal step and the recovered acetic acid can be put to industrial use. Herein, batch LLE experiments were carried out at $25^{\circ}C$ using a synthetic fermentation broth comprising $20.0g\;l^{-1}$ acetic acid and $5.0g\;l^{-1}$ ethanol. Ethyl acetate (EtOAc), tri-n-octylphosphine oxide (TOPO), tri-n-octylamine (TOA), and tri-n-alkylphosphine oxide (TAPO) were utilized as solvents, and the extraction potential of each solvent was evaluated by varying the organic phase-to-aqueous phase ratios as 0.2, 0.5, 1.0, 2.0, and 4.0. The highest acetic acid extraction yield was achieved with TAPO; however, the lowest ethanol-to-acetic acid extraction ratio was obtained using TOPO. In a single-stage batch extraction, 97.0 % and 92.4 % of acetic acid could be extracted using TAPO and TOPO when the ratio of organic-to-aqueous phases is 4:1 respectively. A higher solvent-to-feed ratio resulted in an increase in the ethanol-to-acetic acid ratio, which decreased both acetic acid purity and acetic acid extraction yield.

• Korean Journal of Food Science and Technology
• /
• v.29 no.3
• /
• pp.509-515
• /
• 1997

Crude papain was extracted from papaya latex under various conditions. Extraction conditions of crude papain were optimized by the response surface methodology (RSM). Extraction yield of papain was affected by concentration of $NaHSO_3$, extraction time and pH. Three independent factors were chosen to determine their effects on the various responses and the function was expressed in terms of a quadratic polynomial equation, which measures the linear, quadratic and interaction effects. According to the results of RSM, the stationary point for quantitatively dependent variable was found to be the maximum point for extraction yield. Optimum conditions of papain extraction were 4% of $NaHSO_3$, 120 min of extraction time and pH 7.6. Under these conditions, 793.16 mg of papain per g latex was extracted from papaya latex.

• Journal of Physiology & Pathology in Korean Medicine
• /
• v.21 no.6
• /
• pp.1431-1436
• /
• 2007

In order to optimize the extract condition and improve physiological activity of the extract form Tricholoma matsutake, experiments related to extraction methods, totale yield, content of total soluble polysaccharide, SOD-like activity, total polyphenol amount, and volatile flavor compound and the others were carried out, results were obtained as following: Compare with traditional hydrothermal extraction method (Hot water extraction : HWEW), it illustrates that the low temperature extraction method which combines a supersonic waves and microwave (Supersonic microwave extraction : SMEW) causes of increasing the total yield, total soluble polysaccharide. As to the anti-oxident effect, SMEW method leds to increasing of the SOD-like activity, total polyphenol amount as well. Also, cytotoxic effect and growth inhibitory effect against cancer cell line are much higher in SMEW method than HWEW method, especially SMEW5 extracts treated by supersonic 15 min. and microwave 120W, 3 min. and 2 times. The main volatile flavor compound and infinitesimal volatile flavor compound both increase significantly by SMEW method. It is concluded the main components of the volatile flavor compounds extracted from Tricholoma matsutake are 1-octen-3-0l, Methyl cinnamate, 2-octeno1 et al. alcohol typies. Consequently, SMEW5 method is considered as the most effective one for anti-oxidant and is prior to any other methods. And the optimun conditions of this method are : supersonic waves (supersonic, 25KHz, 50W) 15 minutes, microwave spectroscopy (microwave, 2,450MHz, 120W) 3 minutes, and every treatment is performed once followed twice repeats.

• ALGAE
• /
• v.28 no.4
• /
• pp.371-378
• /
• 2013

Water and methanolic extracts of Ecklonia cava, a marine brown alga, were prepared by ultrasonic extraction (UE) and conventional extraction (CE) methods. The radical-scavenging activity and the inhibitory effects against hydrogen peroxide ($H_2O_2$)-induced DNA damage of the extracts were investigated. All extracts prepared by CE exhibited higher total polyphenolic content than that in the extracts prepared by UE. Extraction yield and total phenolic content increased as the UE time increased. The radical-scavenging activities increased as the UE time increased. All extracts prepared by CE exhibited higher 1,1-diphenyl-2-pricrylhydrazyl (DPPH) and hydroxyl radical-scavenging activities than did those prepared by UE. Extracts prepared by UE showed stronger scavenging activities on alkyl radical and $H_2O_2$ than those prepared by CE did. Methanolic extract with UE 12 h (100MEU-12h) and methanolic extract with CE 24 h (100MEC-24h) were selected and evaluated by comet assay for their inhibitory effect against $H_2O_2$-induced DNA damage. 100MEU-12h showed slightly greater protective effect against $H_2O_2$-induced DNA damage than 100MEC-24h. Thus, UE can be effectively used as a seaweed extraction technique, and there is potential for scale-up of the extraction process.

• Preventive Nutrition and Food Science
• /
• v.1 no.2
• /
• pp.179-185
• /
• 1996

Extraction yields of thiosulfinates from garlic were studied by using gas-in-liquis-dispersion(GLD) system to maxmize the thiosulfinate extraction. Extracted thiosulfinates were spectrophotometically quantified using synthesized dially1 thiosulfinate. The conditions for maximum extraction were optimized by response surface methodology. The volatile components extracted by various methods, such as hexane extraction, simultaneous steam distillation and GLD system, were compared by using gas chromatography. The results indicated that the thiosulfinate yield was increased by incresaing temperature and nitrogen gas flow rate, while the effects of bubble sizes on thiosulfinate extraction were not significant at the ranges tested. Application of GLD system resulted in extraction of more volatile components than other extraction methods, Therfore, it was suggested that GLD system was one of the efficient extraction methods among the ever introduced ones, for thiosulfinate extraciton.

• Applied Biological Chemistry
• /
• v.51 no.3
• /
• pp.188-193
• /
• 2008

This study was conducted to investigate the effect of moisture content and pressure on extraction yield, crude saponins and ginsenoside contents of puffed Korean ginseng. Puffed ginsengs showed relatively higher extraction yield ($50.0{\sim}62.1%$) and amounts of crude saponins ($19.6{\sim}48.8$ mg/g ginseng) than no-puffed ginseng ($37.6{\pm}0.8%$ and $11.0{\pm}1.0$ mg/g ginseng), respectively. The highest extraction yield and amounts of crude saponins were obtained in 8.0% moisture content sample puffed at 10 $kg_f/cm^2$. In HPLC analysis, amounts of measured major ginsenosides (Rb1, Rb2, Rc, Rd, Re, and Rg1) decreased with increasing puffing pressure, yet contents of almost all major gin senosides were higher than control (no-puffed). On the other hand, ginsenoside Rg3 were produced after puffing suggesting that chemical structure of some ginsenosides might be altered during the puffing process. These results indicate that puffing can increase the extraction yield and crude saponin contents and it could influence the ginsenoside composition.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.37 no.5
• /
• pp.653-659
• /
• 2008

In this study, the optimum pre-heating condition was investigated to improve water extraction yield of Phelinus linteus tea. Pre-heating was carried out using drying oven or hot plate at different temperatures and times, and extraction yield was estimated by measuring optical density at 370 nm and soluble solid content. The highest optical density and soluble solid content of Phelinus linteus tea were observed when pre-heated at $70{\sim}80^{\circ}C$ for 30 minutes in drying oven. Pre-heating in drying oven resulted in also faster color changes of Phelinus linteus tea at lower temperature. According to the organoleptic evaluation, pre-heated Phelinus linteus tea in drying oven at $70{\sim}80^{\circ}C$ for 30 minutes was preferred compared to the non-treated. In conclusion, pre-heating in drying oven at $70{\sim}80^{\circ}C$ for 30 minutes was found to be the most efficient conditions to increase extraction yield of Phelinus linteus tea.

• Korean Journal of Food Science and Technology
• /
• v.33 no.2
• /
• pp.161-165
• /
• 2001

The dietary fiber was extracted from apple pomace with various concentrations of acidic, alkaline solvents and water in $24.4{\sim}29.3%$ yield. The extractions of water-soluble dietary fiber with acidic(6.85%) and alkaline solvent(6.55%) were more effective than the water extraction(6.0%). The higher extraction yield was obtained with increased concentration of acidic or alkaline solvents. The content of galacturonic acid was higher in the order, 0.01 M HCl(77.5%)>0.05 M HCl(76.8%)>$H_2O(76.1%)$>0.05 M NaOH(73.8%)> 0.01 M NaOH(69.0%) and the extraction with acidic solvent showed the highest pectin yield. The color value increased by extraction with solvent in higher concentration. And at equal concentration, the color value of alkaline extract was higher than that of acidic exctract. There was no relationship between the color value and the extraction yield of dietary fiber. In the investigation on the rheological properties, the shear stress increased in proportion to galacturonic acid contents. While water-soluble dietary fiber extracted with acid and water represented Newtonian rheological properties, the alkaline extract was inclined to have converting property from pseudoplastic to Bingham pseudoplastic with increment of alkaline concentration. In the studies on the time-dependence of apparent viscosity, the thixotropic property with hysteresis loop was observed in alkaline extract.

• Applied Chemistry for Engineering
• /
• v.28 no.4
• /
• pp.442-447
• /
• 2017

In this study, we extracted an antioxidant from natural products which are known to have a high antioxidant content and also optimized the extraction process by applying a response surface methodology (RSM). In addition, by measuring the total flavonoids and total polyphenols of the active ingredient extracted persimmon leaf and thistle, the functionality of the active ingredient was evaluated. Both ultrapure water and alcohol were used as extraction solvents and the ratio of ultrapure and alcohol, amount of sample, extraction time, extraction temperature were set as independence variables. Also, the yield, total polyphenols, and flavonoids was set as the response. Optimal extraction conditions were as follows; for persimmon leaf, the extraction time = 3.1 h, ratio of alcohol/ultrapure = 63.4 vol%, and temperature = $54.6^{\circ}C$ while for thistle the extraction time = 2.9 h, ratio of alcohol/ultrapure = 40.7 vol%, and temperature = $68.4^{\circ}C$. Also, the response were as follows; for persimmon leaf, the yield = 27.7%, total polyphenols = 33.2 mg GAE/g, and total flavonoids = 47.8 mg QE/mg dw, whereas for thistle the yield = 27.0%, total polyphenols = 17.9 mg GAE/g, and total flavonoids = 28.8 mg QE/mg dw at the optimal conditions. The overall satisfaction level was 71.7%.

• Applied Chemistry for Engineering
• /
• v.30 no.3
• /
• pp.337-344
• /
• 2019

In this study, an antioxidant was extracted from Lonicera japonica and Sophora japonica L, which was optimized by using the central composite design (CDD) model of response surface methodology (RSM). The response value of CDC model establishes the extraction yield and the 2,2-diphenyl-1-picrylhydrazyl (DPPH) radical scavenging activity. The extraction time, volume ratio of ethanol/ultrapure water, and extraction temperature were selected as quantitative factors. According to the result of CDC, optimal extraction conditions of Lonicera japonica were as follows; the extraction time of 2.08 h, volume ratio of ethanol/ultrapure water of 41.53 vol.%, and extraction temperature of $55.08^{\circ}C$. At these conditions the expected results indicated that the yield and DPPH radical scavenging activity were estimated as 37.88 wt% and 40.37%, respectively. On the other hand, optimal extraction conditions of Sophora japonica L. could be found as the extraction time of 2.13 h, volume ratio of ethanol/ultrapure water of 62.89 vol.%, and temperature of $50.42^{\circ}C$. Under the conditions, the (possible) maximum values of yield and DPPH radical scavenging activity were found as 35.43 wt% and 55.7%, respectively.