• 한국전기전자재료학회논문지
• /
• 제24권3호
• /
• pp.208-214
• /
• 2011

In this thesis, the partial discharge according to applied voltage and variations of cross-sectional area and length of the conductor related to general condition for using cable was measured in order to study degradation diagnosis for 2-Core cable of the PVC insulator used in industrial fields for other safety installations. Also the thermal degradation conditions under various installation circumstances of cables were studied by assuming degradation conditions with each different degradation rate (50%, 67%, 100%) such as variation in degradated temperature, thermal exposure time, normal state, partially degradated state and overall degradated state for thermal degradation diagnosis. The quantity of electric discharge (V-Q) according to applied voltage was measured for measurement of inception voltage and extinction voltage. The quantity of electric discharge and the number of electric discharge (Q-N) were measured with applied voltage kept constantly. In addition, pictures were taken using SEM (scanning electron microscope) to compare the surface of external insulator to degradated state of internal insulator according to thermal degradation temperature and also compare the surface of external insulator to degradated surface state of internal insulator according exposure time of cables to thermal stress.

• 대한조선학회논문집
• /
• 제35권1호
• /
• pp.15-23
• /
• 1998

뭉툭한 스트럿에 의하여 생성되는 자유 표면의 난류 현상에 대한 기본 특성을 수치해석적 방법으로 연구하였다. 지배 방정식으로는 3차원 Navier-Stokes 방정식과 연속 방정식을 사용하였으며, 이들 지배 방정식은 유한 차분법으로 이산화 하였다. 물체앞 자유 표면에서의 난류 유동을 모사하기 위하여 임의의 작은 외부 교란을 도입하여 Large Eddy Simulation을 수행하였다. 물체앞 자유 표면은 어떠한 속도 이상에서 격렬하게 진동하는데 그 기본 특성은 물체 주위의 난류 흐름과 유사함을 수치 계산으로 보였다.

• 한국전문물리치료학회지
• /
• 제29권1호
• /
• pp.64-69
• /
• 2022

Background: Gluteus medius muscle is important for the stability of hip joint. The sufficient core stability can be contributed to the performance of gluteus medius muscle in standing position. In addition, the external support may affect core stability in standing position. Objects: The purpose of this study was to investigated the effectiveness of the external support on the strength and muscle activity of hip abductor muscle during hip abduction in standing position in subjects without core stability. Methods: Fifteen subjects participated in this study. The subjects were evaluated by using the double-leg lowering with bent knees to measure the core stability. The strength and muscle activity of hip abductors was measured in standing position with the condition with and without external support using the tensiometer sensor and the surface electromyography. The paired t-test was used to investigate the difference between hip abductor strength and activity according to external support. The level of statistical significance was set at α = 0.05. Results: The hip abductor strength and muscle activity of gluteus medius muscle with external support were significantly greater than those without external support during hip abduction in standing position (p < 0.05). Conclusion: During hip abduction in standing position, the external support may be contributed to the improvement of the hip abductor strength and muscle activity of gluteus medius especially in the subjects without core stability.

• 한국소음진동공학회:학술대회논문집
• /
• 한국소음진동공학회 2005년도 춘계학술대회논문집
• /
• pp.855-860
• /
• 2005

For the accurate measurement of acoustic properties of a surface, efforts have been made to reduce errors caused by external disturbance. If the reflection coefficient is considered as a transfer function between reflected wave and incident wave, causality is required between them and the reflection coefficient should be of minimum phase. In this thesis, the minimum phase condition is applied to measure correct reflection coefficient. The reflection coefficient is approximated as a rational function in the Z domain by minimizing the sum square error. Then the minimum phase reflection coefficient is reconstructed using the distribution of poles and zeros of the reflection coefficient model. The incident wave, the reflected wave and the impulse response function of causality are recalculated from the minimum phase reflection coefficient for further applications.

• 한국소음진동공학회논문집
• /
• 제15권10호
• /
• pp.1131-1136
• /
• 2005

For the accurate measurement of acoustic properties of a surface, efforts have been made to reduce errors caused by external disturbance. If the reflection coefficient is considered as a transfer function between reflected wane and incident wave, the causality is required between them and the reflection coefficient should be of minimum phase. In this thesis, the minimum phase condition is applied to measure correct reflection coefficient. The reflection coefficient is approximated as a rational function In the Z domain by minimizing the sum square error. Then the minimum phase reflection coefficient is reconstructed using the distribution of poles and zeros of the reflection coefficient model.

• Applied Science and Convergence Technology
• /
• 제26권4호
• /
• pp.91-94
• /
• 2017

AThe effect of localized surface plasmon on silicon substrates was studied using silver nanoparticles. The nanoparticles were formed by self-arrangement through the surface energy using rapid thermal annealing (RTA) technique after the thin nanolayer of silver was deposited by thermal evaporation. By the theoretical calculation based on Mie scattering and dielectric function of air, indium tin oxide (ITO), and silver, the strong peak of scattering cross section of silver nanoparticles was found at 358 nm for air, and 460 nm for ITO, respectively. Accordingly, the strong suppression of reflectance under the condition of induced light of $30^{\circ}$ occurred at the specific wavelength which is almost in accordance with peak of scattering cross section. When the external quantum efficiency was measured using silicon solar cells with silver nanoparticles, there was small enhancement peak near the 460 nm wavelength in which the light was resonated between silver nanoparticles and ITO.

• 반도체디스플레이기술학회지
• /
• 제17권3호
• /
• pp.85-89
• /
• 2018

Temperature uniformity of a wafer in a semiconductor process is a very important factor that determines the overall yield. Therefore, it is very important to confirm the temperature characteristics of the chuck surface on which the wafer is lifted. The temperature characteristics of the chuck depend on the external heat source, the shape of the cooling channel inside the chuck, the material on the chuck surface, and so on. In this study, CFD confirms the change of temperature characteristics according to the stacking order of ceramic materials and inner coolant path on the chuck surface. Finally this study suggests the best cooling condition of electrostatic chuck.

• 생물환경조절학회지
• /
• 제10권2호
• /
• pp.80-87
• /
• 2001

온실의 차광설계에 필요한 기초자료를 제시하기 위하여 온실모형과 실험온실을 이용하여 외부차광재의 적정 설치간격 분석, 차광재별 광투과율 분석, 차광율에 따른 온실내부온도의 변화 분석, 차광의 온실내부의 지온변화에 미치는 영향 분석 및 외부차광과 내부차광의 차광효과 비교를 실시하였다. 외부경사차광시 온실 지붕과 차광재의 설치간격은 10~30 cm에서 차광효율이 가장 좋은 것으로 나타났으나 환기창의 개폐를 위한 공간이 필요하지 않는 온실에서는 10cm 정도이면 충분한 간격이 될 것으로 판단된다. 경사차광의 온도차가 수평차광보다 높게 나타나 무환기 상태에서는 경사차광의 차광성능이 수평차광보다 더우수함을 알 수 있었다. 차광재 제작사에서 제시한 투과율과 실제 온실에서 계측한 투과율이 상당한 차이가 있으므로 차광재를 온실의 온도환경제어 목적으로 이용하고자 할 경우에는 차광재의 투과율을 미리 측정하여 검증할 필요가 있었다. 자연환기와 무환기 조건 모두에서 85% 차광온실이 55%차광온실 보다 최대 약 4$^{\circ}C$, 평균 약 2$^{\circ}C$ 정도의 승온억제효과가 더 있었다. 차광온실 내무의 지온변화는 차광율과 차광방법에 따른 차이는 매우 작았으나 무차광온실과는 큰 차이가 있었기 때문에 온실내부의 지온변화는 차광율과 차광방법 보다는 차광의 유무에 큰 영향을 받는다는 사실을 알 수 있었다. 50%인 차광재가 55% 차고아재보다 광투과율이 높음에도 불구하고 차광율 50%인 외부차광온실이 차광율 55%인 내부차광온실보다 승온억제효과가 더 우수한 것으로 분석되었다. 이러한 결과는 외부차광시 차광재가 흡수한 열이 온실내부로 전달되지 않을 뿐만 아니라 천장을 통한 환기효율이 내부차광보다 양호하기 때문인 것으로 판단되었다.

• 천문학회보
• /
• 제46권1호
• /
• pp.38.3-38.3
• /
• 2021

We are developing an optomechanical design of infrared telescope for the CubeSat and Unmanned Aerial Vehicle (UAV) which adapts the Linear Astigmatism Free- Three Mirror System in the confocal off-axis condition. The small entrance pupil (diameter of 40 mm) and the fast telescope (f-number of 1.9) can survey large areas. The telescope structure consists of three mirror modules and a sensor module, which are assembled on the base frame. The mirror structure has duplex layers to minimize a surface deformation and physical size of a mirror mount. All the optomechanical parts and three freeform mirrors are made from the same material, i.e., aluminum 6061-T6. The Coefficient of Thermal Expansion matching single material structure makes the imaging performance to be independent of the thermal expansion. We investigated structural characteristics against external loads through Finite Element Analysis. We confirmed the mirror surface distortion by the gravity and screw tightening, and the overall contraction/expansion following the external temperature environment change (from -30℃ to +30℃).

• 대한치과보철학회지
• /
• 제43권4호
• /
• pp.544-561
• /
• 2005

Purpose : This study was to assess the loading distributing characteristics of implant systems with internal connection or external connection under vertical and inclined loading using finite element analysis. Materials and methods : Two finite element models were designed according to type of internal connection or external connection The crown for mandibular first molar was made using cemented abutment. Each three-dimensional finite element model was created with the physical properties of the implant and surrounding bone This study simulated loads of 200N at the central fossa in a vertical direction (loading condition A), 200N at the centric cusp tip in a 15$^{\circ}$ inward inclined direction (loading condition B), or 200N at the centric cusp tip in a 30$^{\circ}$ outward inclined direction (loading condition C) respectively. Von Mises stresses were recorded and compared in the supporting bone, fixture, abutment and abutment screw. Results : 1. In comparison with the whole stress or the model 1 and model 2, the stress pattern was shown through th contact of the abutment and the implant fixture in the model 1, while the stress pattern was shown through the abutment screw mainly in the model 2. 2. Without regard to the loading condition, greater stress was taken at the cortical bone, and lower stress was taken at the cancellous bone. The stress taken at the cortical bone was greater at the model 1 than at the model 2, but the stress taken at the cortical bone was much less than the stress taken at the abutment, the implant fixture, and the abutment screw in case of both model 1 and model 2. 3. Without regard to the loading condition, the stress pattern of the abutment was greater at the model 1 than at the model 2. 4. In comparison with the stress distribution of model 1 and model 2, the maximum stress was taken at the abutment in the model 1. while the maximum stress was taken at the abutment screw in the model 2. 5. The magnitude of the maximum stress taken at the supporting bone, the implant fixture, the abutment, and the abutment screw was greater in the order of loading condition A, B and C. Conclusion : The stress distribution pattern of the internal connection system was mostly distributed widely to the lower part along the inner surface of the implant fixture contacting the abutment core through its contact portion because of the intimate contact of the abutment and the implant fixture and so the less stress was taken at the abutment screw, while the abutment screw can be the weakest portion clinically because the greater stress was taken at the abutment screw in case of the external connection system, and therefore the further clinical study about this problem is needed.