• Journal of Conservation Science
• /
• v.31 no.2
• /
• pp.95-104
• /
• 2015

Excavated archaeological cast iron objects in improper storage are quickly corroded and disintegrated into block and powder finally. Hence desalination treatment which is a way of removing internal corrosive factors, especially chloride ion, is an important process. But desalination is often omitted or objects are dehydrated by alcohol because the destruction of objects could occur during desalting. Although current desalting methods mostly use an aqueous alkali solution, $OH^-$ ions of water could accelerate corrosion and broaden internal cracks cause of high surface tension. Therefore this study experimented desalting using ethyl alcohol, which is low surface tension, to investigate an effect of desalination. As a result, desalting using ethyl alcohol showed the similar or more effective results of desalting using water. In addition, as aspects of desalting safety, ethyl alcohol desalting method was smaller destruction of objects and extraction of Fe from the objects than the aqueous alkali solution. However, this study explored the possibility of desalting methods using organic solvent in fieldwork, so the results would provide basic date for making the safe and effective desalting method for archaeological cast iron objects through further experiments.

• Journal of the Korean Institute of Intelligent Systems
• /
• v.25 no.5
• /
• pp.502-508
• /
• 2015

Stereo images have an advantage of calculating depth(distance) values which can not analyze from 2-D images. However, depth information obtained by stereo images has due to following reasons: it can be obtained by computation process; mismatching occurs when stereo matching is processing in occlusion which has an effect on accuracy of calculating depth information. Also, if global method is used for stereo matching, it needs a lot of computation. Therefore, this paper proposes the method obtaining disparity map which can reduce computation time and has higher accuracy than established method. Edge extraction which is image segmentation based on feature is used for improving accuracy and reducing computation time. Color K-Means method which is image segmentation based on color estimates correlation of objects in an image. And it extracts region of interest for applying Loopy Belief Propagation(LBP). For this, disparity map can be compensated by considering correlation of objects in the image. And it can reduce computation time because of calculating region of interest not all pixels. As a result, disparity map has more accurate and the proposed method reduces computation time.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.36 no.10
• /
• pp.1229-1234
• /
• 2007

Antioxidant activities of extracts from anglerfish (Lophiiu Zitulon) were evaluated. Each part of fresh (skin, flesh, stomach, and liver) or dried (skin and flesh) anglerfish was extracted by four different solvents (methanol, ethanol, acetone, and distilled water). Antioxidant activities of the extracts were determined by radical scavenging activity (RSA) and reducing power (RP). Relatively higher RSA and RP were found in methanol and water extract of fresh anglerfish liver. Antigenotoxic effect of the extracts, which was measured by Comet assay, was shown in most of the extracts except methanol, acetone and distilled water extracts of fresh stomach sample. These results indicated that antioxidant and antigenotoxic properties of extracts from angler fish were variable depending on parts, solvent, and/or physicochemical state. The appropriate extraction process could provide some valuable bioactive materials from anglerfish.

• Maxillofacial Plastic and Reconstructive Surgery
• /
• v.19 no.3
• /
• pp.265-286
• /
• 1997

Bone morphogenetic proteins(BMPs) are a group of transforming growth factor beta(TGF-${\beta}$)-related factors and multifunctional proteins, especially the only known biologic factors capable of inducing endochondral bone formation at an extraskeletal site. This study was performed to investigate the effect of the partially purified porcine BMP(pBMP) at an ectopic site. PBMP was partially purified from porcine bone matrix and its activity was monitored by an in vivo bioassay. The purification method utilized extraction of the bone-inducing activity with 4M guanidine, followed by chromatography on heparin-Sepharose. Active fractions were assayed by sodium dodecyl sulfate-polyacrylamide gel electrophoresis. And the fractions were reconstituted with inactive insoluble collagenous bone matrix from rats, acid soluble type I collagen from rat tail and chondroitin-6-sulfate sodium salt and implanted into the pectroralis muscle pouches of Sprague-Dawley rats. And the carrier complex was implanted on the opposite side as control. The rats were sacrificed at the day of 1st, 3rd, 5th, 7th, 11th, 14th and 21st after implantation and examined histologically, radiologically and biochemically. And alkaline phosphatase activity and calcium content were used as indices of bone formation. The results were as follows ; 1. Active fractions were localized in a zone between 31 and 40 KDa on SDS-PAGE. 2. The implanted 3.0mg of the partially purified pBMP induced cartilage and bone in the muscle tissue of rats through an endochondral ossification process. 3. Inactive insoluble bone matrix, type I collagen and chondroitin-6-sulfate have functioned as carriers for pBMP, but revealed some foreign body reactions. 4. Soft X-ray didn't reveal significant change between the experimental and the control group. 5. The alkaline phosphatase activities in the experimental group of 5th, 7th, 11th, 14th and 21st were increased significantly compared with control (p<0.01) with the peak in the group of 11th day. 6. With time, the calcium content of the experimental group increased. And the calcium contents in the experimental group of 11th, 14th and 21st were increased significantly compared with control (p<0.01).

• Tuberculosis and Respiratory Diseases
• /
• v.40 no.4
• /
• pp.442-448
• /
• 1993

Foreign body aspiration, although not an uncommon problem in children, is unusual in adults and is overlooked as a cause of airway obstruction. Small foreign bodies that lodge in the peripheral airway are often asymptomatic initially and can result in respiratory symptoms several years later. Especially in the cases of otherwise healthy subjects, even though manifested overt respiratory symptoms, diagnosis can be delayed due to lack of history of aspiration or unnoticed aspiration. A 57-year-old male was admitted to Yonsei University College of Medicine Severance hospital due to left upper chest pain for five months. on the past history he had been diagnosed as bronchiectasis about 20 years ago. He showed radiologically bead-like bronchostenosis and a calcific density protruding into the lumen of left upper lobar bronchus. Bronchoscopically broncholith was revealed with the finding of endobronchial obstruction of each upper and lingular division of left upper lobar bronchus due to mucoid impaction and surrounding inflammed bronchial mucosa. The preoperative diagnosis was broncholithiasis due to chronic inflammatory process. Lung perfusion scan shows absence of perfusion in left upper lobe. So left upper lobectomy was performed. But from the pathologic specimen an incisor tooth was emerged. Later a history of tooth extraction thirty years ago at dental clinic was found. We report a case of bronchial obstruction due to occult aspiration of a tooth with a review of the literatures.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2008.06a
• /
• pp.169-169
• /
• 2008

To keep pace with scaling trends of CMOS technologies, high-k metal oxides are to be introduced. Due to their high permittivity, high-k materials can achieve the required capacitance with stacks of higher physical thickness to reduce the leakage current through the scaled gate oxide, which make it become much more promising materials to instead of $SiO_2$. As further studying on high-k, an understanding of the relation between the etch characteristics of high-k dielectric materials and plasma properties is required for the low damaged removal process to match standard processing procedure. There are some reports on the dry etching of different high-k materials in ICP and ECR plasma with various plasma parameters, such as different gas combinations ($Cl_2$, $Cl_2/BCl_3$, $Cl_2$/Ar, $SF_6$/Ar, and $CH_4/H_2$/Ar etc). Understanding of the complex behavior of particles at surfaces requires detailed knowledge of both macroscopic and microscopic processes that take place; also certain processes depend critically on temperature and gas pressure. The choice of $BCl_3$ as the chemically active gas results from the fact that it is widely used for the etching o the materials covered by the native oxides due to the effective extraction of oxygen in the form of $BCl_xO_y$ compounds. In this study, the surface reactions and the etch rate of $Al_2O_3$ films in $BCl_3/Cl_2$/Ar plasma were investigated in an inductively coupled plasma(ICP) reactor in terms of the gas mixing ratio, RF power, DC bias and chamber pressure. The variations of relative volume densities for the particles were measured with optical emission spectroscopy (OES). The surface imagination was measured by AFM and SEM. The chemical states of film was investigated using X-ray photoelectron spectroscopy (XPS), which confirmed the existence of nonvolatile etch byproducts.

• Resources Recycling
• /
• v.12 no.1
• /
• pp.33-40
• /
• 2003

Mn was extracted by using a nitric acid from the reduced ferromanganese dust and the basic experiments were taken to refine the manganese nitrate solution by means of precipitation of Ca, Mg oxalate. The dust was generated in AOD process producing a medium-low carbon ferromanganese and collected in the bag filter. Manganese oxide content in the dust was about 90% and its phase was confirmed as $Mn_3$$O_4$. $Mn_3$$O_4$ in the dust was reduced to MnO by roasting with activated charcoal. The main impurities in the extracted solution prepared by leaching the reduced dust with nitric acid were Na, K, Fe, Si, Ca, Mg etc. Among them, Fe was removed by controlling pH of the solution more than 4 and precipitating $Fe(OH)_3$, simultaneously silicious material solved in the solution was removed by co-precipitation with the ferric hydroxide. Addition of 150 g reduced dust into 4N HNO3 solution 1$\ell$ was appropriate to control the pH of the solution to pH 4. To differ greatly the solubilities of manganese oxalate and calcium or magnesium oxalate in a solution containing a high concentration of Mn, pH of 4 or less and addition of ($NH_4$)$_2$$C_2$$O_4$ in equivalent with Ca and Mg are recommended. At this time, the higher temperature was the shorter the precipitation reaction time was needed.

• Resources Recycling
• /
• v.12 no.1
• /
• pp.55-64
• /
• 2003

Presently, the reuse of waste FCC catalysts, which generated from the refining process of crack oil, after the removal of con-taminated metallic impurities have not been attempted domestically yet because the separation technology f3r the impurities from waste catalysts has not been established. As a basic study far the reusable portion from the waste FCC catalysts and treatment of metallic impurities are assured, there will be invoked an significant contribution not only in the recycling of abandoned wastes up to date but also in the treatment efficiency of wastes and extraction of economical benefits from them. The magnetic separation of impurities such as Fe, Ni, and V, from waste FCC catalyst has been attempted with or without its pre-oxidation at high temperature for the purpose of its reuse. The results showed that the separability of impurities by magnetic force was high far non-preoxidized catalysts compared with preoxidized ones, and employment of screen-type matrix showed a higher separation efficiency than ball-type matrix. The separability increased with the strength of magnetic field, and the method of ball matrix has separation efficiency of maximum 51.10%. The amount of metallic impurities was in the decreasing order of V, Ni, and Fe depending upon ICP analysis.

• Korean Journal of Environment and Ecology
• /
• v.20 no.4
• /
• pp.365-373
• /
• 2006

With a few exceptions, Korean lakes are artificially constructed for multi-purposes throughout the country. In the majority of cases, a lake is in a multiple series of reservoirs along a river or is an estuary Moreover, nutrient supplying activities (including sand extraction) and biomanipulation(esp., overfishing and fish introduction) are omnipresent in most cases. Furthermore, there is an Asian monsoon every year. In brief, europhication and algal blooms break out as a result of complicated causes. However limnological monitoring and scientific working programs are in the course of beginning. The question is what kind of strategy is desirable to establish a solid limnological database for the efficiency of the restoration process in each Korean reservoir We present light monitoring cases on the basis of algal and some physicochemical data in 2005. Do they give some useful informations despite their simplicity. Based on physicochemical factors and phytoplankton data using Utermohl method and Canonical Correspondence Analysis(CCA) were performed for Lake Cheongpyeong, Lake ASan, Lake Namyang, and Lake SapGyo. The results of CCA showed that Lake Cheongpyeong was different from the other three Lakes at estuary. Also each Lake at estuary was slightly different from one other. This result would encourage to initiate building an adequate Korean reservoir-ecosystem understanding and models for better ecological management despite the limited data. However, the results also indicate to sustain collecting ecological data and building database to interpret the Korean ecological reservoir model.

• Journal of Sasang Constitutional Medicine
• /
• v.25 no.2
• /
• pp.108-114
• /
• 2013

Objectives This study was aimed to review a standardized method of retention enema by extracting elements associated with methods of retention enema from papers involved. Methods 1) Data sources : Retrieval was made, using 'Enema' or 'Retention Enema' as search words in MEDLINE, The Cochrane Library, KISS, RISS, and NDSL DB. 2) Study selection : Two authors excluded irrelevant papers and chose qualified abstracts in the rest of the papers. The chosen studies were reviewed fully by the authors so that they could screen the significant papers based on the exclusion criteria. 3) Data extraction : Data on the total number of subjects, the target disease, the type, quality, length, diameter of catheter, the insertion length of catheter, the sample, the sample volume, the process of retention enema and the number of performing retention enema were extracted from the selected studies. Results & Conclusions The retention enema can be applied to gastrointestinal diseases, genitourinary diseases, metabolic diseases such as hypertension and diabetes, headaches and neurological disorders. The standardized treatment method is as following: 1) inserting a rental tube of 18-28 Fr that measures 20 to 30 cm into the patient's anus, 2) injecting herbal medicines which have purgative action or benefit on stomach and intestinal tract at the rate of 4 ml/min, and 3) holding them for 10 to 15 minutes.