• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.12 no.1
• /
• pp.375-383
• /
• 2011

Recent advances in digital technology and diversified internet services have resulted in a rapid growth of research on monitering systems using embedded web servers in USN systems. In designing USN systems equipped with wireless sensor modules requiring extra power for heating sensors for their appropriate operations, excessive power consumption introduces inefficiency to the entire system. In this paper, using embedded systems in web environment, we develop a remote-monitoring system with VOC (Volatile Organic Compounds) sensor signal, and propose a real time method of processing sensor-data streams by way of the serial bus from the sensor module in the USN system. The proposed system has an advantage of monitering the harmful gases on real-time basis and can be used semi-permanently by providing the sensor module with power through the serial bus. The harmful gas to be detected by the VOC sensor module is Toluene and the sensor module is composed of TGS-2602 VOC(Volatile Organic Compounds) sensors of FIGARO. The detected signal is transferred to the embedded web server using the RS-485 serial communication device. The proposed remote VOC monitering system is designed to coordinate in such a way that the VOC sensor module and embedded web server (EMPOS-II) work together effectively for real time monitering of harmful gases on the web at any places where the internet is connected.

• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.3
• /
• pp.97-107
• /
• 2017

In the field of automatic door, the infrared rays and microwave sensor are much used as the important components in charge of the motor's operation control of open and close through the incoming signal of object recognition. In case of existing system that the sensor of the infrared rays and microwave are applied to the automatic door, there are many malfunctions by the infrared rays and visible rays of the sun. Because the automatic doors are usually installed outside of building in state of exposure. The environmental change by temperature difference occurs the noise of object recognition detection signal. With this problem, the hardware fault that the detection sensor is unable to follow the object moving rapidly within detection area makes the sensing blind spot. This fault should be improved as soon as possible. Because It influences safety of passengers who use the automatic doors. This paper conducted an experiment to improve the detection area by installing extra ultrasonic sensor besides existing detection sensor. So, this paper realize the computing circuit and detection algorithm which can correctly and rapidly process the access route of objects moving fast and the location area of fixed obstacles by applying detection and advantages of ultrasonic signal to the automatic doors. With this, It is proved that the automatic door applying ultrasonic sensor is improved detection area of blind spot sensing through field test and improvement plan is proposed.

• Journal of KIISE:Information Networking
• /
• v.33 no.3
• /
• pp.193-200
• /
• 2006

The security feature is essential in wireless sensor network such as intrusion detection or obstacle observation. Sensor nodes must have shared secret between nodes to support security such as privacy. Many methods which provide key pre-distribution need too many keys or support poor security. To solve this problem, probabilistic key pre-distribution is proposed. This method needs a few keys and use probabilistic method to share keys. However, this method does not guarantee key sharing between nodes, and neighbor nodes nay not communicate each other. It leads to waste of network resource such as inefficient routing, extra routing protocol. In this paper, we propose new key distribution method using quorum system which needs a few keys and guarantee key sharing between nodes. We also propose extension of the method which needs fewer keys and guarantee key sharing when node deployment knowledge is well known.

• The Journal of the Institute of Internet, Broadcasting and Communication
• /
• v.13 no.1
• /
• pp.115-120
• /
• 2013

There are lots of vulnerability and chance to be attacked in wireless sensor networks, which has many applications. Among those attacks, sybil attack is to generate a lot of false node and to inject false information into networks. When a user uses such false information without recognizing the attack, there might be a disaster. Although authentication method can be used to protect such attack, the method is not a good choice in wireless sensor networks, where sensor nodes have a limited battery and low power. In this paper, we propose a novel method to detect sybil attack with a little extra overhead. The proposed method use the characteristics that there is a weak connection between a group of normal nodes and a group of false nodes. In addition, the method uses energy aware routing based on random routing and adds a little information into the routing. Experimental results show that the proposed method detects false node by more than 90% probability with a little energy overhead.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• v.11 no.10
• /
• pp.5149-5167
• /
• 2017

Reducing energy consumption in a wireless video sensor network (WVSN) is a crucial problem because of the high video data volume and severe energy constraints of battery-powered WVSN nodes. In this paper, we present an adaptive dynamic resizing approach for a SRAM communication buffer in a WVSN node in order to reduce the energy consumption and thereby, to maximize the lifetime of the WVSN nodes. To reduce the power consumption of the communication part, which is typically the most energy-consuming component in the WVSN nodes, the radio needs to remain turned off during the data buffer-filling period as well as idle period. As the radio ON/OFF transition incurs extra energy consumption, we need to reduce the ON/OFF transition frequency, which requires a large-sized buffer. However, a large-sized SRAM buffer results in more energy consumption because SRAM power consumption is proportional to the memory size. We can dynamically adjust any active buffer memory size by utilizing a power-gating technique to reflect the optimal control on the buffer size. This paper aims at finding the optimal buffer size, based on the trade-off between the respective energy consumption ratios of the communication buffer and the radio part, respectively. We derive a formula showing the relationship between control variables, including active buffer size and total energy consumption, to mathematically determine the optimal buffer size for any given conditions to minimize total energy consumption. Simulation results show that the overall energy reduction, using our approach, is up to 40.48% (26.96% on average) compared to the conventional wireless communication scheme. In addition, the lifetime of the WVSN node has been extended by 22.17% on average, compared to the existing approaches.

• KIPS Transactions on Computer and Communication Systems
• /
• v.9 no.4
• /
• pp.83-88
• /
• 2020

In Solar-powered wireless sensor networks(SP-WSN), the battery is periodically charged, so the best use of harvested energy is more important, rather than minimizing energy consumption. Meanwhile, as is well known, the reliability of communication between sensor nodes is very limited due to the resource-constraint of sensor nodes. In this paper, we propose an advanced FEC (forward error correction) scheme which can give SP-WSN more reliability for communication. Firstly, the proposed scheme uses energy modeling to calculate the amount of surplus energy which can be utilized for extra operations, and then determines the number of additional parity bits according to this amount of surplus energy. At the same time, link quality modeling calculates the optimal parity bits for error recovery in the current data communication environment. Finally, by considering these two parity sizes, it is possible to determine the optimal parity size that can maximize the data reliability without affecting the node black out. Performance verification was performed by comparing the amount of data collected at the sink and the number of outage nodes with other schemes.

• KIPS Transactions on Computer and Communication Systems
• /
• v.4 no.12
• /
• pp.409-414
• /
• 2015

The energy conservation is the most important subject for long run operation of the sensor nodes with limited power resources. Clustering is one of most energy efficient technique to grouped the sensor nodes into distinct cluster. But, in a cluster based WSN, CHs and gateways bear an extra work load to send the processed data to the sink. The inappropriate cluster formation may cause gateways overloaded and may increase latency in communication. In this paper, we propose a novel load balanced clustering model for improving energy efficiency and giving a guarantee of long network lifetime. We show the result of performance measurement experiments that designs using a branch and bound algorithm and a multi-start local search algorithm to compare with the existing load balanced clustering model.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.19 no.4
• /
• pp.41-49
• /
• 2009

In ubiquitous sensor networks, sensor nodes can be compromised by an adversary since they are deployed in hostile environments. False sensing reports can be injected into the network through these compromised nodes, which may cause not only false alarms but also the depletion of limited energy resource in the network. In the security solutions for the filtering of false reports, the choice of a security threshold value which determines the security level is important. In the existing adaptive solutions, a newly determined threshold value is broadcasted to the whole nodes, so that extra energy resource may be consumed unnecessarily. In this paper, we propose an application of the recursive contract net protocol to determine the threshold value which can provide both energy efficiency and sufficient security level. To manage the network more efficiently, the network is hierarchically grouped, and the contract net protocol is applied to each group. Through the protocol, the threshold value determined by the base station using a fuzzy logic is applied only where the security attack occurs on.

• Journal of the Korea Society for Simulation
• /
• v.18 no.3
• /
• pp.83-90
• /
• 2009

Since wireless sensor networks are deployed in open environments, an attacker can physically capture some sensor nodes. Using information of compromised nodes, an attacker can launch false data injection attacks that report nonexistent events. False data can cause false alarms and draining the limited energy resources of the forwarding nodes. In order to detect and discard such false data during the forwarding process, various security solutions have been proposed. But since they are prevention-based solutions that involve additional operations, they would be energy-inefficient if the corresponding attacks are not launched. In this paper, we propose a detection method that can detect false data injection attacks without extra overheads. The proposed method is designed based on the signature of false data injection attacks that has been derived through simulation. The proposed method detects the attacks based on the number of reporting nodes, the correctness of the reports, and the variation in the number of the nodes for each event. We show the proposed method can detect a large portion of attacks through simulation.

• Journal of the Institute of Electronics Engineers of Korea CI
• /
• v.37 no.3
• /
• pp.39-44
• /
• 2000

In this Paper, we present a new 3D viewing device based on field-sequential stereoscopic system. To extract signals for synchronization, common field-sequential stereoscopic system should insert extra equipment in the system(usually PC), or use internal signal of the system with software drivers. It causes several problems such as inconvenience, compatibility with hardware or OS, and reversed view of left and right image. In this paper, we propose new system that uses photo sensor sensing the light stimulus on the screen to extract synchronization and R/L distinction signals. This system will solve these problems and moreover it can operate in the internet or HDTV.