• Journal of Korean Neurosurgical Society
• /
• v.59 no.3
• /
• pp.302-305
• /
• 2016

Gliofibroma is an extremely rare biphasic tumor with an astrocytic and benign mesenchymal component, which commonly occurs within the first two decades of life. The exact biological behavior of the tumor is not fully understood. Therefore, it is not listed as a distinct entity in the current World Health Organization classification of central nervous system tumors. Here, we describe a rare case of gliofibroma, which was located on the medial temporal lobe in a 61-year-old woman. Preoperatively, we misdiagnosed it as a meningioma because it was a well-demarcated and well-enhanced extra-axial mass with calcification and bony destruction. On the histopathological and immunohistochemical examination, the tumor consisted of a mixture of glial tissue and mesenchymal tissue and it was finally diagnosed as a gliofibroma. To our knowledge, this case of intracranial gliofibroma is in the oldest patient ever reported.

• Proceedings of the KIEE Conference
• /
• 2005.07d
• /
• pp.3019-3021
• /
• 2005

In this paper we suggest a novel temperature detection method utilized in direct over-temperature protection circuit modeling. The suggested model detects temperature variation using Rds(on) characteristics of MOSFET, while the conventional methods are using extra devices such as a temperature sensor or an over-temperature detection transistor. The temperature-dependant MOSFET model is implemented using Spice ABM(Spice Analog Behavior Model). The direct over-temperature protection circuit was designed including it. We verified effectiveness of the temperature dependant Rds(on) model characteristics and performance of the direct over-temperature protection circuit on PSpice simulation

• Proceedings of the Korea Concrete Institute Conference
• /
• 2003.11a
• /
• pp.207-210
• /
• 2003

As reviewing of current trend on PC connection details, owing to effective stress transfer in the connection, it grow to increase that use of mechanical splices, reinforcements or welded splices, and prestressing. However such devices as reinforcement, mechanical splices entail not only more cost resulted from materials but also extra construction process so as to cause PC used method to lower competition against conventional method. Therefore more enhanced connection details which help working process simplified and construction cost reduced. In this research, as replace 9.3mm 7strand for reinforcement, it is attempt to devise connection detail which makes workability improve and confirm effective stress transfer in the region of connection. The experimental research is proceeded by partial tension test of specimen. The splice lengths of 7strand is decided to be variations. The flexural capability is verified to depend on spice length. An an appropriate splice length could be also determined as a precedent research on improving PC connection detail.

• Fibers and Polymers
• /
• v.2 no.2
• /
• pp.51-57
• /
• 2001

Tissue engineering is one exciting approach to treat patients who need a new organ or tissue. A critical element in this approach is the polymer scaffold, as it provides a space for new tissue formation and mimics many roles of natural extra-cellular matrices. In this review, we describe several design parameters of polymer matrices that can significantly affect cellular behavior, as well as various polymers which are frequently used to date or potentially useful in many tissue engineering applications. Interactions between cells and polymer scaffolds, including specific receptor-ligand interactions, physical and degradation feature of the scaffolds, and delivery of soluble factors, should be considered in the design and tailoring of appropriate polymer matrices to be used in tissue engineering applications, as these interactions control the function and structure of engineered tissues.

• Journal of the Korean Society for Heat Treatment
• /
• v.9 no.2
• /
• pp.91-102
• /
• 1996

Microstructural control to produce multiphase structure has received much attention to improve the high temperature strength as well as low temperature ductility of intermetallics. Transmission electron microscopic investigation has been carried out concerning the effect of Cr-precipitation on the mechanical properties of B2-ordered NiAl containing 4 to 8 mol% of Cr. By aging at temperatures around 973 K after solution annealing, fine spherical precipitates took place homogeneously in the NiAl matrix and the alloys hardened appreciably. Selected area electron diffraction (SAED) patterns have not revealed any additional extra-spots during aging, because the Cr-particles show cube-cube orientation relationship and keep a perfect coherency with the ordered matrix lattice. Dislocations were confirmed to bypass the particles during deformation. Although the dispersion of Cr-particles increased the yield strength of NiAl at intermediate temperature, the strength decreased appreciably at higher temperatures.

• Proceedings of the Korean Society of Machine Tool Engineers Conference
• /
• 2000.04a
• /
• pp.102-108
• /
• 2000

Due to the rapid increase of long-distance transportation, particular attentions have been paid to truck tires, especially to their dynamic characteristics. In this research, experimental modal analysis on two kinds of light-truck tires, i.e., radial tire and bias tire, are performed by using GRFP(global rational fraction polynomial) method to investigate differences of the dynamic behavior of the two tires. The test results have shown that the modal frequencies of bias tire are much higher than their corresponding values of radial tire with a similar mode shape, which is in accordance with the fact that the radial rigidity of bias tire is higher than that of radial tire. And most of the modal decay rates of bias tire are larger than those of radial tire within the scope of this experiment. In the frequency domain range of test, the bias tire has extra modes, which do not occur in the radial tire. This difference is based on the fact that the circumferential rigidity of the bias tire is quite low whereas that of radial tire is so high that the frequencies of the corresponding modes are out of the frequency range of test.

• Transactions of the Korean Society of Automotive Engineers
• /
• v.1 no.3
• /
• pp.95-108
• /
• 1993

The needs for smooth curves and surfaces are increasing in modeling cars, ships, airplanes, and other consumer products either for aesthetic or functional purpose. However, the curves and surfaces generated by conventional modeling methods usually exhibit an unwanted behavior due to digitizing errors or inadequate generation method, and thus much time and extra effort is spent afterwards to get the faired results. The objective of this work is to develop a fairing scheme by which well refined shape of a surface can be acquired with detecting and removing the shape imperfections of the given surface represented by NURBS. The fairing scheme is based on an optimization process in which the control points of the given surface are repositioned to minimize the integration of the jumps(perturbations) of the unit normal vectors at all surface points.

• Proceedings of the Korea Water Resources Association Conference
• /
• 2007.05a
• /
• pp.1387-1391
• /
• 2007

In this study, water quality prediction that is necessary to water quality forecasting system is performed using 2-D river analysis models RMA-2 and RAM4. RAM4 is suitable to water quality forecasting system cause it is possible to put in the pollutants as a mass type boundary condition. Instant injections of pollutants at Yongdamdaegyo Bridge in Namhangang River are simulated and the behavior of pollutant cloud is observed. The effects of water quality accident to Paldang 2 water intake plants in Paldangho Lake is analyzed with time variation. And extra flow simulation is performed for mitigation of pollution. Several cases of water quality forecasting system at home and abroad are investigated and the direction of water quality forecasting system is presented.

• ETRI Journal
• /
• v.28 no.5
• /
• pp.692-695
• /
• 2006

Recently, there has been a constant barrage of worms over the Internet. Besides threatening network security, these worms create an enormous economic burden in terms of loss of productivity not only for the victim hosts, but also for other hosts, as these worms create unnecessary network traffic. Further, measures taken to filter these worms at the router level incur additional network delays because of the extra burden placed on the routers. To develop appropriate tools for thwarting the quick spread of worms, researchers are trying to understand the behavior of worm propagation with the aid of epidemiological models. In this study, we present an optimization model that takes into account infection and treatment costs. Using this model we can determine the level of treatment to be applied for a given rate of infection spread.

• Bulletin of the Korean Chemical Society
• /
• v.21 no.7
• /
• pp.705-708
• /
• 2000

Adsorption of CO and NO Moleculcs on a Pt(OO1)-hex R0.7° surface at 90 K is investigated by scanning tunneling microscopy (STM) in ultra-high vacuum environments. At an initial stage of adsorption, both molecules are preferentially adsorbed on th e Iess coordinated Pt atoms of the surface with hexagonal structure, which act as active sites. Domains of the adsorbates grow parallel to the stripe structure of the reconstructed surface because of Iower migration energy in this direction. The extra Pt atoms produced from adsorbate-induced restructuring give rise to anisotropic islands on the ( 1 x 1 ) surface. Each of the adsorbed NO molecules at low coveragcs is atomicalIy resolved during STM observation. However, the spots of the adsorbed CO are invisible.Such a behavior is probably explained in terms of different interactions between the adsorbates.