• 한국가스학회지
• /
• 제24권5호
• /
• pp.10-19
• /
• 2020

석유화학 플랜트 및 가스 시설물의 밸브 사고는 심각한 인적·물적 피해를 유발하며 이러한 시설에서의 주요사고 원인은 밸브에서의 가스 누출로 인한 흡입, 중독, 화재 및 폭발사고이다. 가스 누출을 예방하기 위한 점검은 인력에 의해 직접 검사가 이루어지는 경우가 많으며, 점검자는 가스 누출사고의 위험에 직접적으로 노출된다. 이러한 사고를 예방하기 위하여 IoT 기반 위험 분석 및 위험성 평가 모니터링 시스템과 자동제어 시스템을 적용하였다. 이를 통하여 산업용 밸브의 내·외부 가스 누출을 검지하고 하이브리드 센서를 통한 국부 및 전역 센싱으로 플랜트 현장에서의 밸브 이상으로 인한 사고를 실시간으로 모니터링 할 수 있다. 이와 같이 새로운 산업용 밸브 안전관리 시스템이 개발됨에 따라 관련 구성장치에 대한 성능 및 현장부합성에 대한 평가방안이 요구되었다. 본 연구에서는 산업용 유무선 통신을 지원하고 가스센서와 광섬유센서를 포함하는 방폭형 하이브리드 센싱 시스템과 자동제어가 가능한 액추에이터 패키지의 성능을 평가하기 위한 시험 항목 및 방법을 제시하였고 시스템의 신뢰성을 확보할 수 있는 구성장치의 성능검증 방안을 개발하였다.

• 에너지공학
• /
• 제22권4호
• /
• pp.394-398
• /
• 2013

최근들어 자동차에어콘 콤프레셔의 전기마그네트식 콘트롤밸브는 내부형 스워시 프레이트형을 사용하고 있다. 이 시스템은 외부로부터 공급되는 전류량(신호)에 의하여 작동되며 동시에 스워시판 작동에 의한 압력은 냉매가 흐르는 비율에 의하여 결정된다. 본 논문에서는 압축기의 크랭크케이스 압력이 전기마그네트 콘트롤 밸브 전기 흐름량에 따른 유량의 값을 측정하여 엔진의 효율을 향상시키고자 한다.

• 드라이브 ㆍ 컨트롤
• /
• 제17권1호
• /
• pp.51-60
• /
• 2020

This study addresses the modeling of a bi-directional outlet variable swash plate type axial piston pump with two EPPR valves and an analysis of the response characteristics to the angle control of that pump. In this paper, the combination of the EPPR valve and double rod type piston is referred to as the EPPR regulator. The EPPR regulator is compact and inexpensive, and has good responsiveness. Under actual pump operating conditions, because of the various external conditions of the pump, inertia is applied to the swash plate, generating the tilting torque. Also, the tilting torque can delay or shorten the response characteristics of the regulator. So we validated them through the analysis using SimulationX and these results allow users to freely integrate the EPPR regulator into the desired system.

• 한국수소및신에너지학회논문집
• /
• 제19권6호
• /
• pp.474-481
• /
• 2008

수소 기관에서 역화없이 고성능과 저$NO_x$를 실현시키기 위하여 밸브 타이밍 변화에 따른 흡기관 분사식 수소 기관의 성능을 파악하고 가솔린의 경우와 비교하였다. 그 결과 흡기밸브 타이밍은 역화억제와 성능향상에 큰 영향을 미치는 것을 확인하였다. 흡기밸브타이밍의 진각은 역화를 억제하며 효율과 출력을 동시에 향상된다. 비록 흡기밸브 타이밍 변화에 의해 NOx는 증가하지만, 희박영역인 출 ${\Phi}=0.5$에서 현저히 감소된다. 또한 열효율은 ${\Phi}=0.5$ 토크는 ${\Phi}=1.0$에서 가장 높게 나타난다. 흡기밸브 타이밍을 $ATDC20^{\circ}$에서 TDC로 변화시켰을 때, ${\Phi}=1.0$에서 토크는 약 28% 증가되고, ${\Phi}=0.5$에서 효율은 약 7%향상된다.

• 대한본초학회지
• /
• 제33권4호
• /
• pp.43-51
• /
• 2018

Objectives : Pharbitidis Semen, the seeds of Ipomoea nil (L.) Roth or I. purpurea (L.) Roth, is well-known traditional herbal medicine in Korea. But it is often marketed as a different seed or mixtures of its closely related species. Thus, the present study aims to provide external and micromorphological characters and identification key by using stereoscope (ST) and scanning electron microscope (SEM) for discriminating authentic of Pharbitidis Semen. Methods : A discrimination on external morphological characteristics of sepals, fruits, seeds, and hilum, testa cell micromorphology in the original plants and its congeneric species was carried out using digital calipers, ST, and SEM. Results : Number of valves (degree of apex of each valve), number of seeds per locule, hairy in capsules and size, luster, density of hairy, hilum shape in seeds and shape of cell, anticlinal, periclinal wall in testa may have high discriminative value. The seeds of Ipomoea nil as an original plant of Pharbitidis Semen were distinguished from other species by the relative larger in size, ovoid-trigonous in shape, mostly flabellate or triangular to trapezoid in outline (c.s.), dull, and puberulent in surface and thicken anticlinal wall. Conclusions : On the basis of the results, an identification key of Pharbitidis Semen and closely related species is provided. Our observations suggest that the combination of morphological characters and other studied results could be helpful in the successfully identified authentic herbal medicines. Moreover, micromorphological characters using SEM could be useful for discriminating authentic medicines.

• 한국기계가공학회지
• /
• 제10권6호
• /
• pp.50-55
• /
• 2011

The fluid power products are widely used in current industrial area such as automation of products and equipment assembly, high-tech machine tool, aircraft, train, and etc. As the development of industry is in progress, the development of the fluid power products is demanding and it is required in every industrial area. This research proposed a pneumatic system to evaluate displacement accuracy of the pneumatic actuator without external load and to analyze capability of integration of the valve system. The pneumatic system consisted of a combination of pneumatic actuator, four two-port valves, two three-port valves, two pressure valve, a check valve, two proximity sensors, and a program logic controller (PLC). The position controller is based on the PLC connected with the proximity sensors. The maximum air pressure applied for tests was $49.05N/cm^2$ and the displacement accuracy of a stroke was measured using a dial gauge. The supply- and discharge-side of air pressure and the length of the stroke of the pneumatic cylinder were varied The test of the position control of the pneumatic cylinder was carried out 50 times at each supply- and discharge-side air pressure of 24.53/34.34, 29.43/39.24, 34.34/44.15, and $39.24/49.05N/cm^2$ and replicated three times. The accuracy of the displacement of the pneumatic cylinder stroke increased as the supply- and discharge-side of air pressure increased with the stroke length of 133mm. Also the displacement accuracy increased as the stroke length increased with the fixed supply- and discharge-side of air pressure of the pneumatic cylinder as 34.34 and $44.15N/cm^2$, respectively. The most accurate displacement of the pneumatic cylinder was obtained at the supplyand discharge-side of air pressure of 39.24 and $49.05N/cm^2$, respectively, and strokes of 170 and 190mm.

• Journal of Chest Surgery
• /
• 제13권4호
• /
• pp.442-447
• /
• 1980

A 8-year-old boy underwent surgical correction of complete transposition S.D.D. of great arteries combined with subaortic ventricular septal defect and pulmonary stenosis [infundibular and valvular]. The operation consisted of an internal baffling connecting the left ventricle to the aorta through the ventricular septal defect. The pulmonary stenosis was corrected with the method of external connection, the right ventricle to the pulmonary artery using the conduit valve [20 mm] contained Hancock due to abnormal distribution of left coronary artery of which conduit due to abnormal distribution of left coronary artery of which the circumflex branch crossed the portion of right ventricular outflow tract. This case was suitable for corrective surgery-Rastelli operation-and the patient`s condition in very good until present [post-operative 5 months].

• 대한기계학회논문집A
• /
• 제33권6호
• /
• pp.573-576
• /
• 2009

We present a passive flow-rate regulator, capable to compensate inlet pressure variation and to maintain a constant flow-rate for precise liquid control. Deflection of the parallel membrane valves in the passive flowrate regulator adjusts fluidic resistance according to inlet fluid pressure without any external energy. Compared to previous passive flow-rate regulators, the present device achieves precision flow regulation functions at the lower threshold compensation pressure of 20kPa with the simpler structure. In the experimental study, the fabricated device achieves the constant flow-rate of $6.09{\pm}0.32{\mu}l/s$ over the inlet pressure range of $20{\sim}50$ kPa. The present flow-rate regulator having simple structure and lower compensation pressure level demonstrates potentials for use in integrated micropump systems.

• 한국정밀공학회지
• /
• 제33권10호
• /
• pp.837-843
• /
• 2016

This paper presents a position control strategy for a pump-controlled electro-hydrostatic actuator (EHA) using feedforward control with disturbance compensation. As the disturbance observer is used to estimate nonlinear dynamics of EHA, which has valve-opening conditionals, as well as external disturbances, an additional feedforward control is adopted to achieve rapid response. The effectiveness of the proposed control strategy is verified through experiment using an EHA test bench. The proposed controller shows better tracking performance compared with a conventional PID controller.

• Nuclear Engineering and Technology
• /
• 제41권8호
• /
• pp.995-1004
• /
• 2009

The Advanced Power Reactor 1400 (APR1400) is an evolutionary advanced light water reactor (ALWR) based on the Optimized Power Reactor 1000 (OPR1000), which is in operation in Korea. The APR1400 incorporates a variety of engineering improvements and operational experience to enhance safety, economics, and reliability. The advanced design features and improvements of the APR1400 design include a pilot operated safety relief valve (POSRV), a four-train safety injection system with direct vessel injection (DVI), a fluidic device (FD) in the safety injection tank, an in-containment refueling water storage tank (IRWST), an external reactor vessel cooling system, and an integrated head assembly (IHA). Development of the APR1400 started in 1992 and continued for ten years. The APR1400 design received design certification from the Korean nuclear regulatory body in May of2002. Currently, two construction projects for the APR1400 are in progress in Korea.